ViewSonic Projector Pj1173 User Manual

PJ1173ViewSonic6

Remote control
Using as a wired remote control
The accessory remote control works as a wired remote control, 
when the wired control port at the bottom of the remote control 
connects with the REMOTE CONTROL port on the back of the 
projector via an audio cable with 3.5 diameter stereo mini plugs.
When the remote control signal is hard to reach surely to 
the projector in the environment, this function is effective.
• To connect the remote control with the projector, use an audio...

PJ1173ViewSonic7

.Make sure that the power cord is firmly and 
correctly connected to the projector and the outlet.
Power on/off
Turning on the power
.Remove the lens cover, and set the power switch 
to the ON position (marked “ I “).  
The power indicator will light up in steady orange. 
Then wait several seconds because the buttons 
may not function for these several seconds. 
3.Press the STANDBY/ON button on the projector or 
the remote control.
• Turn the power on/off in right order....

PJ1173ViewSonic8

(*)        RGB 1          RGB 2          HDMI   
          VIDEO  S-VIDEO  COMPONENT (Y, CB/PB, CR/PR)
Operating
Operating
.Press the VOLUME button on the remote control. 
A dialog will appear on the screen to aid you in adjusting the volume.
Adjusting the volume
BLANKLASER
ASPECT
 ESC MENU RESET   POSITION AUTO    MAGNIFY MY BUTTON VOLUME ON 1    MUTE OFF 2 FREEZE KEYSTONE SEARCH 
PUSH ENTER
 PAGE UP  PAGE DOWN
 STANDBY/ON VIDEO RGB
LASERINDICATOR
BLANKLASER
ASPECT
 ESC...

PJ1173ViewSonic9

Operating
.Press the VIDEO button on the remote control to select an 
input for video signal.  
Each time you press the button, the projector switches its 
video input port as below. 
Selecting an input signal (continued)
●  If the VIDEO button is pushed (when switching from RGB to VIDEO signals) 
when TURN ON is selected for the AUTO SEARCH item in the OPTION menu 
the projector will check the COMPONENT (Y, CB/PB, CR/PR) port first. If no input 
is detected at the port, the...

PJ1173ViewSonic0

Operating
• When the vertical lens shift 
is adjusted, it is recommended to shift 
the picture upward.
NOTE
.Use the zoom ring to adjust the screen size.
Adjusting the zoom and focus
.Use the focus ring to focus the picture.
BLANKLASER
ASPECT
 ESC MENU RESET   POSITION AUTO    MAGNIFY MY BUTTON VOLUME ON 1    MUTE OFF 2 FREEZE KEYSTONE SEARCH 
PUSH ENTER
 PAGE UP  PAGE DOWN
 STANDBY/ON VIDEO RGB
LASERINDICATOR
2/5 
1/10 
1/10 
Zoom ringFocus ring
Top
.Use the...

PJ1173ViewSonic

Operating
.Press the POSITION button on the remote control. 
The “POSITION” indication will appear on the screen.
Adjusting the position
.Use the ▲/▼/◄/► cursor buttons to adjust the picture position.
When you want to reset the operation, press the RESET 
button on the remote control during the operation.
To complete this operation, press the POSITION button 
again. Even if you do not do anything, the dialog will 
automatically disappear after a few seconds.
●  When...

PJ1173ViewSonic

Operating
• The zoom level can be finely adjusted. Closely watch the screen to 
find the level you want.
NOTE
BLANKLASER
ASPECT
 ESC MENU RESET   POSITION AUTO    MAGNIFY MY BUTTON VOLUME ON 1    MUTE OFF 2 FREEZE KEYSTONE SEARCH 
PUSH ENTER
 PAGE UP  PAGE DOWN
 STANDBY/ON VIDEO RGB
LASERINDICATOR
BLANKLASER
ASPECT
 ESC MENU RESET   POSITION AUTO    MAGNIFY MY BUTTON VOLUME ON 1    MUTE OFF 2 FREEZE KEYSTONE SEARCH 
PUSH ENTER
 PAGE UP  PAGE DOWN
 STANDBY/ON VIDEO RGB...

PJ1173ViewSonic3

Operating
BLANKLASER
ASPECT
 ESC MENU RESET   POSITION AUTO    MAGNIFY MY BUTTON VOLUME ON 1    MUTE OFF 2 FREEZE KEYSTONE SEARCH 
PUSH ENTER
 PAGE UP  PAGE DOWN
 STANDBY/ON VIDEO RGB
LASERINDICATOR
.Press the BLANK button on the remote control.  
The blank screen will be displayed instead of the screen of 
input signal. Please refer to the BLANK item in SCREEN 
menu.
To exit from the blank screen and return to the input signal 
screen, press the BLANK button again....

PJ1173ViewSonic4

Operating
.Press the MENU button on the remote control or one of the cursor 
buttons on the projector. 
The Advanced MENU, or EASY MENU that has priority just after 
powered on, will appear. 
If you want to move the menu position, use the cursor buttons after 
pressing the POSITION button. While the projector is displaying any 
menu, the MENU button on the projector works as the cursor buttons.
Using the menu function
.If you want to change it to the Advanced MENU,...

PJ1173ViewSonic25

EASY MENU
EASY MENU
From the EASY MENU, items shown in the table below 
can be performed.
Select an item using the ▲/▼ cursor buttons on the 
projector or remote control. Then perform it according to 
the following table.
ItemDescription
ASPECTUsing the ◄/► buttons switches the mode for aspect ratio.See the ASPECT item in IMAGE menu.
AUTO 
KEYSTONE EXECUTE
Using the ► button executes the auto keystone function.See the AUTO KEYSTONE  EXECUTE item in SETUP menu.
KEYSTONE Using the ◄/►...