Home > ViewSonic > Projector > ViewSonic Pjd5223 Projector User Manual

ViewSonic Pjd5223 Projector User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual ViewSonic Pjd5223 Projector User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 617 ViewSonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							EN-36
     36
    Dimensions
     284.0 mm (W) x 234.3 mm (D) x 81.5 mm (H)
    Ceiling mount installation
    234.3
    81.5284.0
    76.4
    50.9
    210.6 193.6
    139.0
    Ceiling mount screws:
    M4 x 8 (Max. L = 8 mm)
    Unit: mm 
    						
    							EN-37
     37
    Appendix
    LED Indicator Messages
    LED Type Color Status Meaning
    Power LED Blue Solid Standby mode when green mode is turned on.
    Temp/Lamp 
    LEDBlue/Red Off
    Power LED Blue Flash Standby mode when green mode is turned off.
    Temp/Lamp 
    LEDBlue/Red Off
    Power LED Blue Solid Powering up
    Temp/Lamp 
    LEDBlue/Red Off
    Power LED Blue Solid Normal operation
    Temp/Lamp 
    LEDBlue/Red Off
    Power LED Blue Flash Powering down
    (The projector needs to cool for 35 seconds after 
    the projector is turned off.) Temp/Lamp 
    LEDBlue/Red Off
    Power LED Blue Flash The projector system has some problems with its 
    fans, so the projector cannot start up.
    Temp/Lamp 
    LEDBlue/Red Flash
    Power LED Blue Solid The lamp has reached its end of life and must be 
    changed soon. The lamp will continue to operate 
    until it fails. Change the lamp. If the lamp is off, 
    then the ballast will become malfunction. Temp/Lamp 
    LEDLamp 
    (Red)Flash
    Power LED Blue Solid 1. Temperature is too high. The lamp will turn off. 
    The fan motor is cooling the lamp.
    Or
    2. The cooling process is not complete after the 
    peojector is shut down and re-started right away. Temp/Lamp 
    LEDTe m p  
    (Blue)Flash
    Power LED Blue Solid The lamp ignition failed. If temperature is too high, 
    the fans will cool the lamp. 
    Temp/Lamp 
    LEDBlue+
    RedFlash 
    						
    							EN-38
     38
    Compatibility Modes
    Computer: 
    Resolution H-Sync [KHz] V-Sync [Hz]
    640 x 350 37.9 85.0
    640 x 480 24.6 50.0
    31.5 59.9
    37.9 72.8
    37.5 75.0
    43.3 85.0
    61.9 120.0
    720 x 400 31.5 70.0
    37.9 85.0
    800 x 600 31.0 50.0
    35.2 56.0
    37.9 60.3
    48.1 72.0
    46.9 75.0
    53.7 85.1
    76.3 120.0
    1024 x 768 48.4 60.0
    56.5 70.1
    60.0 75.0
    68.7 85.0
    97.6 120.0
    1152 x 864 67.5 75.0
    1280 x 768 47.8 60.0
    1280 x 800 49.7 60.0
    1280 x 960 60.0 60.0
    85.9 85.0
    1280 x 1024 64.0 60.0
    1400 x 1050 65.3 60.0
    1600 x 1200 75.0 60.0
    1680 x 1050 65.3 60.0 
    						
    							EN-39
     39
    Video: 
    Compatibility Resolution H-Sync [KHz] V-Sync [Hz]
    480i 720 x 480 15.8 60
    480p 720 x 480 31.5 60
    576i 720 x 576 15.6 50
    576p 720 x 576 31.3 50
    720p 1280 x 720 37.5 50
    720p 1280 x 720 45 60
    1080i 1920 x 1080 33.8 60
    1080i 1920 x 1080 28.1 50
    1080p 1920 x 1080 67.5 60
    1080p 1920 x 1080 56.3 50 
    						
    							EN-40
     40
    Troubleshooting
    Refer to the symptoms and measures listed below before sending the projector for 
    repairs. If the problem persists, contact your local reseller or service center. Please 
    refer to LED Indicator Messages as well.
    Start-up problems
    If no lights turn on:
    Be sure that the power cord is securely connected to the projector and the other endis plugged into an outlet with power.
    Press the power button again.
    Unplug the power cord and wait for a short while, then plug it in and press the powerbutton again.
    Image problems
    If the searching source is displayed:
    Press SOURCE on the projector or Source on the remote control to select an
    active input source.
    Be sure the external source is turned on and connected.
    For a computer connection, ensure your notebook computer’s external video port isturned on. Refer to the computer manual.
    If the image is out of focus:
    While displaying the on-screen menu, adjust the focus ring. (The image size shouldnot change; if it does, you are adjusting the zoom, not the focus.)
    Check the projection lens to see if it needs cleaning.
    If the image is flickering or unstable for a computer connection:
    Press MENU on the projector or Menu on the remote control, go to Video/Audio
    and adjust Frequency or Tracking.
    Remote control problemsIf the remote control does not operate:
    Be sure nothing is blocking the remote control receiver on the front of the
    projector. Use the remote control within the effective range.
    Aim the remote control at the screen or at the front of the projector.
    Move the remote control so it is more directly in front of the projector and not as far
    to the side. 
    						
    							EN-41
     41
    RS-232 Command and Configuration
    Function Action Control Code Return 
    Code
    Power Power on BE,EF,10,05,00,C6,FF,11,11,01,00,01,00 6
    Power off BE,EF,03,06,00,DC,DB,69,00,00,00,00,00 6
    Source input Computer1 BE,EF,03,19,00,19,29,01,47,02,CC,CC,00 6
    Computer2 BE,EF,03,19,1E,90,72,01,47,02,CC,CC,00 6
    S-Video BE,EF,03,19,00,E8,69,01,47,02,CC,CC,00 6
    Video BE,EF,03,19,00,78,A8,01,47,02,CC,CC,00 6
    Projector 
    positionFront table BE,EF,10,07,9F,9D,0E,0A,EF,00,00,00,00 6
    Rear table BE,EF,10,07,9F,9D,0E,0A,EF,01,00,00,01 6
    Front ceiling BE,EF,10,07,9F,9D,0E,0A,EF,02,00,00,02 6
    Rear ceiling BE,EF,10,07,9F,9D,0E,0A,EF,03,00,00,03 6
    OSD Menu BE,EF,02,06,00,E9,D3,30,00,00,00,00,00 6
    Up BE,EF,02,06,00,6D,D2,34,00,00,00,00,00 6
    Down BE,EF,02,06,00,0B,D2,32,00,00,00,00,00 6
    Left BE,EF,02,06,00,DA,D3,33,00,00,00,00,00 6
    Right BE,EF,02,06,00,38,D2,31,00,00,00,00,00 6
    Lamp ECO on BE,EF,03,06,00,EF,DB,6A,00,00,00,00,00 6
    ECO off BE,EF,03,06,00,3E,DA,6B,00,00,00,00,00 6
    Using hours BE,EF,03,06,00,BA,DB,6F,00,00,00,00,00 xxxx
    Fan High Attitude on BE,EF,02,06,00,40,D3,80,00,00,00,00,01 6
    High Attitude off BE,EF,02,06,00,40,D3,80,00,00,00,00,00 6
    Keystone Keystone up BE,EF,03,06,00,10,DB,65,00,00,00,00,00 6
    Keystone down BE,EF,03,06,00,23,DB,66,00,00,00,00,00 6
    Aspect ratio 4:3 BE,EF,03,06,00,0D,DA,68,00,01,00,00,01 6
    16:9 BE,EF,03,06,00,0D,DA,68,00,02,00,00,02 6
    Blank Blank on BE,EF,02,06,00,DF,DF,66,00,01,00,00,01 6
    Blank off BE,EF,02,06,00,DF,DF,66,00,02,00,00,02 6
    Freeze Freeze on BE,EF,02,06,00,02,D0,2B,00,01,00,00,01 6
    Freeze off BE,EF,02,06,00,02,D0,2B,00,02,00,00,02 6
    Volume Volume + BE,EF,02,06,00,F1,DE,68,00,00,00,00,00 6
    Volume - BE,EF,02,06,00,20,DF,69,00,00,00,00,00 6
    Mute on BE,EF,02,06,00,0E,DE,67,00,01,00,00,01 6
    Mute off BE,EF,02,06,00,0E,DE,67,00,02,00,00,02 6
    Auto source Auto source on BE,EF,03,06,00,89,DB,6C,00,00,00,00,00 6
    Auto source off BE,EF,03,06,00,58,DA,6D,00,00,00,00,00 6
    Auto Sync BE,EF,03,06,00,58,DA,6D,00,00,00,00,00 6
    Factory 
    defaultBE,EF,03,06,00,6B,DA,6E,00,00,00,00,00 6 
    						
    							EN-42
     42
    Firmware 
    versionBE,EF,03,06,00,D5,D9,70,00,00,00,00,00 PXX37-9....
    System 
    StatusBE,EF,03,06,00,04,D8,71,00,00,00,00,00 03=Power
    On 00=Off
    3D Sync 3D Sync on BE,EF,02,06,00,54,EF,7C,00,01,00,00,01 6
    3D Sync off BE,EF,02,06,00,54,EF,7C,00,00,00,00,00 6
    Color mode Brightest BE,EF,03,06,00,38,5A,88,12,08,08,12,08 6
    PC BE,EF,03,06,00,38,5A,88,10,00,00,10,00 6
    Movie BE,EF,03,06,00,38,5A,88,13,01,01,13,01 6
    ViewMatch BE,EF,03,06,00,38,5A,88,14,02,02,14,02 6
    White Board BE,EF,03,06,00,38,5A,88,15,05,05,15,05 6
    Black Board BE,EF,03,06,00,38,5A,88,16,06,06,16,06 6
    Green Board BE,EF,03,06,00,38,5A,88,17,07,07,17,07 6
    User 1 BE,EF,03,06,00,38,5A,88,18,03,03,18,03 6
    User 2 BE,EF,03,06,00,38,5A,88,19,04,04,19,04 6
    Language English BE,EF,1A,0C,00,09,0B,3A,00,01,00,00,01 6
    Nederlands BE,EF,1A,0C,00,09,0B,3A,00,02,00,00,02 6
    Français BE,EF,1A,0C,00,09,0B,3A,00,03,00,00,03 6
    Español BE,EF,1A,0C,00,09,0B,3A,00,04,00,00,04 6
    Italiano BE,EF,1A,0C,00,09,0B,3A,00,05,00,00,05 6
    한국어BE,EF,1A,0C,00,09,0B,3A,00,06,00,00,06 6
    ไทยBE,EF,1A,0C,00,09,0B,3A,00,07,00,00,07 6
    Português BE,EF,1A,0C,00,09,0B,3A,00,08,00,00,08 6
    繁體中文BE,EF,1A,0C,00,09,0B,3A,00,09,00,00,09 6
    简体中文BE,EF,1A,0C,00,09,0B,3A,00,0A,00,00,0A 6
    日本語BE,EF,1A,0C,00,09,0B,3A,00,0B,00,00,0B 6
    РусскийBE,EF,1A,0C,00,09,0B,3A,00,0C,00,00,0C 6
    Deutsch BE,EF,1A,0C,00,09,0B,3A,00,0D,00,00,0D 6
    Svenska BE,EF,1A,0C,00,09,0B,3A,00,0E,00,00,0E 6
    Türkçe BE,EF,1A,0C,00,09,0B,3A,00,0F,00,00,0F 6
    Suomi BE,EF,1A,0C,00,09,0B,3A,00,10,00,00,10 6
    Polski BE,EF,1A,0C,00,09,0B,3A,00,11,00,00,11 6
    Magnify Magnify Inc BE,EF,02,06,00,22,55,76,00,00,00,00,01 6
    Magnify Dec BE,EF,02,06,00,22,55,76,00,00,00,00,00 6
    Green Mode Green Mode On BE,EF,02,06,00,40,B5,86,00,00,00,00,01 6
    Green Mode Off BE,EF,02,06,00,40,B5,86,00,00,00,00,00 6
    DCR DCR On BE,EF,02,06,00,D3,D1,2A,00,00,00,00,00 6
    DCR Off BE,EF,03,06,00,EE,DA,6B,00,00,00,00,00 6 
    						
    							EN-43
     43
                     
     D-Sub 9 pin
    11 CD
    2RXD
    3TXD
    4DTR
    5GND
    6DSR
    7RTS
    8CTS
    9RI           Wire List
    C1 COLOR C2
    1Black 1
    2Brown 2
    3Red 3
    4 Orange 4
    5 Yellow 5
    6Green 6
    7Blue 7
    8 Purple 8
    9White 9
    SHELL DW SHELL 
    						
    							EN-44
     44
    IR Control Code
    System Code: 83F4
    Format : NEC
     
    87 0264
    65
    6667
    84
    6B8D
    82
    85 8C
    81 83
    0A
    03
    630F
    80
    8F68
    6A
    8E88
    89
    8B 
    						
    							45
    Customer Support
    For technical support or product service, see the table below or contact\
     your reseller.
    Note : You will need the product serial number.
    Country/RegionWebsiteT = TelephoneF = FAXEmail
    Australia/New Zealandwww.viewsonic.com.auAUS= 1800 880 818NZ= 0800 008 [email protected]
    Canadawww.viewsonic.com
    T (Toll-Free)= 1-866-463-4775T (Toll)= 1-424-233-2533F= 1-909-468-3757
    [email protected]
    Europewww.viewsoniceurope.comwww.viewsoniceurope.com/uk/Support/Calldesk.htm
    Hong Kongwww.hk.viewsonic.comT= 852 3102 [email protected]= 1800 11 [email protected]
    Ireland (Eire)www.viewsoniceurope.com/uk/www.viewsoniceurope.com/uk/support/call-desk/[email protected]= 080 333 [email protected] America(Argentina)www.viewsonic.com/la/T= [email protected]
    Latin America (Chile)www.viewsonic.com/la/T= [email protected] America(Columbia)www.viewsonic.com/la/T= [email protected]
    Latin America (Mexico)www.viewsonic.com/la/T= [email protected] y Datos, 29 SUR 721, COL. LA PAZ, 72160 PUEBLA, PUE. Tel: 01.222.8\
    91.55.77 CON 10 LINEASElectroser, Av Reforma No. 403Gx39 y 41, 97000 Mérida, Yucatán. Tel: 01.999.925.19.16Other places please refer to http://www.viewsonic.com/la/soporte/index.htm#MexicoLatin America (Peru)www.viewsonic.com/la/T= [email protected]= 853 2870 [email protected] Eastap.viewsonic.com/me/Contact your [email protected]
    Puerto Rico & Virgin Islandswww.viewsonic.com
    T= 1-800-688-6688 (English)T= 1-866-379-1304 (Spanish)F= 1-909-468-3757
    [email protected]@viewsonic.com
    Singapore/Malaysia/Thailandwww.ap.viewsonic.comT= 65 6461 [email protected]
    South Africaap.viewsonic.com/za/Contact your [email protected]
    United Kingdomwww.viewsoniceurope.com/uk/www.viewsoniceurope.com/uk/support/call-desk/[email protected]
    United Stateswww.viewsonic.com
    T (Toll-Free)= 1-800-688-6688T (Toll)= 1-424-233-2530F= 1-909-468-3757
    [email protected]  
    						
    All ViewSonic manuals Comments (0)

    Related Manuals for ViewSonic Pjd5223 Projector User Manual