ViewSonic Projector Pj1173 User Manual

PJ1173ViewSonic6

EASY MENU
EASY MENU (continued)
ItemDescription
BRIGHTNESSUsing the ◄/► buttons adjusts the brightness.See the BRIGHTNESS item in PICTURE menu.
CONTRASTUsing the ◄/► buttons adjusts the contrast.See the CONTRAST item in PICTURE menu.
COLORUsing the ◄/► buttons adjusts the strength of whole color.See the COLOR item in PICTURE menu.
TINTUsing the ◄/► buttons adjusts the tint.See the TINT item in PICTURE menu.
SHARPNESSUsing the ◄/► buttons adjusts the sharpness.See the SHARPNESS...

PJ1173ViewSonic7

PICTURE Menu
PICTURE Menu
From the PICTURE menu, items shown in the table 
below can be performed. 
Select an item using the ▲/▼ cursor buttons on the 
projector or remote control, and press the ► cursor 
button on the projector or remote control, or the ENTER 
button on the remote control to execute the item. Then 
perform it according to the following table.
ItemDescription
BRIGHTNESSUsing the ▲/▼ buttons adjusts the brightness.Light ó Dark
CONTRASTUsing the ▲/▼ buttons adjusts...

PJ1173ViewSonic8

PICTURE Menu
PICTURE Menu (continued)
ItemDescription
COLOR TEMP
Using the ▲/▼ buttons switches the color temperature mode.
To adjust CUSTOM
Selecting a mode whose name includes CUSTOM and then pressing the ► button or the ENTER button displays a dialog to aid you in adjusting the OFFSET and GAIN of the selected mode.
OFFSET adjustments change the color intensity on the whole tones of the test pattern.
GAIN adjustments mainly affect color intensity on the brighter tones of the...

PJ1173ViewSonic9

ItemDescription
ACTIVE IRIS
Using the ▲/▼ cursor buttons changes the active iris control mode.
PRESENTATION  ó  THEATER  ó  TURN OFF               
Feature
PRESENTATIONThe active iris displays the best presentation image for both bright and dark scenes.
THEATERThe active iris displays the best theater image for both bright and dark scenes.
TURN OFFThe active iris is always open.
• The screen may flicker when the PRESENTATION or THEATER modes are selected. If this occurs select...

PJ1173ViewSonic30

IMAGE Menu
IMAGE Menu
From the IMAGE menu, items shown in the table below 
can be performed.
Select an item using the ▲/▼ cursor buttons on the 
projector or remote control, and press the ► cursor button 
on the projector or remote control, or ENTER button on 
the remote control to execute the item. Then perform it 
according to the following table.
ItemDescription
ASPECT
Using the ▲/▼ buttons switches the mode for aspect ratio. For an RGB signalNORMAL ó 4:3 ó 6:9 ó SMALL...

PJ1173ViewSonic3

IMAGE Menu
IMAGE Menu (continued)
ItemDescription
H PHASE
Using the ▲/▼ buttons adjusts the horizontal phase to eliminate flicker .
Right ó Left
• This item can be selected only for an RGB signal or a component video signal. (except 525i (480i), 625i (576i), SCART RGB input from the COMPONENT port)
H SIZE
Using the ▲/▼ buttons adjusts the horizontal size.
Large ó Small
• This item can be selected only for an RGB signal.
• When this adjustment is excessive, the picture may not be...

PJ1173ViewSonic3

INPUT Menu
INPUT Menu
From the INPUT menu, items shown in the table below 
can be performed.
Select an item using the ▲/▼ cursor buttons on the 
projector or remote control, and press the ► cursor 
button on the projector or remote control, or ENTER 
button on the remote control to execute the item. Then 
perform it according to the following table.
ItemDescription
PROGRESSIVE
Using the ▲/▼ buttons switches the progress mode.
TV ó FILM ó TURN OFF  
• This function is performed...

PJ1173ViewSonic33

INPUT Menu
INPUT Menu (continued)
ItemDescription
COMPONENT
Using the ▲/▼ buttons switches the function of the COMPONENT (Y, CB/PB, Cr/Pr) port.
COMPONENT ó SCART RGB
When the SCART RGB is selected, the COMPONENT (Y, CB/PB, Cr/Pr) and VIDEO ports will function as a SCART RGB port. A SCART adapter or SCART cable is required for a SCART RGB input to the projector. For details, contact ViewSonic.
VIDEO FORMAT
Set the video format for the s-video port and video port.
() Use the ◄/►...

PJ1173ViewSonic34

INPUT Menu
ItemDescription
FRAME LOCK
Set the frame lock function on/off for each port.
() Use the ▲/▼ buttons to select one of following ports.
RGB1 ó RGB2 ó HDMI
                QUIT
(2) Use the ◄/► buttons to turns the frame lock function on/off .
TURN ON ó TURN OFF
• This item can be performed only on a signal  with a vertical frequency of 50 to 60 Hz.
• When the TURN ON is selected, a moving pictures are displayed more smoothly.
• This function may cause a certain...

PJ1173ViewSonic35

INPUT Menu
INPUT Menu (continued)
ItemDescription
RESOLUTION
The resolution for the RGB1 and RGB2 input signals can be set on this projector.
(1) In the INPUT menu select the RESOLUTION using the ▲/▼ buttons and press the ► button.The RESOLUTION menu will be displayed.
(2)  In the RESOLUTION menu select the resolution you wish to display using the ▲/▼ buttons. Selecting AUTO will set a resolution appropriate to the input signal.
(3) Pressing the ► or ENTER button when selecting a...