ViewSonic Projector Pj1158 User Manual

Projector Control
Projector	Control
Projector Control
The	tems	shown	n	the	table	below	can	be	per-
formed	usng	the	
[Projector Control] 	menu.
Select	an	tem	usng	the	up	and	down	arrow	keys	
on	the	PC.
Most	of	the	tems	have	a	submenu.
Refer	to	the	table	below	for	detals.
Controls	the	projector.
ItemDescription
Main
Power Turns	the	power	On/Off.
Input SourceSelects	the	nput	source.
Picture ModeSelects	the	Pcture	Mode	settng.
Blank On/OffTurns	Blank...

Projector Control
Projector Control (Continued)
ItemDescription
Image
AspectSelects	the	Aspect	settng.
Over Scan Selects	the	Over	Scan	settng.
V PositionAdjusts	the	V	Poston.
H PositionAdjusts	the	H	Poston.
H PhaseAdjusts	the	H	Phase.
H SizeAdjusts	the	H	Sze.
Auto AdjustPerforms	Auto	Adjustment.
Input
Progressive Selects	the	progressve	settng.
Video NRSelects	the	Vdeo	NR	settng.
3D-YCSSelects the 3D-YCS setting.
Color Space Selects	the	Color	Space....

Option
VolumeAdjusts	the	Volume	settng.
TrebleAdjusts	the	Treble	settng.
Bass Adjusts	the	Bass	settng.
SRS WOWSelects	the	SRS	WOW	settng.
SpeakerTurns	Speaker	On/Off.
Audio-RGB1Assigns the Audio-RGB1 input terminal.
Audio-RGB2Assigns the Audio-RGB2 input terminal.
Audio-M1-DAssigns the Audio-M1-D input terminal.
Audio-VideoAssigns the Audio-Video input terminal.
Audio-S-VideoAssigns the Audio-S-Video input terminal.
Audio-ComponentAssigns the Audio-Component input terminal.
Auto...

Projector Control
Network Restart
Restarts	the	projector’s	network	connecton.
ItemDescription
RestartRestarts	the	projector’s	network	connecton	n	order	to	act-vate new configuration settings.
• Restarting requires you to re-log on in order to further control or con-
figure the projector via a web browser.
NOTE
Logoff
When	logoff	s	clcked,	the	logon	screen	s	dsplayed.
Projector Status
Displays and configures the current projector status.
ItemDescription
Error...

Failure & Warning Alerts via E-mail
Failure & Warning Alerts via E-mail
The projector can automatically send an alert to specified e-mail addresses when 
the	projector	requres	mantenance	or	has	encountered	an	error.
• Up to five e-mail addresses can be specified.
• The projector may be not able to send e-mail if the projector suddenly loses 
power.
NOTE
Mail Settings
To use the projector’s e-mail function please configure the following items via a 
web	browser.
Example: If the IP address of...

Failure & Warning Alerts via E-mail
 8)  Configure the Failure/Warning Alerts via E-mail settings. Click [Alert Settings]	
on	the	man	menu.
 9)   Select and configure each alert item. Refer to 
[Alert Settings] 	n	[Configuring	
and Controlling the Projector via a Web Browser] 	for	further	nformaton.
10)	Clck	the	
[Apply] 	button	to	save	the	settngs.
Failure/Warning e-mails are formatted as follows:
Subject	lne	 :		 
Text		 :	
		 Date	 
	 Tme	 
	 IP	Address	 
	 MAC...

Projector management via SNMP
Projector	management	va	SNMP
When	SNMP	s	enabled,	the	projector	s	able	to	send	Falure/Warnng	 Alerts	to	a	
specified PC.
•	It	s	recommended	that	SNMP	functons	be	carred	out	by	a	network	
admnstrator.	
•	SNMP 	management	software	must	be	nstalled	on	the	computer	to	montor	
the	projector	va	SNMP.NOTE
SNMP settings
Configure the following items via a web browser to use SNMP.
Example: If the IP address of the...

Controlling the Projector via Scheduling
Controllng	the	Projector	va	Schedulng
The	projector	can	be	automatcally	controlled	va	schedulng.
•	You	can	schedule	the	followng	control	events:	Power	ON/OFF,	Input	
Source	and	 Transferred	Image	Dsplay.	
• There are 3 types of Scheduling, 1) daily 2) day of the week 3) specific date.
• The priority for scheduled events is as follows 1) specific date 2) day of the 
week	3)	daly.
• Up to five specific dates are...

Controlling the Projector via Scheduling
Date/Time Settings
The	Date/Tme	settng	can	be	adjusted	va	a	web	browser.
Example: If the IP address of the projector is set to 192.168.1.10:
•	A 	Network	Restart	s	requred	after	the	Daylght	Savngs	 Tme	or	
SNTP configuration settings have been changed.
•	 The	battery	for	the	bult	n	clock	may	be	dead	f	the	clock	loses	tme	even	
when	the	DATE	and	 TIME	have	been	set	correctly.	Replace	the	battery	by	fol
-...

Controlling the Projector via Scheduling
Schedule Settings
Schedule settings can be configured from a web browser.
Example: If the IP address of the projector is set to 192.168.1.10:
There	are	three	types	of	schedulng.
 1) Daily: Perform the specified operation at a specified time every day.
 2)   Sunday ~ Saturday: Perform the specified operation at the specified time on a 
specified day of the week.
 3) Specific Date: Perform the specified operation on the specified date and time.
• In Standby...