ViewSonic Projector Pj1158 User Manual

Power on/off
Turning on the power
1.	Make sure that the power cord is firmly and cor-
rectly	connected	to	the	projector	and	the	outlet.
2.	Remove	the	lens	cover,	and	set	the	power	swtch	to	
the	ON	poston.		
The	power	ndcator	wll	lght	up	n	steady	orange.	 Then	
wat	several	seconds	because	the	buttons	may	not	func
-
ton	for	these	several	seconds.	
(1) When AUTO ON in OPTION menu is set to TURN ON	:The	lamp	wll	only	be	automatcally	turned	on	when...

Operating
Operatng
Adjusting the volume
1.	Press	the	VOLUME	button	on	the	remote	control.	
A	d alog 	w ll	appear 	on	 the	screen 	to	 ad 	you	n 	adjust ng	the 	volume.
2.	Use the cursor buttons ▲/▼ to adjust the volume.
To	close	the	dalog	and	complete	the	operaton,	press	the	
VOLUME	button	agan.	Even	f	you	do	not	do	anythng,	the	
dalog	wll	automatcally	dsappear	after	a	few	seconds.
● When no audio port is selected for current...

Operating
Searching an input signal
1.	Press	the	SEARCH	button	on	the	remote	control.
The	projector	wll	start	to	check	ts	nput	ports	n	order	to	
find any input signals.
When	an	nput	s	found,	the	projector	wll	stop	searchng	and	dsplay	the	mage.	
If	no	sgnal	s	found,	the	projector	wll	return	to	the	state	selected	before	the	
operaton.
RGB	1		RGB	2	 M1-D 	COMPONENT
	(Y,	CB/RB,	CR/BR)	 S-VIDEO 	VIDEO	
			
BLANKLASER
ASPECT
 ESC MENU...

Adjusting the zoom and focus
1.	Use	the	zoom	rng	to	adjust	the	screen	sze.		
2.	Use	the	focus	rng	to	focus	the	pcture.
Operating
Focus	rng
Zoom	rng
Adjusting the lens shift
1.	Use	the	vertcal	lens	shft	dal	to	shft	
the	pcture	upward	or	downward.	
	
2.	Use	the	horzontal	lens	shft	dal	to	
shft	the	pcture	left	or	rght.
Using the automatic adjustment feature
1.	Press	the	 AUTO	button	on	the	remote	control.		
	For an RGB...

Adjusting the position
1.	Press	the	POSITION	button	on	the	remote	control.	
The	“POSITION”	ndcaton	wll	appear	on	the	screen.
2.	Use the cursor buttons ▲/▼/◄/► to adjust the picture posi-
ton.
When	you	want	to	reset	the	operaton,	press	the	RESET 	button	on	the	remote	
control	durng	the	operaton.
To	complete	ths	operaton,	press	the	POSITION	button	agan.	Even	f	you	do	
not	do	anythng,	the	dalog	wll	automatcally	dsappear...

Operating
Using the magnify feature
1.	Press	the	ON	button	of	MAGNIFY	on	the	remote	control.			
The	“MAGNIFY”	ndcaton	wll	appear	on	the	screen	(al
-
though	the	ndcaton	wll	dsappear	n	several	seconds	wth	no	
operaton),	and	the	projector	wll	go	nto	the	MAGNIFY 	mode.
2.	Use the cursor buttons ▲/▼ to adjust the zoom level. 
To	move	the	zoom	area,	press	the	POSITION	button	n	the	MAGNIFY 	mode,	
then use the cursor buttons ▲/▼/◄/► to...

Operating
Temporarily blanking the screen
1.	Press	the	BLANK	button	on	the	remote	control.		
The	blank	screen	wll	be	dsplayed	nstead	of	the	screen	
of	nput	sgnal.	Please	refer	to	the	BLANK	tem	n	SCREEN	
menu.
To	ext	from	the	blank	screen	and	return	to	the	nput	sgnal	screen,	press	the		
BLANK	button	agan.	
● The projector automatically returns to the input signal screen when one of the  projector’s	buttons	or	the	remote	control	buttons	s	pressed...

Operating
Using the menu function
Ths	projector	has	the	followng	menus:	PICTURE,	IMAGE,	INPUT,	SETUP,	AUDIO,	
SCREEN,	OPTION,	NETWORK,	and	EASY 	MENU.	EASY	MENU	conssts	of	functons	
often used, and the other menus are classified into each purpose. Each of these menus is 
operated	usng	the	same	methods.	 The	basc	operatons	of	these	menus	are	as	follows.
1.	Press	the	MENU	button	on	the	remote	control	or	one	of	
the	cursor	buttons	on	the	projector.			
The	 Advanced	MENU,...

EASY Menu
EASY Menu
ItemDescription
ASPECTUsing the ◄/► buttons switches the mode for aspect ratio. See the ASPECT item in IMAGE menu.
AUTO KEY-
STONE EXECUTE
Using the ► button executes the auto keystone function. See the AUTO KEYSTONE  EXECUTE item in SETUP menu.
KEYSTONE Using the ◄/► buttons corrects the vertical keystone distortion.See the KEYSTONE  item in SETUP menu.
KEYSTONE Using the ◄/► buttons corrects the horizontal keystone distortion.See the KEYSTONE  item in SETUP menu.
 PICTURE MODE...

EASY Menu
ItemDescription
BRIGHTNESSUsing the ◄/► buttons adjusts the brightness.
See	the	BRIGHTNESS	tem	n	PICTURE	menu.
CONTRASTUsing the ◄/► buttons adjusts the contrast.
See	the	CONTRAST	tem	n	PICTURE	menu.
COLORUsing the ◄/► buttons adjusts the strength of whole color.
See	the	COLOR	tem	n	PICTURE	menu.
TINTUsing the ◄/► buttons adjusts the tint.
See	the	TINT	tem	n	PICTURE	menu.
SHARPNESSUsing the ◄/► buttons adjusts the sharpness.
See	the	SHARPNESS	tem...