Vodavi Discovery Ip Techical Guide

5-26 MANAGING CONFIGURATION THROUGH THE WEB INTERFACE
System ConfigurationAugust 1999
3. The main screen is the first screen seen as in Figure 38, the Control Panel:
Figure 38: Control Panel of Web Interface 

MANAGING CONFIGURATION THROUGH THE WEB INTERFACE 5-27
August 1999System Configuration
To configure Discovery IP settings, select Configure from the control panel. The screens 
containing many of the same settings as described in Figure 32, Discovery IP Configuration—
Step 1, are displayed in Figure 39 and 40:
Figure 39: Discovery IP Configuration Through Web Interface 

5-28 MANAGING CONFIGURATION THROUGH THE WEB INTERFACE
System ConfigurationAugust 1999
Figure 40: Discovery IP Configuration Through Web Interface (continued)
Current port status may be monitored by selecting Current Status from the Control Panel. the 
screen that displays enables the resetting of each port (clear port) as well as resetting each port’s 
DSP (reset DSP). Figure 41 displays this screen: 

MANAGING CONFIGURATION THROUGH THE WEB INTERFACE 5-29
August 1999System Configuration
Figure 41: Port Status Monitoring Through Web Interface 

5-30 MANAGING CONFIGURATION THROUGH THE WEB INTERFACE
System ConfigurationAugust 1999 

Discovery IP Technical Manual August 1999
6 System Operation
THE RUNNING PROGRAMS
Programs Which Must be Run for Each Configuration
View the started/stopped status of the required running programs by pressing P
 (for “processes”) 
in the System Status screen. The screen shown in Figure 42 displays these programs.
Figure 42: List of Running Programs as Seen in System Status Screen
When choosing to stop 
dvg, specify whether to stop running only 
when all lines are onhook (Graceful Shutdown –YES) or to...

6-2 MONITORING Discovery IP ACTIVITY
System OperationAugust 1999
Locations of Running Programs 
MONITORING Discovery IP ACTIVITY
View the real-time status of each port of a Discovery IP (each port configured using dvgconfig
) 
using the system status screen, as illustrated in Figure 43.
You may choose to display the information in single column (press SHIFT+1
), two column 
(press SHIFT+2
), or three column format (press SHIFT+3
), depending on the size of your 
screen and number of ports you wish to...

MONITORING Discovery IP ACTIVITY 6-3
August 1999System Operation
Figure 43: Port Monitoring via 
dvgstatus
Table 10: Status Messages For Each Port
One-column Two Column Three-column
ONHOOK ONHOOK ONHK
VOICE MAIL VOICEMAIL VMS
RING ON RING ON RGON
OFFHOOK OFFHOOK OFFHH
CONNECTED CONNECTED CONN
RING OFF RING OFF RGOFF
DIALTONE WAIT
(at destination Discovery IP)DIALTONE DTONE
GATEKEEPER REMOTE 
(communicating with remote gatekeeper)GATEKEEPER GATE
Discovery IP, Vodavi Communications Systems, Inc.
System...

6-4 COLLECTING CALL DETAIL RECORDS
System OperationAugust 1999
The number of calls placed through each port is displayed preceding the status of the port. Use 
arrow keys to move between ports, press ENTER
 while a selected port is highlighted to view 
the long-version status information for that port.
The top right of the screen lists the programs which are running:
†D
 for 
dvg (executable)
†G
 for 
vgate
COLLECTING CALL DETAIL RECORDS
Call Detail Records (CDR) can only be collected when using Internal...

RECORD A VOICE FILE MESSAGE 6-5
August 1999System Operation
RECORD A VOICE FILE MESSAGE
The user must repeat the entire below procedure to record each voice file.
1. Call the Discovery IP.
2. When prompted to enter a subscriber ID and PIN, press 
#.
3. To record message mmm (refer to Table 11), enter 
* * 1mmm#, wait about 3 seconds, then 
begin speaking.
4. Hang up (quietly) when finished recording the voice file.
5. Restart the 
dvg process in order to hear the recorded files: To listen to message mmm,...