Vodavi Starplus Triad S Description Manual

CUSTOMER DATABASE PROGRAMMING
C-23> - . ^^^. . . .^. .- -. . * ..-.. .I. Koute uuu In tne IGLIU Klnglng Hsslgnment I able IS used as the intercept route. Calls to
numbers not contained in the DID table will follow Route 000. If Route 000 is defaulted to
“none”, the call will follow Route 001.
2. Route 001 in the 
ICLID Ringing Assignment Table is used for Busy calls. If Route 001 is
defaulted to “none”, the caller is given a busy tone. Calls to busy stations (i.e., without an
available Loop or CO button)...

C-24CUSTOMER DATABASE PROGRAMMING
1. Route 000 in the ICLID Ringing Assignment Table is used as the intercept route. Calls to
numbers not contained in the DID table will follow Route 000. If Route 000 is defaulted to
“none”, the call will follow Route 001.
2. Route 001 in the ICLID Ringing Assignment Table is used for Busy calls. If Route 001 is
defaulted to “none”, the caller is given a busy tone. Calls to busy stations 
(i.e., without an
available Loop or CO button) will follow Route 001.
Table C-8:...

CUSTOMER DATABASE PROGRAMMINGC-25
IIIII
I091 1 None 1II124 1124A 1
I
092INoneII/125I125AI
093None126126A
094None127
127A
095None128
-I 28A
096None129
129A
I097INoneI11 1 13OA 1130
I098INoneIII131I13lAI1. Route 000 in the 
ICLID Ringing Assignment Table is used as the intercept route. Calls to
numbers not contained in the DID table will follow Route 000. If Route 000 is defaulted to
“none”, the call will follow Route 001.
2. Route 001 in the ICLID Ringing Assignment Table is used for Busy calls. If Route...

C-26CUSTOMER DATABASE PROGRAMMING
IIIIII
1. Route 000 in the 
ICLID Ringing Assignment Table is used as the intercept route. Calls to
numbers not contained in the DID table will follow Route 000. If Route 000 is defaulted to
“none”, the call will follow Route 001.
2. Route 001 in the ICLID Ringing Assignment Table is used for Busy calls. If Route 001 is
defaulted to “none”, the caller is given a busy tone. Calls to busy stations (i.e., without an
available Loop or CO button) will follow Route 001.
Table...

CUSTOMER DATABASE PROGRAMMINGC-27
163163A196196A
164
164A197197A1. Route 000 in the 
ICLID Ringing Assignment Table is used as the intercept route. Calls to
numbers not contained in the DID table will follow Route 000. If Route 000 is defaulted to
“none”, the call will follow Route 001.
2. Route 001 in the ICLID Ringing Assignment Table is used for Busy calls. If Route 001 is
defaulted to “none”, the caller is given a busy tone. Calls to busy stations (i.e., without an
available Loop or CO button) will...

C-28CUSTOMER DATABASE PROGRAMMING
DESTINATIONASSIGNMENTSDESTINATIONASSIGNMENTS216216A243243A
217
217A244244A1. Route 000 in the 
ICLID Ringing Assignment Table is used as the intercept route. Calls to
numbers not contained in the DID table will follow Route 000. If Route 000 is defaulted to
“none”, the call will follow Route 001.
2. Route 001 in the 
ICLID Ringing Assignment Table is used for Busy calls. If Route 001 is
defaulted to “none”, the caller is given a busy tone. Calls to busy stations (i.e.,...

.CUSTOMER DATABASE PROGRAMMING
c-29
222222A249249A
223
223A250250A
224224A251
251A1. Route 000 in the 
ICLID Ringing Assignment Table is used as the intercept route. Calls to
numbers not contained in the DID table will follow Route 000. If Route 000 is defaulted to
“none”, the call will follow Route 001.
2. Route 001 in the ICLID Ringing Assignment Table is used for Busy calls. If Route 001 is
defaulted to “none”, the caller is given a busy tone. Calls to busy stations (i.e., without an
available Loop or...

CUSTOMER DATABASE PROGRAMMINGIssue I - November 1998STARPLUS Triad-S Product Description Manual 

CUSTOMER DATABASE PROGRAMMINGc-31LCR Class of Service (COS)
Off-Hook Preference Programming
Flexible Button Programming
Keyset Mode
Voice Mail ID Translation
Al9 10
All 0
All 100 
(Key-
set)
Refer to Flexible Button Proarammina Chart
E%~
Page “B” is selected by pressing PAGE B flexible
~*Features available with optional software.#
24 1700-131
Table C-9: Station Programming (FLASH 50)
STA#PORT#STA#PORT#Table C-10: Button Assignments (FLASH 50)
STARPLUS Triad-S Product Description ManualIssue I- November...

C-32CUSTOMER DATABASE PROGRAMMINGRefer to Table C-10: Button Assignments (FLASH 50) to assign a function to each flexible button.
Defaults:
QButtons 1 thru 12 are assigned as Stations 100 thru 111,
*Buttons 13 thru 18 are assigned as CO Lines 01 thru 06,
+Buttons 19 is assigned as a Loop button,
+z+Button 20 is assigned as a Pool Group button,
oButtons 21 thru 24 are flexible buttons with features assigned to them.
Where:BB = Button Number (01-24)
9LLL = CO Line Number (001-012)
3G = Line Group (l-7)
KEY...