Vodavi Starplus 1224ex Electronic Key System Installation Manual

.__L,\..__.( __,, .,._ -*_.A ,._. .__I.. .I . 
STARPLUS 1224EX KEY TELEPHONE SYSTEM 
1224 KSU 
WITH COVER 
OFF SIU 
SOCKET 
MOUNTING 
SCREWS 
RS232C 
CONNECTOR 
0 ,  7 
/ 
-.- 
G : 
0 n 
0 
SIU 
BOARD 
0 
R 
S 
2 
II 
m 
3 
: MOUNTING 
SCREWS 
/ 
RCU & SIU Installation 
Figure 
5.8  

600.1 INTRODUCTION 
by pressing the asterisk (*) and entering that 
program code. 
The 1224 Key Telephone system can be 
programmed to meet each customer’s individual 
needs. All programming is done at station 10 using 
the Enhanced or Executive model key telephone 
as the programming 
inStrUfTient. 
A BASIC model telephone cannot be used. 
It is strongly recommended that the Executive 
telephone be used to make programming easier. When programming features, tones are 
provided to help the programmer...

. . ,( .., ,.. ., . . ‘__. . . . , ; I. ., .> . ../ ,h_.._,. 
.,., . ..I;‘ _,,- ‘,.,‘.;,.,:J:, L !.. ,. : 0 . ’ *. -. 
STARPLUS 1224u< KEY TELEPHONE SYSTEM 
600.4 PROGRAM MODE ENTRY 
Programming is always done at station port 01 
using either the Enhanced or Executive key 
telephone. The Basic Telephone cannot be used 
for programming. Programming is always done at 
this station regardless of the class of service or in- 
tercom number assigned to this station or which 
station has been assigned as the...

STARPLUS 1224u< KEY TELEPHONE SYSTEM 
600.6 STATION CLASS OF SERVICE 
. 
. 
PROGRAMMING STEPS 
Make sure you have entered the programming 
mode (Sec. 600.4). 
. If you wish to change the class of service 
of a station, dial an (*) asterisk & 01 on the 
dial pad. 
. Press the button of the station to be as- 
signed a class of service. If the station is 
22-33, press STATION RANGE button 
first. 
. Then press appropriate button for the 
class of service being assigned to that sta- 
tion - see beiow....

STARPLUS 1224EX -.-- KEY TELEPHONE SYSTEM. 
600.7 SW4TlON PROGRAMMING 
PROGf3AMMlNG STEPS 
If you are in the programming mode, continue 
using the program codes. If you are starting to 
program here, enter the program mode first (Sec. 
600.4). 
. 
if station features are to be changed, dial 
an asterisk (*) and 02 on the dial pad. 
. Press the button of the station to be 
programmed. If stations 22-33 are being 
programmed, press STATION RANGE 
button first (LED will light). 
. Then toggle on or off the...

STARPLUS 1224EX KEY TELEPHONE SYSTEM 
PROGFIAMMING STEPS 
0 To program further station features, d&l 
an asterisk (*) and 03 on the dial pad. 
. Press the button of the station to be 
programmed. If station 22-33 are being 
programmed, press STATION RANGE 
button first. 
. Then toggle on or off the following 
program buttons depending on what fea- 
tures that station is to be given. 
. Press HOLD to enter. 
The next station button will light for programming. select a station or speed number. Refer to...

. . ..__. L_ . . . . ,.... ‘._I ._...I . . . -.. . . . 
STARPLUS 1224EX 
KEY TELEPHONE SYSTEM 
600.8 FLDClBLE STATiON NUMBERS 
PROGRAMMING STEPS 
If you are in the programming mode, continue 
using the program codes. If you are starting to 
program here, enter the program mode first. 
. If station intercom numbers are to be 
changed, dial an asterisk (*) and 04 on the 
dial pad. 
If you have a display phone, you will see the foliow- 
ing display: 
FLEXIBLE STATION ASSIGN 
PORT 01 = STA 10 
I 
. Press the...

STARPLUS 1224EX KEY TELEPHONE  SYSTEM 
-._--_ 
600.9 FLEXIBLE  BlJlTONS 
. 
. 
PROGRAMMING  STEPS 
if  you  are in the  programming  mode, continue 
using  program  codes. If you  are starting  to 
program  here,  enter  the program  mode first. 
. To program  your flexible  buttons,  diai an 
asterisk  (*) and  05  on  the diai  pad. 
if  you  have  a display  phone, you will see  the foiiow- 
ing  display: 
FLEX  BLITTON  ASSIGN 
ENTER  STA #, PRESS  HOLD 
.  Dial  the 2 digit  station  number  (1033)....

.,, ..C. ._._: L ,.‘.a-*. -L 
STARPLUS 1224EX KEY TELEPHONE SYSlEM 
PROGRAMMING STEPS 
You will see a display like the following: DESCRIPTION 
When programming a button as a poolecJ group 
button, refer to CO line group programmjng. 
Pooled group numbers match CO line group 
numbers 
All stations should be given a loop button so 
they can receive a transferred call on a line for 
which they have no button access. 
. D&l the desired code to assign button A DSS button MUST be assigned to stations...

. 
. 
I . 
STARPLUS 1224EX KEY TELEPHONE SYSTEM 
600.10 PAGE GROUPS 
PROGRAMMING STEPS 
If you are in the programming mode, continue 
using the program codes. If you are starting 
programming here, enter the program mode first. 
. If page groups are to be changed, dial an 
asterisk (*) and 06 on the dial pad. 
. Press the station button of the station to 
be changed. Press STATION RANGE but- 
ton first for station 22-33 (LED will light). 
. Toggle on or off the program button for the 
desired page group....