ViewSonic Projector Pj1173 User Manual

PJ1173ViewSonic66

Equipment connection and network setting
Manual network connection setting (continued)
2)  Click “Connections” tab and then click [LAN Settings] button to open “Local 
Area Network (LAN) settings”.
“Internet Properties” window
“Internet Option” setting
1)  Click “Internet Options” in “Network and Internet Connections” window  
to open “Internet Properties” window.
“Network and Internet Connections” window
Click
Click 

PJ1173ViewSonic67

Equipment connection and network setting
Manual network connection setting (continued)
“Logon Menu”
Check connection
Check PC and projector are connected properly here. If it is not connected, check 
cable connections and settings are properly or not.
1) Start browser in PC and specify following URL, then click “Go” button.
“Local Area Network (LAN) Settings” window
3) Uncheck all boxes in “Local Area Network (LAN) Settings” window.
URL: http://(Projector IP address)/
 
For example,...

PJ1173ViewSonic68

Management with Web browser software
Configuring and Controlling the Projector via a Web Browser
You can change the settings of or control the projector via a network by using a 
web browser from a PC that is connected to the same network.
E-mail Alerts
The projector can automatically send an alert to specified e-mail addresses when 
the projector requires maintenance or has encountered an error.
Projector Management using SNMP
This projector is SNMP (Simple Network Management...

PJ1173ViewSonic69

Management with Web browser software
 
Configuring  and  controlling  the  projector  via  a  web 
browser
You can adjust or control the projector via a network from a web browser on a PC 
that is connected to the same network.
• Internet Explorer 5.5 or later is required.
• If JavaScript is disabled in your web browser configuration, you must enable 
JavaScript in order to use the projector web pages properly. See the Help files 
for your web browser for details on how to enable...

PJ1173ViewSonic70

Management with Web browser software
When configuring or controlling the projector via a web browser, an ID and 
password are required. There are two types of IDs, Administrator ID and User ID. 
The following chart describes the differences between Administrator and User IDs.
Configuring and controlling the projector via a web browser (continued)
ItemDescriptionAdministratorUser
Network InformationDisplays the projector’s current network configuration settings.√√
Network...

PJ1173ViewSonic7

Management with Web browser software
Configuring and controlling the projector via a web browser (continued)
Logon
Refer to the following for configuring or controlling the projector via a web browser. 
)  Enter “http://192.168.1.10/” into the address 
bar of the web browser and press “Enter” 
key or click “Go” button.  The screen in Fig. 
3..a will be displayed.
2)  Enter your ID and password and click 
[Logon].
Example: If the IP address of the projector is set to...

PJ1173ViewSonic7

Configuring and controlling the projector via a web browser (continued)
Network Information
All screen drawings in this manual are shown 
when you logon with the Administrator ID. 
Any functions that are available only for the 
Administrator will not be shown when you logon 
with the User ID. Refer to the table.
Management with Web browser software
Displays the projector’s current network configuration settings.
ItemDescription
Projector NameDisplays the projector name settings....

PJ1173ViewSonic73

Management with Web browser software
Configuring and controlling the projector via a web browser (continued)
Network Settings
Displays and configures network settings.
ItemDescription
IP ConfigurationConfigures network settings.
DHCP ONEnables DHCP.
DHCP OFFDisables DHCP.
IP AddressConfigures the IP address when DHCP is disabled.
Subnet MaskConfigures the subnet mask when DHCP is disabled.
Default GatewayConfigures the default gateway when DHCP is disabled.
Projector Name
Configures...

PJ1173ViewSonic74

Configuring and controlling the projector via a web browser (continued)
Management with Web browser software
• The new configuration settings are activated after restarting the 
network connection. When the configuration settings are changed, you must 
restart the network connection. You can restart the network connection by 
clicking [Network Restart] on the main menu.
• If you connect the projector to an existing network, consult a network 
administrator before setting server...

PJ1173ViewSonic75

Management with Web browser software
Configuring and controlling the projector via a web browser (continued)
Port Settings
Displays and configures communication port settings.
ItemDescription
Network Control Port1 (Port:23)Configures command control port 1 (Port:23).
Port openClick [Enable] check box to use port 23.
AuthenticationClick [Enable] check box when authentication is required for this port.
Network Control Port2 (Port:9715)Configures command control port 2 (Port:9715).
Port...