ViewSonic Pjd5223 Projector User Manual

							EN-6
 6
Package Contents
When you unpack the projector, make sure you have all these components:
Projector AC Power Cord Remote Control (IR) & batteries 
(AAA *2 PCS)
VGA Cable (D-SUB to D-
SUB)ViewSonic CD Wizard Quick Start Guide
Contact you dealer immediately if any items are missing, appear damaged, or if
the unit does not work.Save the original shipping carton and Packing material; they will come-in 
handy if you ever to ship your unit. for maximum protection, repack your unit as 
it was originally packed at the factory. 
						

							EN-7
 7
Projector Overview
Front View
Front IR remote control sensor Control panel
Elevator foot Zoom ring
Projection lens Focus ring
Speaker Lamp cover
Ventilation holes
32154
6789
16
27
38
49
5 
						

							EN-8
 8
Rear View 
Connection ports
AC power socket
Kensington lock
Bottom View
Security bar 
Ceiling mount holes
Ventilation holes
132
1
2
23
1
2
3
3
1
22
3
This projector can be used with a ceiling mount for support. The ceiling mount is
not included in the package.
Contact your dealer for information to mount the projector on a ceiling. 
						

							EN-9
 9
Using the Product
Control Panel
Power
Turn the projector on or off.
SOURCE
Display the source selection bar.
MENU/EXIT
Display or exit the on-screen display menus.
Keystone/Arrow keys ( /Up,  /Down)
Manually correct distorted images resulting from an angled projection.
Four directional buttons
Use four directional buttons to select items or make adjustments to your  
selection.
MODE
Change the color mode setting by sequence.
POWER (Power LED indicator)
Refer to “LED Indicator Messages”.
TEMP/LAMP (Temp/Lamp LED indicator)
Refer to “LED Indicator Messages”.
TEMP/LAMPPOWERMODESOURCEMENU/
EXIT
142
4
65
78
3
1
2
3
4
5
6
7
8 
						

							EN-10
 10
Connection Ports
AUDIO IN
Connect an audio output from video equipment or computer to this jack.
S-VIDEO
Connect S-Video output from video equipment to this jack.
COMPUTER IN 1
Connect image input signal (analog RGB or component) to this jack.
RS-232
When operating the projector via a computer, connect this to the controlling 
computers RS-232C port.
MINI USB
This connector is for firmware update and mouse function support.
COMPUTER OUT
Connect to a computer display, etc.
COMPUTER IN 2
Connect image input signal (analog RGB or component) to this jack.
VIDEO
Connect composite video output from video equipment to this jack.
AUDIO OUT
Connect to a speaker or other audio input equipment.
69
12345
78
1
2
3
4
5
6
7
8
9 
						

							EN-11
 11
Remote Control
Power
Turn the projector on or off.
VGA1
Display COMPUTER IN 1 signal.
Menu/ Left mouse
Display on-screen display menus.
Perform the left button of the 
mouse when mouse mode is 
activated.
Mouse
/Right mouse
Switch between the normal and 
mouse modes.
Perform the right button of the 
mouse when mouse mode is 
activated.
Keystone/Arrow keys ( /Up, 
/Down)
Manually correct distorted images 
resulting from an angled 
projection.
Left
When the On-Screen Display 
(OSD) menu is activated, the #5, 
#6, and #19 keys are used as 
directional arrows to select the 
desired menu items and to make 
adjustments.
Timer
Activate P-Timer OSD menu.
My Button
User definable key for customized 
function.
Pattern
Display embedded test pattern.
Freeze
Freeze the projected image.Color Mode
Select the picture setup mode.
Blank
Hide the screen picture.
Source
Display the source selection bar.
Auto
Automatically determines the best 
picture timings for the displayed image.
1
2
3
4
5
6
7
8
9
10
4
6
5
7
9
11
15
16
18
19
20
21
22
2312
10
173
5
8
13
14
11
12
13
14 
						

							EN-12
 12
Video/Page Up
Switch input source to Composite/
S-Video by sequence.
Perform page up function when 
mouse mode is activated.
VGA2
Display COMPUTER IN 2 signal.
ESC/Page Down
Goes back to previous OSD menu.
Perform page down function when 
mouse mode is activated.
Enter
Confirmed selections.
Right/ Lock
Activate panel key lock.
Magnify
Magnifies or reduces the projected 
picture size.
Vo l u m e
Adjust the volume level.
Mute
Cut off the sound temporarily.
Aspect
Select the display aspect ratio.Using the remote mouse control
The capability of operating your computer 
with the remote control gives you more 
flexibility when delivering presentations.
1. Connect the projector to your PC or 
notebook with a USB cable prior to 
using the remote control in place of 
your computer’s mouse. See 
“Connecting a computer” on page 16 
for details.
2. Set the input signal to 
COMPUTER IN 
1 or  COMPUTER IN 2.
3. Press Mouse on the remote control to 
switch from the normal mode to the 
mouse mode. An icon appears on the 
screen to indicate the activation of the 
mouse mode.
4. Perform the desired mouse controls on 
your remote control.
To move the cursor on the screen, 
press /  /  /  .
To left-click, press  .
To right-click, press  .
To drag-and-drop, press and hold 
Enter, press  /  /  /  to 
drag. When it is where you want it, 
press Enter again.
To operate your display software 
program (on a connected PC) 
which responds to page up/down 
commands (like Microsoft 
PowerPoint), press Page Up/Page 
Down.
To return to the normal mode, 
press Mouse again or other keys 
except for the mouse related multi-
function keys.
15
16
17
18
19
20
21
22
23 
						

							EN-13
 13
Installing the Batteries
1. Open the battery cover in the 
direction shown.
2. Install batteries as indicated by the 
diagram inside the compartment.
3. Close the battery cover into 
position.
Caution
 Risk of explosion if battery is replaced by an incorrect type.
 Dispose of used batteries according to the instructions.
 
Make sure the plus and minus terminals are correctly aligned when loading a battery.
Keep the batteries out of the reach of children. There is a danger of death by 
accidentally swallowing the batteries.
Remove batteries from remote control when not using for extended periods.Do not dispose of the used batteries along with household waste. Dispose of used 
batteries according to local regulations.
Danger of explosion may happen if batteries are incorrectly replaced. Replce all 
the batteries with new ones.
Batteries should not be in or near to fire or water, keep batteries in a dark, cool 
and dry place.
If suspect battery leakage, wipe out the leakage and then replace new batteries.  
If the leakage adheres to your body or clothes, rinse well with water immediately. 
						

							EN-14
 14
Remote Control Operation
Point the remote control at the infrared remote sensor and press a button.
Operating the projector from
the front
7m5m15
158m
The remote control may not operate when there is sunlight or other strong
light such as a fluorescent lamp shining on the remote sensor.
Operate the remote control from a position where the remote sensor is visible.Do not drop the remote control or jolt it.Keep the remote control out of locations with excessively high temperature or
humidity.
Do not get water on the remote control or place wet objects on it.Do not disassemble the remote control. 
						

							EN-15
 15
Connection
When connecting a signal source to the projector, be sure to:
1. Turn all equipment off before making any connections.
2. Use the correct signal cables for each source.
3. Ensure the cables are firmly inserted.
ImportantIn the connections shown above, some cables may not be included with the 
projector (see “Package Contents” on page 6). They are commercially 
available from electronics stores.
The connection illustrations above are for reference only. The rear 
connecting jacks available on the projector vary with each projector model.
For detailed connection methods, see pages 16-19. Audio cable VGA cable (D-Sub to D-Sub)
Composite Video cable USB cable
S-Video cable VGA to DVI-A cable
VGA (D-Sub) to HDTV (RCA) cable
234
15657
11
15
26
37
4