ViewSonic Projector Pj1173 User Manual

PJ1173ViewSonic86

Configuring and controlling the projector via a web browser (continued)
Management with Web browser software
ItemDescription
Image
AspectSelects the aspect setting.
Over ScanAdjusts the over scan setting.
V PositionAdjusts the vertical position.
H PositionAdjusts the horizontal position.
H PhaseAdjusts the horizontal phase.
H SizeAdjusts the horizontal size.
Auto Adjust ExecutePerforms the automatic adjustment.
Input
ProgressiveSelects the progressive setting.
Video NRSelects the...

PJ1173ViewSonic87

Configuring and controlling the projector via a web browser (continued)
Management with Web browser software
ItemDescription
Audio
VolumeAdjusts the volume setting.
TrebleAdjust the Treble setting.
BassAdjusts the Bass setting.
SRS WOWSelects the SRS WOW setting.
SpeakerTurns the built-in speaker on/off.
Audio-RGB1Assigns the AUDIO-RGB1 input port.
Audio-RGB2Assigns the AUDIO-RGB2 input port.
Audio-HDMIAssigns the AUDIO-HDMI input port.
Audio-VideoAssigns the AUDIO-VIDEO input port....

PJ1173ViewSonic88

Configuring and controlling the projector via a web browser (continued)
Projector Status
Management with Web browser software
Displays and configures the current projector status.
ItemDescription
Error StatusDisplays the current error status
Lamp TimeDisplays the usage time for the current lamp.
Filter TimeDisplays the usage time for the current filter.
Power StatusDisplays the current power status.
Input StatusDisplays the current input signal source.
Blank On/OffDisplays the current...

PJ1173ViewSonic89

Configuring and controlling the projector via a web browser (continued)
Management with Web browser software
Network Restart
Restarts the projector’s network connection.
ItemDescription
RestartRestarts the projector’s network connection in order to activate new configuration settings.
• Restarting requires you to re-log on in order to further control or 
configure the projector via a web browser. Wait 1 minute or more after clicking 
[Restart] button to log on again.
• The Logon menu...

PJ1173ViewSonic90

Management with Web browser software
E-mail Alerts
The projector can automatically send an alert message to the specified e-mail 
addresses when the projector detects a certain condition that is requiri\
ng 
maintenance or detected an error.
• Up to five e-mail addresses can be specified.
• The projector may be not able to send e-mail if the projector suddenly loses 
power.
NOTE
Mail Settings
To use the projector’s e-mail alert function, please configure the following items 
through a...

PJ1173ViewSonic9

E-mail Alerts (continued)
Management with Web browser software
8) Click [Alert Settings] on the main menu to configure the E-mail Alerts settings. 
9)  Select and configure each alert item. Refer to the item 3.1.6 Alert Settings for 
further information.
10) Click [Apply] button to save the settings.
Failure/Warning e-mails are formatted as follows:
Subject line :   
Text : 
 Date   
 Time  
 IP Address  
 MAC Address   

PJ1173ViewSonic9

Management with Web browser software
Projector Management using SNMP
The SNMP (Simple Network Management Protocol) enables to manage the 
projector information, which is a failure or warning status, from the co\
mputer on 
the network. The SNMP management software will be required on the computer 
to use this function. 
• It is recommended that SNMP functions be carried out by a network 
administrator. 
• SNMP management software must be installed on the computer to monitor 
the...

PJ1173ViewSonic93

Management with Web browser software
Event Scheduling
The scheduling function enables to setup scheduled events including powe\
r on / 
power off. It enables to be “self-management” projector. 
• You can schedule the following control events: Power ON/OFF, Input 
Source and Transferred Image Display. 
• The power on / off event has the lowest priority among the all events that are 
defined at the same time. 
• There are 3 types of Scheduling, 1) daily 2) weekly 3) specific date.
• The...

PJ1173ViewSonic94

Management with Web browser software
• In Standby mode the power indicator will flash green for approx. 3 
seconds when at least 1 “Power ON” schedule is saved.
• When the schedule function is used, the power cord must be connecte\
d to 
the projector and the outlet and the power switch must be turned on, [ | ]. The 
schedule function does not work when the power switch is turned off, [O] or 
the breaker in a room is tripped. The power indicator will lights orange or green 
when the...

PJ1173ViewSonic95

Management with Web browser software
• A Network Restart is required after the Daylight Savings Time or 
SNTP configuration settings have been changed.
• The battery for the built in clock may be dead if the clock loses time even 
when the date and time have been set correctly. Replace the battery by 
following the instructions on replacing the battery. 
• The internal clock’s time may not remain accurate. Using SNTP is 
recommended to maintain accurate time.
NOTE
Date/Time Settings...