Vodavi Starplus 1224ex Electronic Key System Installation Manual

STARPLUS 1224EX KEY TELEPHONE SYSTEM 
.-- 
600.11 PICKUP GROUPS 
PROGFIAMMING STEPS 
DESCRIPTION 
If you are in the programming mode, continue 
using the program codes. If you are starting 
programming here, enter the program mode first. 
. If pickup groups are to be changed, dial 
an asterisk (*) and 07 on the dial pad. 
. Press the station button of the station to 
be changed. Press STATION RANGE but- 
ton first for stations 22-33. 
e Toggle on or off the program button for the 
desired pickup group....

STARPLUS 1224= KEY TELEPHONE SYSTEM 
-- 
600.12 PROGRAMMING BASIC TELEPHONES 
f? ; 
. 
PROGRAMMING STEPS 
If you are in the programming mode, continue 
using the program codes. If you are starting to 
program here, enter the program mode first. 
Dial an asterisk (*) and 08 on the diai pad. 
Press the station button of the station 
being assigned a Basic telephone. 
Press the program button indicated 
below. 
Press HOLD to enter. 
To assign DSEVBLF press station button of 
station port the DSS console is...

>.j ..___.,, L,...... ‘.“,-.-..I... . . ., 
.. . 
STARPLUS 1224EX KEY TELEPHONE SYSTEM 
600.13 CO LINE GROUPS 
PROGRAMMING STEPS 
If you are in the programming mode, continue 
using the program codes. if you are starting to 
program here, enter the program mode first. 
l 
To assign CO line groups, dial an asterisk 
(*) and 11 on the dial pad. 
. Press the CO line as indicated in the 
program buttons below. For CO line 
groups 7 and 8, press GROUP RANGE 
button first. 
. Then press the button for the CO...

if you are in the programming mode, continue 
using program codes. if you are starting to 
program here, enter the program mode first. 
. if any CO line features are to be changed, 
dial an asterisk (*) and 12 on the dial pad. 
. Press the CO line button of the line to be 
programmed. 
. Toggle the program buttons on or off so 
the LED’s light up or extinguish. 
. Press HOLD to enter data. 
600.14 CO UNE DATA 
DESCRlPTlON . 
Llne Type (CO/PM) 
Each individual outside line can be 
programmed to be either...

STARPLUS 1224EX KEY TELEPHONE SYSTEM 
other stations from accessing the private line, 
consideration must also be given to Pool but- 
ton & CO line group assignments. Assign the 
private line to a separate CO line Group. See 
flexible button programming (sec. 600.9). 
By default no lines are marked as private lines 
(ED off). 
600.15 CO LINE RINGING 
PROGRAMMING STEPS 
If you are in the programming mode, continue 
using the program codes. If you are starting to 
program here, enter the program mode...

. 
I 
/ - 
STARPLUS 1224E.x KEY TELEPHONE SYSTEM 
600.16 FLASH TIMER 
PROGRAMMING STEPS 
lf you are in the programming mode, continue 
using the program codes. if you are starting to 
program here, enter the program mode first. 
. If the flash timer is to be changed, dial an 
asterisk (*) and 15 on the dial pad. 
If you have a display phone, you will see: 
FLASH TIMER 
2.0 SECONDS 
. Press the CO line which is to be 
programmed (see following program but- 
tons). 
. Enter the 2 digit timer value on the...

.c.3-‘tl~.r.~...‘J.,.~.,-‘- . . . . . .‘..1 - . . 
STARPLUS 1224EX KEY TELEPHONE SYSTEM 
^-- 
600.17 CO RING DETECT 
PROGRAMMING STEPS 
If you are in the programming mode, continue 
using the program codes. if you are starting to 
program here, enter the program mode first. 
. If CO Ring Detect timing is to be changed, 
dial an asterisk (*) and 16 on the d&i pad. DESCRIPTION 
The duration of the ringing signal from the CO 
or PBX is matched with ringing detection cir- 
cuftry in the KSU. The ring detect...

600.18 DIAL PULSE 
PROGRAMMING STEPS 
. If pulses per second (pps) and 
break/make ratios need to be changed, 
press the (*) & dial 17 on the dial pad. 
’ . 
Press CO line button for line which is to be 
assigned dial pulse. Then press the ap- 
propriate program button. 
. 
. Press HOLD to enter data. 
The next outside line button will light for program- 
ming. 
. 
DESCRIPTION 
Each CO (outside) line can send dial pulse sig- 
nals to the receiving central office. The 
break/make ratio and pulses per...

STARPLUS 1224EX KEY TELEPHONE SYSTEM 
600.19 SYsl’IEM DATA 
PROGRAMMING STEPS 
If you are in the programming mode, continue 
using the program codes. If you are starting to 
program here, enter the program mode first. 
. To change any system data, dial an 
asterisk (*) and 21 on the dial pad. 
. Toggle the program buttons on or off so 
the LED’s light or extinguish for desired 
features. 
- LED on = enabled 
- LED off = disabled 
. Press HOLD to enter data. DESCRIPTION 
I-ins Queuing 
If thh. button is...

. 
9 
. 
. 
STARPLUS 1224EK KEY TELEPHONE SYSTEM 
Automatic Privacy 
A yes entry (LED lit) means that privacy is 
automatically provided on all communications 
in the system. To eliminate privacy, toggle the 
button so the LED extinguishes. Privacy is 
enabled by default (LED on). 
If privacy is eliminated, only one other station 
may join in on an existing conversation. 
Alarm Enable 
A yes entry (LED lit) means the system is 
programmed for alarm. Stations must then be 
programmed to receive the alarm...