ViewSonic Pjl6233 Projector User Manual


Chapter 4 Controlling the Projector
Control
Click Control on the main menu. The setting method differs depending 
on the contents of the page. Click on the page number to change pages 
and select desired setting items.

Please see the owner's manual of the projector to have the further information of 
each control item. 

The control page displays valid control items depending on the selected input mode, signal 
or  functions of the projector you use, therefore, there may be different controls...

ENGLISH

System
This function is to select the system of signal 
input to the projector. The available system 
mode are listed on the pull-down menu but-
ton according to the input signal. Select a 
system and then click Set button.
Control
If the mode (Mode1 to Mode10) which is stored in the item "PC Adjustment" ( p.38) is available, 
they are also listed together with the above mode.
Available selection at the RGB input
Item Description
XGA1........................ It automatically switches...


Chapter 4 Controlling the Projector
Sound 
This function is to adjust the sound of the 
projector.  The values in the text box repre-
sent the current control value or status.
Item Description
Volume...................
Adjusts the sound volume from the speaker. (0 ~ 31)Mute......................... Suppresses the sound. (ON, OFF) 

ENGLISH

Item Description
Contrast.............................. Adjusts picture con-
trast (0~ 63)
Brightness......................... Adjusts picture bright-
ness (0~ 63)
Color...................................... Adjusts picture color 
saturation (0~ 63)
Tint......................................... Adjusts picture hue 
(0~ 63)
Color temp........................
Sets a color temperature 
mode. (High, Mid, Low, 
XLow, User)
White balance
Red, Green, Blue..... Adjusts each white 
balance...


Chapter 4 Controlling the Projector
PC adjustment
Click PC Adj. on the main menu. This function is to adjust the signal from 
the computer connected to the projector to obtain the proper picture 
image on the screen. 
Item Description
Current mode......Displays a current mode like VGA, SVGA, XGA. SXGA, UXGA, WXGA, etc. or Mode1 - Mode10 
which are the customized mode created by using the "Mode Store" function described 
below.
Auto PC adj.......... Performs automatic adjustment.
Fine sync...

ENGLISH

Setting up the projector
Click Setting on the main menu. This function is to set up the projector. 
Select the sub menu [Screen setting] or [Setting] and then set up each set-
ting.
Setting up the projector
Item Description
Screen..................... Switches the screen mode. (Normal, True, Wide, Full, Custom) There may not be avail-
able mode depending on the input mode as shown in the table below.
Input sourceScreen modeVideo Computer
Normal
True *
Wide
Full *
Custom
The mark...


Chapter 4 Controlling the Projector
Item Description
Ceiling..................... Sets the image top/bottom and left/
right reversed. (ON, OFF)
Rear........................... Sets the image left/right reversed. (ON, 
OFF)
Terminal................. Sets the COMPUTER IN 2/MONITOR 
OUT terminal. (Computer2, Monitor 
out)
Power 
management..... Sets into the selected power manage-
ment mode (Ready, Shutdown, OFF) if 
the input signal is interrupted and no control key is pressed for the specified period...

ENGLISH

Setting up the projector
Item Description
Key lock.................. Sets the prohibition of controls either 
Projector or Remote control. (OFF, 
Projector keys, Remote control)
Fan control
.............Sets the fan control speed. 
OFF Normal mode
ON1 Highland mode 1
ON2 Highland mode 2
Lamp Corres.
Value(h).................. Displays the lamp use time 
(Corresponding value) . Reset the time 
after lamp replacement. Click "Reset", a 
confirmation display appears, and then 
click...


Chapter 4 Controlling the Projector
Information
This page is to display the basic information of the projector status. Click 
Information on the main menu.
Items Description
InputDisplays selected input and source.
SystemDisplays selected signal system.
SignalInput signal status (Yes, No)
ScreenDisplays screen mode.
Lamp status   Displays lamp status with an icon. Refer to the table as shown below.
SecurityDisplays the security (PIN code lock) status (Yes, No)PJ time(h)Displays the accumulated use...

ENGLISH

ENGLISH
ViewSonic 3-/3-/

Chapter 5
 Appendix 5
Connection examples
Use of telnet
Web browser setting
Q & A