Vidikron Projector Vision Model 70 User Manual

Vidikron Vision 70 Series Owner’s Operating Manual 69 
PREL
IMINARY
7.1 
Vision 70 Specifications
Table 7-1 lists the Vision 70 specifications.  
7Specifications
Table 7-1. Vision 70 Specifications 
Projector Type:Digital Light Processing (DLP), Single-Chip DMD
Native Resolution:1920 x 1080 (16:9)
Aspect Ratios:4:3, Letterbox, 16:9 Anamorphic, IntelliWide, Cinema, Cinema Fill
Video Standards:NTSC, PAL, SECAM
DTV Compatibility:480p, 576p, 720p, 1080i, 1080p
Scan Frequency:Horizontal: 15 - 80 kHz...

Specifications
70 Vidikron Vision 70 Series Owner’s Operating Manual
PREL
IMINARY
Brightness and Contrast: Cinema Standards Measurement System (CSMS) 
Specifications
- Brightness*: 14.7 to 21.5 foot-Lamberts (fL)
- Contrast Ratio*: 195:1 to 218:1
*Variable depending on Aperture Control setting
These measurements are taken from the projector in a controlled, home 
theater environment. All measurements are made to ANSI/NAPM 
IT7.228-1997 specifications using the Photo Research PR-650 
SpectraColorimeter...

Specifications
Vidikron Vision 70 Series Owner’s Operating Manual 71 
PREL
IMINARY
Regulatory Approvals:Complies with FCC, CE C-Tick
Limited Warranty: Projector: Two (2) years parts and labor from the date of delivery 
to the end user.
Lamp: 1000 hours or six (6) months, whichever comes first. 
Specifications are subject to change without notice. 
Table 7-1. Vision 70 Specifications (continued) 

Specifications
72 Vidikron Vision 70 Series Owner’s Operating Manual
PREL
IMINARY
7.2 
Vision 70 Dimensions
Figure 7-1 shows the Vision 70 dimensions. 
Figure 7-1. Vision 70 Dimensions
14.9 in. (379.68  mm)
4.1 in.
(103.89  mm)
17.3 in. (440.00  mm)
13.0 in. 
(330.00  mm)
11.0 in. 
(280.25  mm)
22.0 in. 
(560.51  mm)
4.4 in. 
(110.80  mm)
8.0 in. 
(203.00  mm)
8.8 in. 
(222.50  mm)
18.9 in. 
(480.00  mm)
6.9 in. 
(175.00  mm) 

Vidikron Vision 70 Series Owner’s Operating Manual A-1 
PREL
IMINARY
This Appendix describes how to personalize the ISF splash screen on the Vidikron Vision 70 
Series DLP Projectors. 
1. Connect a PC to the Vision 70 RS-232 port and establish a serial connection; refer to 
RS-232 Connection and Port Configuration on page 65 if you need instructions. 
2. Press MENU on the projector remote control. Use the up- or down-arrow keys to 
highlight ISF Calibration and press ENTER. Use the number buttons on the...

Personalizing the ISF Splash Screen on the Vision 70
A-2 Vidikron Vision 70 Series Owner’s Operating Manual
PREL
IMINARY
9. Power-cycle the projector to see the change:
 
CALIBRATED FOR:
John Doe     By: Tinh Ho
CUSTOM BUILT BY: 

Vidikron
2900 Faber Street
Union City, CA 94587
510-324-5900
Fax 510-324-5905
1-888-4-VIDIKRON
www.vidikron.com
SERIAL NUMBER
RUMA-011225
rev. 12-15-06 v1.0