ViewSonic Pjl6233 Projector User Manual

17
Setting up default setting
The monitoring information and e-mail information can be set up by the procedure below.
1Select System default setting from System menu. The setting window will appear.
2Switch by clicking Monitoring information or E-mail information tab for each setting.
Monitoring informationItems Description
Monitoring interval................Sets up the interval of the polling in minute unit. (1 to 99 minutes can be set)
Temperature unit
.....................Sets up the display...


Chapter 3 Basic Operation
E-mail informationItems Description
SMTP server.....................Sets up the IP address of SMTP mail server or server host name.
Administrator's
mail address
......................Sets up the e-mail address of administrator
Destination mail 
address................................Sets up the destination mail address when the event (ALERT, TRAP, SYSERR) happens 
on the target. The mail address entering window appears when clicking Add button.
E-mail information
If Send...


Customizing the status list
Changing the status column indication
1Select Column selection from System menu. The col-
umn selection window will appear.
2On the window, check the column name to be indi-
cated on the status list.
The mark [*] next to the column name indicates alert item.
3To change the order of the display column on the 
status list, select a column you intend to change the 
order and click To up or To down button.
4 Click OK to close setting.
When specifying the column width by...


Chapter 3 Basic Operation
Column Description
*Error info....................................Error information (Not available for the projector)
IP address....................................IP address of the network equipment
Community................................Community name of the network equipment (public)
Introduction date*
1...............Date of the network equipment installed
Timer...............................................Timer information
Product...

21
Changing font
Select Font setting from System menu. The font setup window will appear. Select your 
desired type face, style and size on the window.
Customized font property is applied to all the windows of the setting.
To change order or width of the column
Drag the status column name you want to change the order and move it on a new place 
and drop it. To change column width, set a mouse cursor onto the right edge of the col-
umn to change, drag the mouse on it and adjust the column width.
Sorting...

22
Chapter 3 Basic Operation
Viewing the alert information
1Clickbutton on the tool bar. The alert display window appears and the alert informa-
tion of all the targets which are having an alert is listed on this window as the below.
2To export the alert information as text file (CSV file), click Export button.
Column width can be changed with dragging the right edge of the column. The column order can 
be changed with drag and drop the column. Column can not be deleted. 


Viewing the event log
1Clickbutton on the tool bar. The event log display window appears and the events 
which have been happened on the targets  are listed on this window as the below.
2To export these events as text file (CSV file), click Export button.
3To delete the event log, select the accrual date item you intend to delete by clicking and 
then click Delete button. On the confirmation dialog, click Ye s to execute deletion.
Items Description
Accrual date......... Accrual date of the event...


Chapter 3 Basic Operation
Event Type Warning Column Warning ValueDescription
ALERTON : Abnormality has 
happened
OFF : Abnormality has been 
clearedConnectUn-connected
Connected
Acquisition error
* Refer to the 
next page Power status
PowerFailure
TemperatureError
Normal (AfterTempError)
RS232CFailure
Power management
Shutter management
LampFailure
Normal(Standby)
Normal(OnStartingUp)
Normal(OnCoolingDown)
Normal(PowerOn)
TemperatureError(OnCoolingDown)
Power management(OnCoolingDown)
Shutter...

25
The column order and width of the event log window are saved to the registry of the computer.
Up to 1000 of events can be stored. If it exceeds 1000 events, the oldest event is deleted and the 
latest event is added. The event log can be saved to the management file.
This Warning column is not available for some projector's model types.
Description of warning value 
The warning value with "*" in the above table shows the 
event when the alert has cleared, alert type is...


Chapter 3 Basic Operation
About event treatment
If the PJ Network Manager receives an event, it executes following event treatment items 
which are selected in the system default setting.
p Sound warning alarm
p Send e-mail
p Display warning dialog
For the further information of event, type, warning column and warning value, see the item 
"Viewing the event log" (p.23).
The setting of event treatment, refer to item "Setting up default setting" (p.17). From: Test1 (management...