Vidikron Projector Vision Model 110 User Manual
Here you can view all the pages of manual Vidikron Projector Vision Model 110 User Manual. The Vidikron manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 31
Installation Vidikron Vision Model 110 Owner’s Operating Manual 19 PREL IMINARY Table 3-4 lists the lens shift limits for each available Vision 110 lens, as percentages and absolute measurements with a 100 x 56 inch (1.78:1) screen. Folded OpticsIn rear screen applications where space behind the projector is limited, a mirror may be used to fold the optical path, as shown in Figure 3-5. The position of the projector and mirror must be accurately set. If you are considering this type of...
Page 32
Installation 20 Vidikron Vision Model 110 Owner’s Operating Manual PREL IMINARY Other ConsiderationsOther considerations and tips that can help improve your installation: Keep the ambient temperature constant and below 35°C (95°F). Keep the projector away from heating and/or air conditioning vents. Changes in temperature may cause drifts in the projector circuitry, which may affect performance. Keep the projector away from devices that radiate electromagnetic energy such as motors and transformers....
Page 33
Installation Vidikron Vision Model 110 Owner’s Operating Manual 21 PREL IMINARY 3. Remove the Lens Cavity Front Cover. 4. Remove the Rear Lens Cap. 5. Hold the lens assembly with the motor facing the right side of the Lens Cavity. Carefully insert the back of the lens assembly into the hole in the lens flange. Gently push the lens assembly in until it is seated flush against the flange and the motor connectors have seated. Make...
Page 34
Installation 22 Vidikron Vision Model 110 Owner’s Operating Manual PREL IMINARY 6. Lock the lens in place by turning the Lens Locking Nut (to the left of the lens) 180 degrees counter-clockwise. (Use a 6.0mm hex wrench.) 7. Remove the Front Lens Cap. 8.Replace the Lens Cavity Front Cover. 9. Re-install the Projector Front Jewelry. Tighten the hex screws at the top and bottom of the jewelry to secure it. 3.5 Installing the Optional...
Page 35
Installation Vidikron Vision Model 110 Owner’s Operating Manual 23 PREL IMINARY Installing the AutoScope Lens Motor (Vision 110/CineWide with AutoScope) Figure 3-6 shows the Vision 110/CineWide with AutoScope motor assembly. Figure 3-6. Vision 110/CineWide with AutoScope Motor Assembly - Exploded View 1. Do not install the CineWide lens yet, only the fixed CineWide base plate or AutoScope lens motor. You will install the CineWide lens after you install the projector and adjust the primary lens. 2....
Page 36
Installation 24 Vidikron Vision Model 110 Owner’s Operating Manual PREL IMINARY Remove Projector Front Feet: Place the projector upside down on a blanket or other soft surface. Loosen and remove the two front feet on the projector. Install Ceiling Mount Adapters/Projector Stands: For ceiling installations, the adapters bring the attachment points for the projector mounting rails (included with the projector ceiling mount kit) from the bottom of the projector up and around the...
Page 37
Installation Vidikron Vision Model 110 Owner’s Operating Manual 25 PREL IMINARY Figure 3-7. Vision 110 with Ceiling Mount Adapters/Projector Stands DO NOT OVER-TIGHTEN THE SCREWS. Caution
Page 38
Installation 26 Vidikron Vision Model 110 Owner’s Operating Manual PREL IMINARY Install Lens Motor: Position the AutoScope Lens Motor (item #1) as shown in Figure 3-8. Line up the mounting holes on the lens motor housing with those on the underside of the projector. Secure the motor to the projector with the eight (8) remaining M6 x 12mm Pan-Head Phillips screws (item #2). Figure 3-8. AutoScope Lens Motor Installation After you have installed the AutoScope lens motor, proceed with Mounting the...
Page 39
Installation Vidikron Vision Model 110 Owner’s Operating Manual 27 PREL IMINARY Installing the Fixed CineWide Base Plate (Vision 110/CineWide) To install the fixed CineWide base plate on a Vision 110/CineWide: 1. Place the projector upside down on a blanket or other soft surface. 2. Line up the mounting holes on the lens mount base plate with those on the bottom of the projector, directly below the primary lens (see Figure 3-9). 3. Secure the base plate to the projector with the screws provided...
Page 40
Installation 28 Vidikron Vision Model 110 Owner’s Operating Manual PREL IMINARY 3.6 Mounting the Vision 110 There are several methods for mounting the projector. Depending on your chosen installation, one method may be more suitable than another. Floor Mounting (Upright)In typical front and rear screen installations, the projector can be mounted to a secure and level surface such as a table or cart. Carts are useful when moving a projector during a presentation or from site to site. If possible,...