ViewSonic Projector Pj1158 User Manual

ItemDescription
SERVICE
KEY LOCKUsing  the  ▲/▼  buttons  turns  on/off  the  key  lock  feature.  When 
TURN	ON 	 s	selected, 	the 	buttons 	on 	the 	projector 	except 	the	
STANDBY/ON	button	are	locked. TURN	ON	
ó 	
TURN	OFF• 	Please	use	to	avod	a	mschef	and	touchng	accdentally.	 Ths	
functon	does	not	have	any	effect	on	the	remote	control.
REMOTE RECEIV.(1) Select a remote sensor using the ▲/▼ button.
1:FRONT 	
ó	2:TOP
	ó	3:REAR
(2)	Swtch	t	usng...

ItemDescription
SECURITYThs	projector	s	equpped	wth	securty	functons.
User	regstraton	s	requred	before	usng	the	securty	functons.
Please	contact	your	local	dealer.
1. Using Security Features
1.1 Inputting the PASSWORD
1.1-1  
Use the ▲/▼ buttons on the OPTION menu to select SECURITY and press the ► but-
ton.	 The	ENTER	PASSWORD	box	wll	be	
dsplayed.	 The	factory	default	PASSWORD	s	
5201.	Ths	PASSWORD	can	be	changed	(1.2...

ItemDescription
SECURITY
1.3 If you have forgotten your PASSWORD
1.3-1  Follow the procedure in 1.1-1 to display the ENTER PASSWORD BOX.
1.3-2   While the ENTER PASSWORD BOX is 
dsplayed,	press	and	hold	the	RESET 	button	
on	the	remote	control	for	about	3	seconds	or	
press and hold the INPUT and ► buttons on 
the	projector	for	about	3	seconds.
The	10	dgt	Inqurng	Code	wll	be	dsplayed.	
NOTE:	If	there	s	no	key	nput	for	about	55	seconds	
whle	the...

ItemDescription
SECURITY
2.2-4  Move the cursor to the right side of the CHECK PASSWORD BOX and press the ► 
button	to	dsplay	the	PASSWORD	for	about	
20	seconds,	please	make	note	of	the	PASS
-
WORD	durng	ths	tme.	
Pressng	the	ENTER	button	on	the	remote	con
-
trol	or	INPUT 	button	on	the	projector	wll	return	to	
MyScreen	PASS	WORD	on/off	menu.
When	a	PASSWORD	s	set	for	MyScreen:
•	The	MyScreen	regstraton	functon	(and	menu)	wll	be	unavalable.
•...

ItemDescription
SECURITY
3.1-3   Input a 4 part PIN Code using the ▲/▼/◄/►
/RGB	and	INPUT 	buttons.
A CONFIRMATION BOX will appear. Reenter the 
same	PIN	Code.	Ths	wll	complete	the	PIN	Code	
regstraton.
NOTE:	If	there	s	no	key	nput	for	about	55	seconds	
while the PIN BOX or the CONFIRMATION BOX are 
dsplayed	the	menu	wll	close.	If	necessary	repeat	
the process from 3.1-1.
Afterwards,	anytme	the	projector	s	restarted	after	
the power switch is turned off...

ItemDescription
SECURITY
4. Using the Transition Detector Function
Whle	the	Transton	Detector	functon	s	ON,	when	power	swtch	s	started 	to	
supply	to	the	projector,	t	mght	react	as	below.
•	 Transton	Detector	alarm	shown	below	mght	appear	on	screen,	f	the	pro
-jector has been moved or re-installed.
•	Transton	Detector	alarm	mght	appear	on	screen,	f	the	MIRROR	settng 	
has	been	changed.
•	Keystone	adjustment	feature...

ItemDescription
SECURITY
4.3 Setting the Transition Detector off
4.3-1  Follow the procedure in 4.1-1 to display the Transition Detector on/off menu.
4.3-2   Select TURN OFF to display the ENTER PASSWORD BOX (large). 
Enter	the	regstered	PASSWORD	and	the	screen	wll	return	to	the	
Transton	Detector	on/off	menu.
If	an	ncorrect	PASSWORD	s	nput	the	menu	wll	close.	If	necessary	repeat	
the process from 4.3-1.
4.4 If you have forgotten your PASSWORD
4.4-1   Follow the...

NETWORK	Menu
/07=4)$?5.%6
+2#&&45557$06/#5-
6+/&+((40%
&*%2674010
&(#7.6)#69#;
#0&6+/G5*16+0(14/#6+10548+%
+/#)2+%674
5672+0276
5%40126+10
#7&+1
06914-#5;/07
NETWORK Menu
ItemDescription
DHCP (Dynamic Host	Configura-tion Protocol) DHCP
	TURN	ON/TURN	OFF:
	Use the ▲/▼ buttons to turn DHCP on/off
TURN	ON	
ó 	
TURN	OFF
Select	 TURN	OFF	when	the	network	does	not	have		DHCP 	en
-abled.
IP ADDRESSEnterng	the	IP
	ADDRESS	:
	
Use	the	▲/▼/◄/► buttons to enter...

NETWORK Menu
ItemDescription
TIME DIFFER-ENCEEnterng	the	
TIME	DIFFERENCE	:
	
Use	the	▲/▼ 	buttons	to	enter	the	
TIME	DIFFERENCE.	
Set	the	same	 TIME	DIFFERENCE	
as	the	one	set	on	your	PC.	If	unsure,	
consult	your	network	admnstrator.	
Use the ◄ button to return to the menu 
after	settng	the	 TIME	DIFFERENCE.
DATE AND TIME Enterng	DATE	
AND	TIME	:
	
Use	the	▲/▼/◄/► buttons to enter the Year (last two digits), 
Month,	Date,	Hour	and	Mnute.
•	The	projector	wll...

ItemDescription
INFORMATIONINFORMATION	dsplay	:
	Use the ► or ENTER buttons to view net-work information and confirm settings.
•	Only the first 16 characters of the projector name are displayed.•	
The	battery	for	the	bult	n	clock	may	be	dead	f	the	clock	loses	
tme	even	when	the	DATE	 AND	TIME	have	been	set	correctly.	
Replace	the	battery	by	followng	the	nstructons	on	replacng	the	
battery.
SERVICE
Choose the RESTART using the ► button.
Then use the ▲ button...