Vodavi Starplus 1224ex Electronic Key System Installation Manual

. rs,..i-, , L _ ,,,.: .,,. x.. .., I.‘ , . . . . 
, 1 .A.‘. . . ..I a- ..- 
STARPLUS 1224u( KEY TELEPHONE SYSTEM 
-- 
600.20 TIMERS 
PROGRAMMING STEPS 
If you are in the program mode, continue using the 
program codes. If you are starting to program 
here, enter the program mode first. DESCRIPTION 
Exclusive Hold Recall 
To change this timer, dial an (*) asterisk 
. 
and 22 on the dial pad. 
lf you have a display phone, you will see the follow- 
ing: This refbcts the time before an outside line 
placed...

STARPLUS 1224EX KEY TELEPHONE SYSTEM 
. 
I 
! 
I a 
PROGRAMMING STBPS 
Transfer Recall 
. To change this timer, dial an (*) asterisk 
and 
24 on the dlai pad. 
If you have a display phone, you will see the follow- 
ing: DESCRlPTlON 
. 
Thls timer refiects the amount of time before an 
unanswered transfer is recalled to the station 
that initiated it. if the call is still unanswered for 
an additlonal equal amount of time, it will recall 
the attendant and lf unanswered by the atten- 
dant will recall all...

., .“, 
i.‘,,.~ -,.*. L,.L-...LL-;-bL .* . ..\. ‘&r..‘” .‘.‘r... I . ..Ic’-2..’ _. ’ .-. I’ . . . .’ ’ - .- . . . .._ .,...I’. . . . . . . . .,I , . .._ 
STARPLUS 1224EX KEY TELEPHONE SYSTEM 
PROGRAMMING STEPS 
Pause Timer 
. To change this timer, dial an (*) asterisk 
and 26 on the d&i pad. 
if you have a display phone, you will see thefdlow- 
ing: 
PAUSE TIMER 
2 SECONDS 
Dial a 1 digit entry between 1 and 9 
. (seconds). 
. Press HOLD to enter data. 
Display will now update. DESCRIPTION 
When dialing...

_ , ,.. _. -_.. .--- 
STARPLUS 1224EX 
-- KEY TELEPHONE SYSTEM 
600.21 EXECUTIVE/SECRETARY ASSIGNMENTS 
PROGRAMMING STEPS 
lf you are in the programming mode, continue 
using the program codes. If you are starting to 
program here, enter the program mode first. 
. To program executive/secretary assign- 
ments, dial an asterisk (*) and 27 on the 
dial pad. 
If you have a display phone, you will see: 
. 
DESCRIPTION 
There are 4 sets of Executive/Secretary pairs 
available for assignment. When the...

STARPLUS 1224EX KEY TELEPHONE SYSTEM 
600.22 LOUD l33L/A4EAD 
/ 
1 
PROGRAMMING STEPS PESCRlPTlON 
If you are in the programming mode, continue 
using the program codes. if you are starting to 
program here, enter the program mode first. Four contacts are available to be assigned 
either as loud bell control or as A-Lead indica- 
tion. 
. Dial an asterisk (*) and 28 on the dial pad. A Loud Bell contact can be assigned to any sta- 
ticns and will follow the ringing assignments of 
the assigned station...

. 
. 
..* _ .- 
STARPLUS 1224EX KEY TELEPHONE SYSTEM 
600.23 P5X DWIJNG CODES 
PROGRAMMING STEPS 
If you are in the programming mode, continue 
using the program codes. If you are starting to 
program here, enter the program mode first. 
. To enter PBX Dialing codes, dial an 
asterisk (*) and 31 on the dial pad. DESCRIPTION 
Four 1 or 2 digit PBX access codes can be 
entered into system memory. When dialed they 
signal the system that an access code is being 
dialed and that toll restriction is to be...

. . ..:, 
,. . . . 8’ .* 
A,‘,)-.* dI,.:. ,.,;QdiLl;l..: .- 
d .,’ . . ._,. “.. .‘..’ .- ,. , . . ;. ,,. ,, , ., 
.-IL..*-1 ..,. . . ..I..’ +* ,a-,.* . . .- - I,- 
STARPLUS 1224EX KEY TELEPHONE SYSTEM 
-- 
600.24 AllEN T POSITION 
PROGRAMMING STEPS 
If you are in the programming mode, continue 
using the program codes. If you are starting to 
program here, enter the program mode first. 
. If you wish to change the attendant posi- 
tion, dial an asterisk (*) and 32 on the dial 
pad. 
. Press the station...

._,_ ,_ ,.. .- 
STARPLUS 1224Ex KEY TELEPHONE SYSTEM 
600.26 PRESEr CALL FORWARD 
. 
. 
j a 
, 
. 
PROGRAMMING STEPS 
. If you wish to assign a preset forward posi- 
tion to a station, dial an (*) asterisk and 34 
on the dial pad. ’ 
If you have a display phone, you will see: 
. Press the station button for the station 
being given a preset forward position.* 
. Then press the station button of the sta- 
tion which is to receive the forwarded ring- 
ing.* 
. Press HOLD to enter. 
. 
DESCRlPTlON 
Ringing...

,J.;.- :,‘:.,,.J ..,, .dd 2s s. i:,, ..:L.‘\: , , _ :.. :r: ,..-‘.- ..‘. ,* :... ..-; , ._.. I,. . . 
STARPLUS 1224EX KEY TELEPHONE SYSTEM 
--- 
600.27 CONFERENCE TIMER 
I 
PROGRAMMING STEPS 
If you are in the programming mode, continue 
using the program codes. If you are starting to 
program here, enter the program mode first. DESCRIPTION 
This timer reflects the amount of time a con- 
ference circuit will remain active if the initiator of 
the conference is no longer in a multi line con- 
ference. ....

. 
I 9 
/ 
I 
I 
l 
PROGRAMMING STEPS 
. Press the program button to determine 
baud rate. 
_ LED off = 1200 baud 
_ LED on = 300 baud 
. Press the program button to determine 
print format. 
- LED off = 29 character 
- EDon= 80 character 
. Press HOLD to enter data. DESCRlPllON 
Thebaudratecanbesetat3OOor12CjObaud. 
By default the baud rate is set at 300 (LED’ on). 
Print format can be set at either 29 characters 
or 80 characters. By defautt format is 29 charac- 
ters (LED off). 
FORMAlS 
29 ctlaracter...