Trillium Panther 2064 Technical Service Manual

							Feature 
Programming . Technical 
Service 
Manual 
Sets (program code 3YY, preprogrammed for Panther 2064) 
-reflects the type of Set connected to each line. 
Simultaneous/Serial Ringing (program code 009, pre- 
programmed for serial ringing) - determines whether a 
station will hear only one incoming ring (serial) or will hear 
the CO/PBX ringing cadence (simultaneous). 
SMDR Printout (program code 002, preprogrammed for 
outgoing toll calls) - selects the type of call records cap- 
tured by the printer or other recording device. 
NOTE 
When choosing a value for the Start Data 
Recording parameter, consider the time it 
typically takes to dial and answer a call. 
Start Data Recording (program code 007, ‘prepro- 
grammed for 5 seconds) - sets the length of time before the 
Station Message Detail Recorder (SMDR) starts to record 
Information. 
Telephone or PBX, Line (program. code 101, prepro- 
. grammed for telephene line) - tells the.KSU, which lines 
are central office (CO) lines and which arc PBX/CENTREX 
lines. 
Tenant Group By Station (program code 4YY, prepro- 
grammed for no assignment) - assigns the line groups 
defined under Line Grouping to be assigned to the indicat- 
ed station (see also Line Group Type). Toll Restrictions (program code 3YY, preprogrammed 
for Class A) - assigns stations to one of three call restric- 
tion classes: 
Class A = no restrictions 
Class B = prevented from dialing 0 or 1 as the first 
digit, from dialing the number of digits to deny (see 
Digits-to-Deny), or from dialing any of the specific 
restriction entries (see Call Restrictions) 
Class C = no outside calls can be placed (but intercom 
calls can be placed or received, and incoming outside 
calls can be received, depending on line group 
programming). 
Tone Duration (program code 001, preprogrammed for 
100 milliseconds) - sets the length of each tone digit dialed 
(see also Tone or Pulse). 
Tone or Pulse (program code 100, preprogrammed for 
tone) - sets a tone or a pulse for each CO Line. 
Transfer Ringing (program code 009, preprogrammed for 
3 times) - determines how many times a a~transferred call 
will ring before.being’ietumed to me’mastei set or to the 
transferring ‘set (s’ee Transfer Ringing Returnj. 
Transfer Ringing Return (program code 009, prepro- 
grammed for 1st transfer set/then master) - determines 
where a call will be transferred after the number of rings in 
Transfer Ringing have occurred. 
Zone Paging (program code 5YY, preprogrammed for no 
zones) - places stations into specific zones for receiving 
zone .paging announcements. Zone paging announcements 
are heard only at stations assigned to a designated zone. A 
station can be assigned to no more than one zone. 
. 
Panther 2064 * . ‘. 
Page F-.28 -TRi.LLIUh/l 
Telephone 
Systems  
						

							. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .._ . . ._..... . . . . . . . ....... . . . 
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. .. . ...... ...... . ....:: ::: :::: :: 
Technical 
Service Operating 
Manual Instructions 
Function User Action i 
Set/System Response 
Account Codes (SMDR Unit) ; Anytime during a call, press i . . . 
j Conference. 
The Account Code feature must be pro- j 
grammed (enabled) for account codes to i Dial 4-digit account code. (If account i Account code appears in SMDR print- 
show up in SMDR printout. i code is entered incorrectly, start over by i out (see page D-22). Distant party will 
i pressing Conference again.) i not hear dialed digits. 
Background Music 
The optional external music source 
must be connected. To turn on background music at your i Continuous tone is heard, and 
Set, press intercom. intercom indicator WINKS slowly. 
Dial ‘4. 
To cancel background music at your i 
Continuous tone is heard, and 
Set, press Intercom. intercom indicator WINKS slowly. 
: Dial’4. intercom indicator goes OFF, and 
music is heard through your Set’s 
speaker. 
intercom indicator goes OFF, and 
music is no longer heard through your 
Set’s speaker. 
Busy Override (responder is on an in- 
ternal call) 
Busy override has no effect on a Set 
that has activated Do Not Disturb. 
In any event, responder may ignore 
busy override signals. Initiator: After dialing another station 
and encountering a broken tone (indi- 
cating that the dialed station is busy), 
press #. 
Responder: 
INon-handsfree*] Hang up and then lift 
handset. At the busy station: 3 ringing bursts are 
heard each time # is pressed. 
At ihe busy station: 
Existing internal call is disconnected, 
and you are automatically connected to 
station initiating busy override signal. 
lJJandsfree*] 
Press Speaker twice. i Existing internal call is disconnected, 
; and you are automatically connected to 
i station initiating busy override signal. 
* Throughout this Section, where there is an operating difference, the non-hand&e step precedes the 
equivaht handsbee step - perform only 
one version. 
The handsfree step requires a Handsfree Set that is aireudy in the handsbee operating mode (see Handsfree on page G-9). 
:::::::::::::::::“::::::::l:::I:::::~:::::::::::::::::::::::~:~:::::::::::::~:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ........... 
y . . . . . . . . . . . . . . . . . . . . . . . . * . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..... 
‘TRILLIUM ’ 
-. 
Telephone Panther 2664 
Systems PaEe G-l  
						

							Operating 
Instruktiofis Technical 
Service 
Manual 
Function 
Busy Override (responder is on an out- 
side call) 
Busy override has no effect on a Set 
that has activated Do Not Disturb. 
In any event, responder may ignore 
busy override signals. 
If optional external music source is con- 
nected, outside party will hear 
background music while on hold. 
Callback 
If. the Transfer Ringing Return feature is 
so programmed, a .transfetred call (see 
Transfer Ringing), will return to, the 
%transferring Set after a programmed 
number of rings. 
Call Hold (outside call) 
If optional external music source is con- 
nected, outside party will hear 
background music while on hold. 
If so programmed, Hold Recall Time 
feature sounds reminder signal through 
speaker after call has been on hold for 
program-selected period*. 
- 
User Action j Set/System Response 
Initiator: After dialing another station i At the busy station: 3 ringing bursts are 
and encountering a broken tone (indi- i heard each time# is pressed. 
eating that the dialed station is busy), i 
press#. 
Responder: At the buy station: 
F’ress Hold. Outside party is placed on hold, line in- 
dicator FLASHES quickly, and you are 
automatically connected to station ini- 
tiating busy override signal 
To retrieve outside call, press appropri- 
ate line key. 
. . . 
INon-handsfree] To answer call, lift Line indicator WINKS slowly, and con- 
nection is reestablished. 
Ringing occurs, and line indicator 
FLASHES slowly. 
Line indicator WINKS slowly, and con- 
i- 
handset and. press.appropriate line key. i nection is established. 
. . .. 
[Handsfree] To answer call, press ap- ! Line indicator WINKS slowly, and con- 
propriate line key. : nection is established. 
While on outside call, press 
Hold. f Outside party is placed on hold, and line 
; indicator FLASHES quickly. 
[Non-handsfree] To retrieve call, lift i Line indicator WINKS slowly, and con- 
handset and press appropriate line key. ! nection is reestablished. 
[Handsfree] To retrieve call, press ap- i Line indicator WINKS slowly, and con- 
proprizite line key. : nection is reestablished. 
[Non-hand&eel To end call, hang up i Line indicator goes OFF, and connec- 
handset ; tion is terminated. 
j [Handsfree] To end call, press i Line indicator goes OFF, and connec- 
- 
i spa&F .-._...__ .-_- 
..--- i tion is terminated. 
* Options include no reminder - or reminder after 1.5 minutes, 3 minutes, or 3 minutes with call release after 5 minutes. 
. 
a. ........................... . ............................................................................... .:. ........ . ...................................................................................... a................................................: ................. 
................................................................................................................................................................................................................................................................................ 
Panther2064 ‘. . ” ‘. 
Page G-2 TRILLIUM 
Telephone 1 
Systems  
						

							Technical 
Service 
Manual 
Function I User Action i 
Set/System Response 
Calling the Attendant : press Intercom. 
This procedure will connect you with j ; Continuous tone is heard, and 
; Intercom indicator WINKS 
slowly. 
the master set (usually station 10, but I DialO. i Repeated long tones are heard. 
programmable by the Master Set j 
Assignment feature to any station). j When attendant answers, lift handset. i You are connected to attendant at ma.+ 
: terset. 
Call Transfer (outside call) - voice j Trun$erringpmy: j At tranqferring station: 
anmunce method 
; While on an outside call, press Hold. i Outside party is placed on hold, and line 
This procedure requires a DSS/BLF I i indicator FLASHES quickly. 
Unit; otherwise, use the internal dialing i 
method. i Press desired station select key. i 
Desired station is dialed. (At dialed sta- 
: tion, one tone burst is heard, Intercom 
If so programmed, Auto Hold feature i - i indicator goes ON, and line indicator 
eliminates need to press Hold since call j 
will automaticaliy be placed on hold [ j FLASHES very slowly.) 
. when station select key is pressed. i Announce which line call is on. Hang  ‘(Receiving party acknowledges call 
:, up. . 
If optional external music source is con- j i transfer announcement.) 
’ .‘_I. 
netted, outside party will hear i man-handsfree] To retrieve call (if re- j Line indicator WINKS slowly, and con- 
background music while on hold. i ceiving party does not respond), lift I nection is reestablished. 
: handset and press appropriate line key. i 
j [Handsfree] To retrieve call (if receiv- j Line indicator WINKS slowly, and con- 
: ing party does not respond), press ; nection is reestablished. 
I appropriate line key. 
i Receiving party: i At receiving station: 
; /Non-ha&free] Lift handset and press i Line indicator WINKS slowly, and con- 
; appropriate line key and lift handset. ; nection is established. 
j lJIandsfree] Press appropriate line key i Line indicator WINKS slowly, and con- 
; and lift handset i nection is established. 
* Options include no reminder - or reminder after 1.5 minutes, 3 minutes, or 3 minutes with call release after 5 minutes. 
:y::::; ::::::: I” ::::::::.::::::y:: :‘,:::y:::.; :::::::::::::::::::::: z ::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: :..+ :::::::::::::::: ~ :::::::::::::::::::::::::::; :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: : :::::::: :” . . . . . . . . . . . . . . . . . 
. . . . . . . . . . . . . . . . . 
_. TRILLIUM 
Telephone 
Systems Panther 2064 
Page G-3  
						

							Operating 
Instrikti0~s Technical 
Service 
Manual 
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . * . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ........................... , 
.......,.......,..............,........................,.....................,.............,....................,......... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..I.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..__ . . . . . . . . .._.... ......... . . ........ ._ 
Function j User Action i 
Set/System Response 
Call Transfer (outside call) - internal 
dialing method 
If optional external music source is con- 
nected, outside party will hear 
background music while on hold. 
If so programmed, Hold Recall Time 
feature sounds reminder signal through 
speaker 
ufrer call has been on hold for 
program-selected period*. 
Transferring party: At transferring station: 
While on an outside call, press Hold. Outside party is placed on hold, and line 
indicator FLASHES quickly. 
press Intercom. 
Dial desired station (10-73). Hang up. 
. . . 
[Non-handsfree] To retrieve call (if re- 
ceiving party does not respond), lift 
handset and press appropriate line key. 
’ I j.@Iandsfree] To retrieve call (if receiv- 
ing party does not’ respond), press 
appropriate line key’. 
Receiving party: 
[Non-handsfree] Lift handset and press 
appropriate line key. 
[Handsfree] Press appropriate line key. Continuous tone is heard, and 
Intercom indicator WINKS slowly. 
(At dialed station, repeating intercom 
ringing is heard, Intercom indicator 
goes ON, and line indicator FLASHES 
very slowly. Receiving party answers 
internal call and acknowledges 
announcement .) 
Line indicator WINKS slowly, and con- 
nection is reestablished. 
Line indicator-WINKS slowly, and con- 
nection is re%z&.ished. - 
At receiving station: 
Line indicator WINKS slowly, and con- 
nection is established. 
Line indicator WINKS slowly, and con- 
nection is established. 
camp-on 
If a called is transferred to you via 
Transfer Ringing, if the Transfer 
Ringing Return feature is programmed 
for no return, and if you are on a call - 
you will hear three short bursts indicat- 
ing that the transferred call has is now 
camped on your station. Press Hold. 
[Non-handsfree] Press the line key of 
the camped-on call. 
- : lJIandsfree]Dial~. - While busy on a call, you hear three 
short bursts, and line indicator with 
camped-on call FLASHES quickly. 
Outside party is placed on hold, and line 
indicator FLASHES quickly. 
Line indicator WINKS slowly, and con- 
nection is established with camped-on 
i WY. 
Line indicator WINKS slowly, and con- 
nection is established with camped-on 
* Options include no reminder - or reminder after 1.5 minutes, 3 minutes, or 3 minutes with call release after 5 minutes, 
: . 
c 
Panther 2064 . .’ . ‘, 
Page G-4 TRILLIUM : 
Telephone -- 
Systems  
						

							Technical 
Service 
Manual 
Function User Action I 
Sethvstem Response 
Common speed calls j [Non-ham&free] To retrieve call placed i Line indicator WINKS slowly, and con- 
; on hold, lift handset and press appropri- ; nection is reestablished. 
In handsfree operation, pressing * (as j ate line key. 
first entry in telephone number se- j 
quence) automatically selects last i [Handsfree] To retrieve call placed on i Line indicator WINKS slowly, and con- 
outside line used at station making call. ! hold, press appropriate line key. : nection is reestablished. 
[Non-ham&&e] Lift handset and press i 
Dial tone is heard, and line indicator 
outside line key. ; WINKS slowly. 
[Handsfree] Press * or outside line key. 
j Dial tone is heard, and line indicator 
j WINKS slowly. 
[Set without DSS/BLF Unit] Press ! Desired number is automatically dialed. 
Speed and dial 2-digit code (20 to 99) : 
for all common speed calls. 
[Set with DSS/BLF Unit] Press desired i Desired nurnber is automatically dialed. 
speed call key (DSS keys 20 to 73) for j 
first 22 common speed call numbers; i I 
press Speed and dial 2-digit’code-(74 j _ ’ 
to 99) for all other common speed calls. I 
Conferencing (initiator plus 2 outside 
parti 
If optional external music source is con- 
net ted, outside party will hear 
background music while on hold. 
Only one additional outside party can 
be added. While on outside call, press Hold. i Outside party is placed on hold, and line 
i indicator FLASHES quickly. 
Press another outside line key. j Dial tone is heard and selected line indi- 
j cator WINKS slowly. 
Dial (or speed call) third party’s tele- i Call is placed to third party. 
phone number. 
If third party answers, 
press i Conference call is established, and both 
* [ Conference, and then press line key of i 
j party on hold. tine indicators WINK slowly. 
i Alternatively. to retrieve original call (if i 
i third party does not respond), press line i 
: key of party on hold. Line indicator WINKS slowly, and 
connection is re-established. 
: Once conference call is established, to i 
.i place both outside parties on hold, press i Both outside parties are placed on hold, 
and .both outside line indicators FLASH 
[continued on next page] ; Hold. 
; quickly. 
Telephone 
Systems Panther 2064 
Page .G-5  
						

							Operating 
Instrutitiori~ Technical 
Service 
Manual 
Function I User Action j Set&stem Response 
Conferencing (initiator plus 2 outside To return to conference call once both 
parties) parties were placed on hold: 
[continued from previous page] 
l Press line key of either outside 
Party* 
l Press Conference and line key of 
remaining outside party. 
To change to 2-party call once confer- 
ence cali is established, press line key 
of party you wish to keep. 
. . . 
0 Connection with selected outside 
party is re-established, and selected 
line indicator WINKS slowly. 
l Conference call is re-established, 
and both line indicators WINK 
slowly. 
Connection with selected outside party 
remains established (corresponding line 
indicator continues to WINK slowly), 
and connection with other outside party 
is terminated (other line indicator goes 
OFF). 
Conferencing (initiator plus 2 internal While on internal call, press i Inter&m indicator WINKS slowly, 
.parti=j.- . I. lt _ (32nference. - _ 
.” .i, and continuous tone. is heard. 
3 a . . 
. 
Only one addition~al internal party can j Dial the desired 2-digit station number i Desired station is dialed. (At dialed sta- 
ke added. : - or, with DSS/BLF Unit, press de- i tion, one tone burst is heard, and 
: sired station select key. i 
Intercom indicator goes ON.) 
Any internal party can end participation j 
in conference call by hanging up : Make announcement j Called internal party answers, and con- 
handset. i ference call is established. 
- 
Conferencing (initiator plus 1 outside I While on outside call, press Hold. i Outside party is placed on hold, and line 
and 1 internal party) i indicator FLASHES quickly. 
If so programmed, Auto Hold feature 
eliminates need to press Hold since call 
will automatically be placed on hold 
when station select key is pressed. 
If optional external music source is con- 
nected, outside party will hear 
background music while on hold. 
Only one additional internal party can 
be added. 
Any party can end participation in call 
by hanging up handset. Dial the desired 2-digit station number Desired station is dialed. (At dialed sta- 
- or, with DSS/BLF Unit, press de- tion, one tone burst is heard, and 
sired station select key. intercom indicator goes ON.) 
Make announcement 
If internal party answers, press 
Conference, and then press line key of 
party on hold. 
To retrieve call (if internal party does Original 2-party call with outside party 
not respond), press line key of party on is re-established. and line indicator 
hold . WXNKS slowly. 
. . . 
A 3-party mixed conference call is 
established 
TRILLIUM 
Telephone 
Systems 
Page G-6  
						

							Technical 
Service Operating 
Manual Instructions 
::::::::: ~~ ::::::::::::::::::::::: :;:::::::: y:::::::::: 
~~~~~~~......“......,...............................................................................................................................................................................~...~...,........ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . , . . . . . . . . . . ... . . . . . . 
Function 
Do Not Disturb 
Do Not Disturb prevents all calls and 
paging announcements from ringing at 
your station. Anyone trying to call will 
receive broken tone. 
The Intercom indicator continues to 
FLASH while Do Not Disturb is 
activated. 
User Action 
Sethvstem Response 
To activate Do Not Disturb, press 
Intercom. Continuous tone is heard, and 
InterCOm indicator WINKS slowly. 
Dial ‘6. Tone stops, Intercom indicator 
FLASHES, and Do Not Disturb is 
activated. 
To cancel Do Not Disturb, press 
Intercom. 
Dial ‘6. Tone stops, I n t e r corn indicator  Continuous tone is heard, and 
Intercom indicator WINKS slowly. 
Door Answering ! (Visitor presses door button at i Line 10 or 20 indicator FLASHES 
: entryway.) 
For station to receive’signals from Door i : slowly, and appropriately programmed 
; stations will hear signals indicating 
Answer Unit; station must be pro- i i which entryway visitor is calling from: 
. grammed (via Ringing Assignment ; i four groups of 4 short bursts each, if 
feature) to receive ringing signals on i 
-. j visitor is at Door Module 1; 
four groups 
hne 10 for the Door Answer.Unic con- i. .* - 
” j of. 2 long bursts each, if visitor is at 
netted to the master KSU - and line i j Door Module 2. . 
20 for the Door Answer Unit connected j 
to the expander KSU. : [Non-handsfree] To answer call from i Line 
10 or 20 indicator WINKS slowly, 
: either door module, lift handset and i and connection is made with visitor 
Do Not Disturb must also be de- i press line 10 or 20. j who needs only respond by talking in 
ZICtiVti. i direction of door module. 
j [Handsfree] To answer call from either i Line 10 or 20 indicator WINKS slowly, 
! door module, press line 10 or 20. i and connection is made with visitor 
: who needs only respond by talking in 
: direction of door module. 
; INon-hand&e] To end call with either i Line 10 or 20 indicator goes OFF, and 
; door module, hang up handset. i connection with visitor is terminated. 
i IJ-Iandsfree] To end call with either door i Line 10 or 20 indicator goes OFF, and 
i module, press Speaker. i connection with visitor is terminated. 
. 
::::::-~E:::::::::::::::::;;:::i::::~::::::::::::::~::::::::~:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: :::::::::::::::::::::::::::::::::::::: f: ::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: ::: ::::::::::::::::::::::: 
TRILLIUM : 
Telephone 
Systems . Panther 2064 
Page .G-7  
						

							Technical 
Service 
Manual 
Function 
Door Calling (to Door Module 1 only) 
Calls 
cannot be placed to Door Module 
2 
ExclusiveCal; Hold (outside call) 
While line is on Exclusive Call Hold at 
your station, the corresponding line in- 
d$ator afother stations is ON st&dily. 
If optional external music source is con- 
nected, outside party will hear 
background music while on hold. 
If so programmed, Hold Recall Time 
feature sounds reminder signal through 
speaker after call has been on hold for 
program-selected period*. 
Executive Override 
The Executive Override feature must be 
programmed (enabled) for your Set. 
User Action 
[Non-handsfree] To place call to Door 
Module 1, lift handset and press line 10 
for master KSU’s Door Answer Unit - 
or line 20 for expander KSU’s Door 
Answer Unit; 
[Handsfree] To place call to Door 
Module 1, press line 10 or 20. 
Bon-handsfree] To end call with Door 
Module 1, hang up handset. 
[Handsfree] To end call with Door 
Module 1, press Speaker. 
While on outside’call, press Hold twice. 
[Non-handsfree] To retrieve call, lift 
handset and press-appropriate line key. 
[Hand&e] To retrieve call, press ap- 
propriate line key. 
[Non-handsfree] To end call, hang up 
handset. 
[Handsfree] To end call, press 
Sp&ker. 
Set/System Response 
Line 10 or 20 indicator WINKS slowly, 
and one ringing burst is heard at entry- 
way where Door Module 1 is installed, 
Person being called responds by talking 
in direction of Door Module 1. 
Line 10 or 20 indicator WINKS slowly, 
and one ringing burst is heard at entry- 
way where Door Module 1 is installed. 
Person being called responds by talking 
in direction of Door Module 1. 
Line 10 or 20 indicator goes OFF, and 
connection with visitor is terminated. 
Line 10 or 20 indicator goes OFF, and 
connection with visitor is terminated. 
Outside party is placed on hold, and line 
indicator FLASHES very quickly. 
Line indicator WINKS slowly,,and cpn- 
iection’ is reestablished. 
Line indicator WINKS slowly, and con- 
nection is reestablished. 
Line indicator goes OFF, and connec- 
tion is terminated. 
Line indicator goes OFF, and connec- 
tion is terminated. 
[Non-handsfree*] To enter a call al- f Continuous tone is heard, and 
ready in progress at another station’lift f Intercom indicator WINKS slowly. An 
handset and press Intercom. Press * i intrusion tone sounds on the existing 
and the line key of the line you wish to f call’s line to alert the parties to the over- 
override. : ride, and you are connected to the call 
: on that line. 
[Handsfree*] To enter a call already in i Continuous tone is heard, and 
progress at another station, press i Intercom indicator WINKS slowly. An 
Intercom. Press 
l and the line key of t intrusion tone sounds on the existing 
the line you wish to override. i call’s line to alert the parties to the over- 
: ride, and you are connected to the call 
: on that line. 
* Options include no reminder 1 or reminder after 1.5 minutes, 3 minutes, or 3 minutes with call release after 5 minutes. 
‘TRILLIUM 
Telephone 
Systems  
						

							Technical 
-Service Operating 
. Aanuqi. ._ ‘, . Instructions 
,......_.....................................................,.................................. :..: . . . . . . . . . . . . . . . . . . . . . . 
. . . . . . . . . . . . . . . . . . ,,,.... ..I... . . . . . . . . . . . . . ..*........... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . “:::::::::::::::::::::::::::::i:::::::::::::::::::::::::::::::::::::::::::::::::::::::~:::::::::::::::::::::::: ::::::::::::::::::::::::::::::::::::::: 
Function j User Action .i . Set/System Response 
Flash/Cancel : While on an outside call, to use flash, i Call is put on hold; and dial tone is 
( 
PESS Flash/Can&l. (returned . 
Flash/Cancel can be programmed as j 
flash or as cancel - but not both. See j While on an outside call, to use cancel, i Call is terminated; and dial tone is 
Flash or Cancel feature. 1 
press Flash/Cancel. j returned. 
Handsfree (requires Handsfree Set) i To enter handsfree mode from non- i Mic.on/off indicator goes ON, and you 
: handsfree mode while handset is in i converse with called parties through the 
When Mic.on/off indicator is ON and j cradle, press Mic.on/off. : speaker and microphone. 
handset is in cradle, Set is in handsfree j 
operating mode. j To enter non-handsfree mode from i You converse with called parties 
j handsfree mode while hands& is in i through the handset. 
To end a call while in handsfree mode, i cradle, lift handset. 
press Speaker. 
I To enter handsfree mode from non- i Mic.on/off indicator stays or goes ON, 
To end a call on a Handsfree Set that is ! handsfree mode when 4 call is in i and you converse with called parties 
operating in a non-handsfree mode - j progress, press Speaker, make sure ; through the speaker and microphone. 
or on a non-handsfree Set - hang up j that Mic.on/off indicator is ON (press i 
handset. ; Mic.on/off key if necessary), and hang ; 
) up handset 
Incoming Call 
The Ringing ~Assignment feature’deter- 
mines which stations will ring ‘in 
response to incoming calis - each sta- 
tion C&I be assigned to anywhere from 
no outside lines to ah outside lines. 
A station with Do Not Disturb activated 
will not ring in any event. (A calI comes in on an outside line.) : Corresponding line indicator FLASHES 
~ : slowlyandringingis heard. 
. 
: I :. 
[Non-hands&e] To answer incoming j Ringing&&, corre&nding ‘line indi- . 
call, lift the handset and press the ap- ; cator WINKS slowly, and you are 
propriate line key. ; connected to the outside caller. 
[Handsfree] .To answer incoming call, ! Ringing stops, corresponding line’indi- 
press the appropriate line key. f cator WINKS slowly, and you are 
: connected to the out&de caller. 
Intercom Call Pickup 
Unless prevented from doing so because 
of your line group type (see Line Group 
Type feature), you can answer intercom 
pages and internal calls intended for 
other stations from your own Set. mon-handsfree] Lift handset, and press j Continuous tone is heard, and 
Intercom. ; Intercom indicator WINKS slowly. 
[Handsfree] Press Intercom. I Continuous tone is heard, and 
! Intercom indicator WINKS slowly. 
Dial ‘3. : Tone stops. 
Dial the station number - or, with i You are connected to paging or calling 
DSS/BLF Unit, press station select key ; party. 
- for paged or called station. 
. . . . . . . . . . . . . . 
TRILLIUM 
Telephone 
Svstems Panther 2064 
Page G-9