Vodavi Starplus Sts Key System Installation Manual

							Configuration Tables2-3
Chapter 2 - System Specifications
Configuration Tables
The following tables and charts describe system capacities and display the configuration 
flexibility of the system.
System Capacity
Table 2-1: Function Capacity
Item Description
Account Codes
Number of digits per Account Code
Number of Account CodesUp to 12 digits
Unlimited-unverified / 256-verified
Attendants
Digital DSS/BLF ConsolesUp to 3 stations can be designated as attendant(s).
Each DSS/BLF unit requires 1 station port and reduces station 
capacity by 1.
DSS/BLF Maps may not be duplicated at one station.
One station may have up to 3 DSS units associated with it.
CO/PBX/Centrex Lines
Digital Terminal Stations
Standard Single Line Telephones24 (max) Loop Start (4 per LCOB)
48 (max) Digital Terminals (8 per DTIB)
22 (max) SLTs (4 per SLIB4, 2 per SLIB2)
Conference
Circuits
Parties per bridge10 Conference bridges per system
8 parties per bridge
Contacts (multipurpose) 1 (on BKSU)
DISA Circuits: Unlimited CO lines may be programmed simultaneously
DTMF Receivers
DTMF Sender2 (2 on BKSU, Each SLIB has 2 DTMFs on board)
No limit
Hunt Groups
Groups
Members
Ty pesSoftware supports 8 Groups
Software supports up to 8 stations in each Group
Station, Pilot, or All Ring Hunting
I/O Ports 2 (both on BKSU)
Music Channels
Music-On-Hold/Background Music inputs 1 Channel per system (on BKSU)
Paging
Internal Paging
External Paging (one or two way paging)8 (max) Internal Page Zones (software controlled)
1 (on BKSU)
Speed Dial Memory
Station Speed Dial
System Speed Dial
Total System Speed Dial bins20 Bins per Station (24 digits)
80 Bins per System (24 digits)
1000 
						

							2-4Visual Specifications
Chapter 2 - System Specification s
Visual Specifications
CO Line Buttons
UCD Groups
Groups
Members
RAN Announcements
Calls In QueueSoftware supports 8 Groups
16
Eight RAN announcements per system
All CO Lines (28) may be in queue for a UCD Group
Voice Ma il Groups
Groups
Members (ports)
Integration Method
VM Message Wait
VM Disconnect SignalSoftware supports 8 Groups
Software supports up to 24 stations in each Group
In-Band Signaling (DTMF)
[420] to turn on, [421] to turn off
Programmable 12 digit (DTMF) string. (If no digits are 
programmed, 15 secs of silence are followed by a busy tone and 
Loop interrupt.)
Table 2-2: Visual Signals - CO Line Buttons
Feature/Function Flash Rate
Incoming CO Ringing 30 ipm flash
CO Line in the Transfer mode 120 ipm flash
CO Line Recalling 480 ipm flutter
System HOLD 60 ipm double wink
Exclusive HOLD 120 ipm flash
I-HOLD 60 ipm wink
CO Line Queue Call Back 480 ipm flutter
CO Line in use ON steady
CO line Idle OFFTable 2-1: Function Capacity
Item Description 
						

							Visual Specifications2-5
Chapter 2 - System Specifications
DSS/BLF Buttons
Feature/Function Buttons
Table 2-3: Visual Signals - DSS/BLF Buttons
Feature / Function Flash Rate
Off-Hook (busy) ON steady
Incoming Intercom Ring 120 ipm flutter
Call Announce (H or P mode) Steady
Message Waiting Call Back 120 ipm flutter
Station in Do Not Disturb 480 ipm double flash
Camp On (by station) 120 ipm flash
Auto Call Back 120 ipm Flash
Station Unavailable 60 ipm flash
Table 2-4: Visual Signals - Feature / Function Buttons
Feature / Function Flash Rate
ON/OFF Button (while activated) ON steady
MUTE Button (when activated) ON steady
SPEED Button (while dialing) ON momentarily
FLASH Button (while depressed) None
TRANSFER Button (while depressed) Steady until TRANSFER complete
HOLD Button (during T ICM call) 15 ipm Flash
CONFERENCE - CONFERENCE ON steady
DND Button - when activated 60 ipm flash
FWD Button
All Forward
Busy forward
No answer forward
B/NA forwardON steady
ON steady
ON steady
ON steady
 MSG Button (when activated) 15 ipm flash 
						

							2-6Tone Specifications
Chapter 2 - System Specification s
Tone Specifications
Audible Signals
The Terminals provide ringing and confidence signals to the user and to calling parties 
according to Ta b l e 2- 5   and Ta b le  2 - 6 .
Table 2-5: Signals To Called Station (Digital Station)
Feature (Indication) Sound In Hz Occurrence (Cadence)
Incoming CO Line (*User Selectable) .8 sec on/2.4 sec off repeated
Intercom Tone Ringing (*User Selectable) .4 sec on/.4 sec off/
.4 sec on/2 sec off repeated
Intercom Call Announce (H & P) 935 .2 sec on/.2 sec off; 2 bursts
Transferred CO Line (*User Selectable) .8 sec on/2.4 sec off repeated
Line Recall (*User Selectable) .2 sec on/.6 sec off repeated
Message Waiting Call Back (*User Selectable) .4 sec on/.4 sec off/
.4 sec on/2 sec off repeated
Queued CO Line Call Back (*User Selectable) .2 sec on/.6 sec off repeated
Camp On 935 .2 sec burst
Alarm Tone - Repeated
- Single (continuous)701/857
701/857.25 sec on/.25 sec off; repeated
1.0 sec on; once (every 30-60 
secs until alarm is reset.
*  Only one tone can be selected by a station at a time. This tone will be used for all signaling that uses 
the User Selectable Tone. 
						

							Miscellaneous Specifications2-7
Chapter 2 - System Specifications
Miscellaneous Specifications
Table 2-6: Signals To Calling Station
Feature (Indication)Sound In Hz
Sta                    SLTOccurrence (Cadence)
Intercom Ring Back Tone 1215/1471 440/480 .5 sec on/2.5 sec off; 
repeated
Intercom Call Announce 935 935 .2 sec on/.25 sec off; 
three (3) times
Busy Tone 701 480/620 .5 sec on/.5 sec off; 
repeated
Error Tone 701 480/620 .25 sec on/.25 sec off; 
repeated
Intercom dial Tone 420 440/1350 Continuous
DND Tone 701 701 .2 sec on/.2 sec off; 
three (3) times pause, 
repeated
Paging Confirmation Tone 935 935 1 second burst
CONFERENCE Time Out Warning Tone 420 701 1 second burst
Programming Confirmation Tone 1471 935 3 short bursts
Programming Error Tone 1471 1471 .25 sec on/.25 sec off; 
six (6) times
Call Waiting 735 735 .5 burst
Table 2-7: Dialing Specifications
Item Specification
CO Type Loop Start / 600 ohm / current sensing
DTMF Signaling
Frequency Deviation
Rise Time
Duration of DTMF Signal
Inter-digit Time±1.5%
5ms
100ms (programmable)
100ms (programmable)
Pulse Dialing
Break/Make Ratio
Dialing Speed60/40 - 66/33
10-20 pps 
						

							2-8Miscellaneous Specifications
Chapter 2 - System Specification s
Table 2-8: Electrical Specifications
Item Specification
Contact Rating (multipurpose contacts) 1 amp, 24 VDC
External Page Port
Output Impedance
Output Power600Ω @ 0 dbm
5 milliwatt max
Music 
Source600Ω input at 2k ohm maximum from 
music source
Power Supply
AC Voltage Input
AC Power
AC Input Fuse
DC Output Voltage105 -129 Volt AC @47-63Hz
300 watts
+5a 250v
+ 30v
Table 2-9: Environmental Specifications
Item Degrees (ºF)
Operating Temperature 32 - 104
Optimum Operating Temperature 60 - 80
Storage Temperature -40 - 140
Relative Humidity 5 - 90% (non-condensing)
Table 2-10: Dimensions and Weights
ItemHeight Width Depth Weight
in mm in mm in mm lbs kg
KSU (w/o cover) 11.125 283 15 381 4.625 117 11 4.9
Digital Keyset 9.25 234 7.625 194 4.75 121 2 0.9
Digital DSS/BLF Console 9.25 234 4.9 124 3.3 84 2 0.9 
						

							System Part Numbers2-9
Chapter 2 - System Specifications
System Part Numbers
The following table may be used to order the STS system parts that are currently available.
Table 2-11: STS Par t Numbers
Description Part Number
STS Basic Key Service Unit (BKSU) 3500-00
STS Expansion Key Service Unit (EKSU) 3502-01
Caller ID Unit (CIDU) 3531-04
Digital Key Telephone Unit (DKTU) - 24 Button 3515-71
Digital Telephone Interface Board (DTIB) (8 port) 3532-00
DSS - 48 Button 3510-71
DTMF Receiver Unit (DTRU4) (4 circuit) 3031-60
Loop-Start Central Office Board (LCOB) w/caller ID (4 port) 3531-03
Message Wait Unit (MSGU48) 3033-10
Modem Unit (MODU) - 9600 baud 3530-30
Phase Lock Loop Unit (PLLU) 8030-40
Single Line Adapter  (SLA) 9854-00
Single Line Telephone Interface Board (SLIB2) (2 port) 3533-01
Single Line Telephone Interface Board (SLIB4) (4 port) 3533-00
T1 Interface Board ( T1IB) (24 channel D4AMI / B8ZS) 3531-31
VM Interface Board ( VMIB) (Flash-based - 3 hour) 3534-00
VM Interface Board Memory Expansion Module (Flash-based 
upgrade - addl 6 hrs)3534-01
VM Interface Board ( VMIB) (Pentium-based) future 
						

							2-10System Part Numbers
Chapter 2 - System Specification s 
						

							3
Installation
This chapter provides the basic system installation and wiring instructions for the STS, as well 
as how to install the optional cards and interface units.