ViewSonic Pjl6233 Projector User Manual


Chapter 5 Appendix
QWe use the DHCP/BOOTP server to assign the IP address. Is it possible to 
use the projector in this network environment?
A  Possible. This projector supports the DHCP/BOOTP server. To use this projector in 
this network environment, set it up so that the DHCP/BOOTP server does not assign 
the IP address configured to this projector for another device on the network. Please 
consult your network administrator ( pp.13, 24).
QHow can I install several projectors?
AInstall and...

ENGLISH
55
Q&A
Operation
QWhy can't be turned on/off  with web browser?
APlease make sure the settings of the projector are correct to use the projector. 
Please set the Standby mode of the projector's Setting menu to "Network". Refer to 
"4. Controlling the Projector"  "Power control and status check" ( pp.32 - 33).
QWhy can't I change the controls in the setting page with web browser?
APlease make sure the projector is turned on. If it is in the standby mode, the...


Chapter 5 Appendix
Others
QWhat are the rules for IP address assignment?
AIf the network is constructed with TCP/IP protocol, a unique IP address is required 
for each piece of network equipment. The following are basic rules of the assign-
ment.
Rule1
     Do not configure the same IP address to the net work equipment in the 
same network group. Each piece of equipment must be assigned a unique IP 
address.
     If the IP address is set [192.168. x. x], the Subnet Mask should be set 
[255. 255....

ENGLISH
57
Q&A
QCan I update the firmware of the projector.
AIt is possible to update the firmware through the network. It is required to have a 
special tool for the updating. For further information please consult your local dealer. 
The version number of the firmware is indicated on the lower part of the "Initial set-
ting" page.
Version of the 
firmware 

PJ Network Manager for Windows 

2
Contents .................................................................................. 2
Chapter 1 Introducing .......................................................... 3
Introducing ......................................................................................................................................................3
SNMP...


Introducing
This PJ Network Manager is a SNMP manager software for the network equipment which 
supports the private MIB (Management Information Base).
By installing the PJ Network Manager to the computer, you can monitor the equipment 
simply such as the projector, the projection monitor and the flat display monitor connect-
ed to the network.
* The PJ Network Manager can handle our products which has a SNMP agent function. 
SNMP
SNMP is an abbreviation for Simple Network Management Protocol.
On the...


Operating Environment
Limited condition
The number of agents monitored is up to 200.
Chapter 1 Introducing
Expression/Abbreviation
The OS of the computer and the Web browser described in this manual is Windows XP 
Professional and Internet Explorer 6.0. In case of another OS or Web browser, some instruc-
tion procedures may differ from the actual operation depending on your computer envi-
ronment.
Use of this manual
This manual does not provide the description of basic operation and functions for...

5
ViewSonicSNMP  Manager Software5
5
Chapter 2
 Set up2 


Chapter 2 Set up
PJ Network Manager installation
1Set the supplied CD-ROM into the CD-ROM 
drive of your computer. Double click 
SetupTool.
exe
 icon in the "PJ Network Manager" folder in 
the CD-ROM.
2Select "[English [United States]" from the pull-
down menu on the "Choose Setup Language" 
window and click OK button to start installing 
and then follow the installation wizards.
As the "Software License Agreement" will 
appear, read contents carefully and click Ye s...