Trillium Panther 2064 Technical Service Manual

							INDIVIDUAL GROUP FEATURES 
CAUTION 
Set BATTERY to ON at the master KSU to 
prevent loss of entered feature programming 
seiec tions. 
At station 10, Mlc.on/ 
off indicator WINKS 
Feature 
Programming Technical 
Service 
Manual 
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::~::::~:::::~::::::::~::::::::::::::::::::::::::::::::::::::::::::::: 
1 le,cted group: 
4* 
5 Dial the seleCted 
program code: dial 
the first digit, then 
the 2-digit number 
of the desired group 
(01 through 15 - 
represented by XX). 
Program the desired 
condition for the 
seleCted feature on 
the selected lines b) 
pressing the cor- 
responding line 
keys. 
Press the Hold 
key. The Mic.on/off 
indicator goes OFF. 
The indicators for the 
selected lines go ON. 
The Mic.on/off 
indicator FLASHES. 
* See the Program Code, Condition Description, 
and Indicator Status column entries in the feature pro- 
‘gramming table on the facing page. ’ 
Step 
1 
; 2 
3 
4 
Action Response’ 
At the K&, set 
1 PROGRAM to 
ON. 
At ‘the’KSU, : 1 
piess RESET. 
., ; .* 
. . . . 
At the KSU, set 
1 PROGRAM to 
OFF. 
At the KSU, 
press RESET again. . . . 
. . . 
. 
. 
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::;:::::::::::::::::::::;:::::::::::::::::::::::::::::::::::::::::::::~::::::::::~:::::::::::::::::::::::::::::::::::::~::::::::::::::::: ::::::::::: :::: :::::::x ::: ::::::::::::::::::; ::::::; :::::::::::::::::::::::: 
Panther 2064 
Page F-18 . . ” ‘. ~~~‘\~~ 
Systems  
						

							. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ._.. . . . . . . . . . . __ . . . . . . . . . ._..__ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . _ . . . . . . _ . . . 
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 
Technical 
Service Feature 
Manual Programming 
Feature Program Feature Condition Indicator 
Name Cadet Category Description* Statustt 
Line Grouping 8XX Individual line All lines** Lines 1 through 20 off 
Remove line 1 Line 1 on 
Remove line 2 Line 
2 on 
Remove line 3 Line 3 on 
Remove line 4 Line 4 on 
Remove line 5 Line 5 on 
Remove line 6 Line 6 on 
Remove line 7 Line 7 on 
Remove line 8 Line 8 on 
Remove line 9 Line 9 on 
Remove line 10 Line 
10 on 
Remove line 11 Line 
11 on 
Remove line 12 Line 12 on 
Remove line 13 Line 13 on 
Remove line 14 . Line 14 on 
Remove line 15 Line 15 on 
Remove line 16 .Line 16 on 
Remove line 17 Line 
17 on 
Remove line 18 Line.18on ‘- 
Remove line 19 ’ Line 19 on 
Remove line 20 Line 20 on 
t XX staods for desired group number (01 through 15). 
tt 
Any or all of the incoming lines can be assigned to a group by not pressing the indicated line keys: observe that the 
corresponding line indicators are ON. 
* Preprogrammed (factory default) conditions 
are shown in bold type. 
** If the Tenant Group by Station feature (code 4YY) is programmed for any condition other than no group (its preprogrammed 
condition) - that is, if any Sets have been assigned to any group - then the preprogrammed condition is for all outside 
lines to be assigned to each active group. 
Individual Group Feature Programming Table . . ..__.._................................................... : .._................... i . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . : . . . . . . . . . - . . . . . . . . . . . . . . . . . . . . . . . -. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...” . . . ...” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ........................ . 
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . * . . . . 
,i TRILLiJM’ 
- 
Telephone 
Systems .Panther 2064 
Page F-19  
						

							Feature 
Programming Technical 
Service 
Manual 
CALL RESTRICTIONS 
CAUTION 
Set BATTERY to ON at the master KSU to 
prevent loss of entered feature programming 
selections. 
At station 10, Mic.on/ 
off indicator WINKS 
Line 7 on; lines 8,9, 
and 10 off 1 indicating 
that the 1st digit in the 
call restriction may now 
in the desired call The pattern of indicators 
for lines 1 through 4 
represent the vuZue of the 
just dialed digit; and the 
pattern of indicators for 
lines 7 through 10 indi- 
cate the poSition of the 
next digit to be entered. 
Then, to program the next digit in the call re- 
striction (if you have already entered the 
desired number of digits for this call restric- 
tion, go to step 6) 
5 Return to step4 . . . 
until all the desired 
digits are entered. Then, to program the next call restriction: 
6 Press Mic.on/off. 
Return to step 3. 
Your Call restriction is 
now initialized; the next 
call restriction is now 
ready for programming. 
Finally, to exit the programming mode and 
save all your programming selections: 
8 Press Hold. 
9 Dial ‘015. At station 10, Mic.on/ 
off indicator goes OFF. 
To return ‘all call restrictions to their prepro-, 
grammed (factory default) conditions . . . 
Step 
L . 
1 Action , , Response.,. 
. 
At the KSU, set 
1 PROGRAM to 
ON. 
. . . 
At the KSU, 
press RESET. . . . 
At the KSU, set 
1 PROGRAM to’ 
OFF. 
At the KSU, 
press RESET again. 
* See the Access *Code, Preprogrammed 
Restriction, and Indicator Status column entries in the 
feature programming table on the facing page. . 
Panther 2064 - . 
Page F-20 TRILLIUM 
Telephone 
Systems  
						

							Technical 
Service 
Manual Feature 
Programming 
Feature Access 
Name 
Code 
Feature 
Category Preprogrammed 
Restriction Indicator 
Status? 
Call Restriction 900 
901 
902 
903 
904 
905 
906 
907 
908 
909 Call restiction No restriction 
No restriction 
No restriction 
No restriction 
No restriction 
No restriction 
No restriction 
No restriction 
0 .t* 
1 t*t . . . 
. . . 
. . . 
. . . 
. . . 
. . . 
. . . 
. . . 
. . . 
. . . 
i The indicators for line 7 through 10 indicate the digit position: 
.lst digit Line 7 on: lines 8, 9, and 
10 off 
2nd digit Lines 7 and 8 on; lines 9 and 10 off 
3rd digit Lines 7,8, and 9 on: line1 0 off 
4th digit Lines 7,8,9, and 10 on 
.I fid t.he.indicamrs for line 1 though 4 indicate the digit value:, 
Value = 0 Lines 1,2, 3, and 4 off 
Value = 1 Line 1 on: lines 2,3, and 4 off 
Vaiue = 2 Line 2 on; lines 1, 3, and 4 off 
Value = 3 Lines 1 and 2 on: lines 3 and 4 off 
Value = 4 Line 3 on: lines 1.2, and 4 off 
Value = 5 Lines 1 and 3 on; lines 2 and 4 off 
Value = 6 Lines 2 and 3 on: lines 1 and 4 off 
Value = 7 Lines 1,2, and 3 on; line 4 off 
Value = 8 Line 4 on; lines 
1,2, and 3 off 
Value = 9 Lines 1 and 4 on; lines 2 and 3 off 
Call Restriction Feature Programming Table 
’ TRILLI.UM . 
-. 
Telephone 
Systems 
Panther 2064 
Page F-21  
						

							Feature 
Programming 
.~ . . . .._.............. 
Technical 
Service 
Manual 
Verifying Call Restrictions 
At station 10, Mic.on/ 
off indicator WINKS 
. . . 
‘-” 
4t 
5t 
D verify an individual call restriction: 
f 
Dial the selected 
access code. 
To verify the 
next position in 
the selected call 
restriction, press 
Flash/Cancel. 
To verify the 
previous position 
in the selected call 
restriction, press 
Intercom. Line 7 on; lines 8.9, 
and 10 off - indicating 
that the 1st digit in the 
call restriction is now on 
display: and the pattern 
of indicators for lines .l. 
through 4 represent the 
value of the 1st digit. 
The pattern of indicators 
for lines 1 through 4 
represent the 
value of the 
selected digiS and the 
pattern of indicators for 
lines 7 through 10 indi- 
cate 
the posifion of the 
selected digit. 
The pattern of indicators 
for lines 1 through 4 
represent the value of the 
selected dig& and the 
pattern of indicators for 
lines 7 through 10 indi- 
cate 
the position of the 
selected digit. To erase the current individual call restriction 
(otherwise go to step 7): 
6 Press Mic.on/off. The call restriction is 
now completely emsed 
Finally, to exit the verification and program 
ming modes: 
8 
Press Hold. 
Dial ‘015. At station 10, Mic.on/ 
off indicator goes OFF. 
t See the Access . Code, Prepiogrammed’ 
Restriction, and Indicator Status column entries in the 
feature programming table on the previous page. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . : . . . . . . . . . . . . . . . . . . . . . . . . . . :: . . . . . . . . . . . . . ...” . . . . . ....... ...........; .................-............................................................................... : .........: ............. 
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .............. < ...,............................................ * .....,.... * ......................., * ................................................. 
. 
Panther 2064 - - - 7z&ytn. 
Page F-22 
Systems  
						

							Technical 
Service 
Manual Feature 
Programming 
[This page intentionally left blank] 
., TRILLIUM 
Telephone 
Systems . Panther 2064 
Page F-23  
						

							Feature 
Programming 
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 
::::::::::::::::::::::::::::::::::::::::::::::::::::: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 
::::::: 
SPEED CALL NUMBERS Common Speed Call Numbers 
Speed Call Programming Notes NOTE 
NOTES 
1. Entries up to 26 digits long may be stored 
as speed call numbers. 
2. Pressing the Hold key as part of the speed 
call number programming sequence inserts a 
halt in the dialing sequence; pressing the 
Flash/Cancel key inserts a hookswitch 
flash; and pressing the Conference key in- 
serts a pause. 
You may insert as many halts, flashes, and 
pauses as you wish as long as the total’key 
entry count does not exceed 26. 
. 3. Up to 80 common speed call numbers may 
- ‘be programmed into the system.- but only 
from station 10 or from the station assigned as 
the master set (See Master Set Assignment 
feature. 
Additionally, up to 11 private speed call num- 
bers may be programmed at each individual 
station. 
.‘ 
Technical 
Service 
Manual 
During common speed call number program- 
ming, the user at station 10 or the master set 
will leave the station’s handset in its cradle and 
listen to the indicated aural responses over the 
speaker. 
To program up to 80 common speed call num- 
bers into the system from station 10 or from 
the master set . . . 
Step 
i 
‘* 2 
3 Action Response 
Press the. Speed 
key: 
Dial the desired 
speed call code 
(from 20 to 99). 
Dial the number The continuous tone 
you wish to store stops; and the 
for the selected intercom indicator 
speed call code. continues to FLASH:  A continuous tone is 
heard over the Set’s 
speaker; and the 
Lntercgm indicator 
yMc3 slowly. 
‘* 
. 
The Intercom 
indicator FLASHES. 
4. Return to step 1. . . . 
I To stop. speed call number programming: 
Press the 
Speaker key. The Intercom 
indicator goes OFF, and 
the Set returns to normal 
operation. 
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . : . . . . . . . . . . . . . . . . L . . ..“.............................................~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ,.... . . . . . . . . . . . . . . . . , . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 
Panther 2064 . . .:z&\Fnt 
Page F-24 
Systems  
						

							Technical 
Service 
Manual Feature 
Programming 
Private Speed Call Numbers FEATURE DESCRIPTIONS 
NOTE 
During private speed call number program- 
ming, the station user will leave the station’s 
handset in its cradle and listen to the indicated 
aural responses over the speaker. Account Code (program code 0001, preprogrammed for 
no printout) - allows user-entered account codes to be part 
of the station message detail report (SMDR) printout when 
the optional SMDR Interface unit is installed. 
NOTE 
I 
To program up to 11 private speed call 
numbeis into the system . . . 
Step 
1 
., 2 
3 
Action 
Press the Speed 
key. 
Dial .the desired I 
spefxl~~code 
(00 through lo)*. 
Dial the number 
you wish to store 
for the selected 
speed call code. 
Response 
A continuous tone is 
heard over the Set’s 
speaker and the 
Intercom indicator 
W-INKS slowly. 
Thi. intercom 
indicator FLASHES: 
The continuous tone 
stops: and the 
Intercom indicator 
continues to FLASH. 
I To stop speed call number programming: 
Press the 
Speaker key. 
The Intercom 
indicator goes OFF, and 
the Set returns to normal 
operation. 
* If your Set has an accompanying DSS/BLF unit, you may 
program the first 10 private speed call numbers by pressing 
DSS keys 10 through 19 (brie per private speed call number) 
instead of dialing the c&es 00 through 09. However, to pro- Digit Timer (program code 008, preprogrammed for 10 
seconds) - sets the time before the Start Data Recording 
feature (007) starts. 
gram the 1.101 private speed call number, you must still dial 
the code 10 (no DSS key will program the 1 lth number). 
. 
. I 
;.: TRILLNJM~‘ 
- 
Telephone Panther 2064 
Systems Page F-25 
For Sets with accompanying DSS/BLF Units, 
since the same keys are used to select stations 
and to select the first 10 private or first 54 
common speed call numbers, the SPEED key 
must be pressed before pressing the desired pri- 
vate speed call key when dialing one of your 
private speed call numbers 
with auto hold 
enabled. 
Auto Hold (program cdde 000, preprogrammed for one 
touch speed dial h6ld) - allows, when enabled, a call to k 
simultaneously placed on hold and transferred by pressin, 
the desired station select key. 
AutbIMantial Return to OF&‘(pr&&n code 009, pre- 
programmed for automatic return to OFF) - determines 
whether the relay (used to control the external loud bell or 
other equipment as programmed under Relay Control) au- 
tomatically returns to the OFF state - or must be manually 
returned to OFF.. 
Call Restrictions (access codes 900 through ?09 are 
available for entering up to 10 user-defined l- to 4-digit se- 
quences: preprogrammed call restriction for access code 908 
= O***; and preprogrammed call restriction for access code 
909 = l***) -allows specific sequences, such as 411, PBX 
or CO access codes, exchange prefixes, or specific area 
codes, to be denied for Class B stations (see Toll 
Restrictions). 
Digits-to-Deny (program code 005, preprogrammed for 
the 8th digit) - determines which digit will be denied on a 
dialing attempt under Class B restrictions (see Call 
Restrictions).  
						

							Feature 
Programming 
;::::: 
Executive Override (program code 3YY, preprogrammed Flexible DSS Key Assignment (program code 7YY, 
for no override) - allows selected stations to override the preprogrammed for DSS 10 = station 10) - assigns the sta- 
privacy feature and enter an outside call that is in progress; tion select keys for Panther 306 and Panther 612 Sets used 
an intrusion tone is sounded to alert the call-in-progress par- with your Panther 2064 KSU to 6 consecutive or 12 consec- 
ties of the override. utive stations, respectively. 
Flash or Cancel (program code 001, preprogrammed for 
cancel) - defines the function of the Flash/Cancel key, 
hookswitch flash or cancel signal for ending calls. (The le- 
ngth of this signal must be properly set to provide the 
desired function; refer to Flash or Cancel Duration). For example, if this feature were programmed for DSSlO 
key = station 38, then any Panther 306 Set user could access 
station 38 with the DSS 10 key, station 39 with the line 
DSS 11 key, station 40 with the DSS 12 key, station 41 
with the line DSS 13 key, (circling back to) station 10 with 
the DSS 14 key, and station 11 with the line DSS 15 key. 
NOTE 
Generally, a flash signal is 500 milliseconds 
long, and a cancel signal is 1 second long; to 
make sure you choose the correct length, check 
the specifications for your PBX . 
Flash or Cancel Duration (program code 006, prepro- 
grammed for 1 second) - sets the length of the flash or 
cancel signal (see Flash or Cancel). 
. . 
Fiexihie CO. Line .Assignment @rogram code 6YY; 
preprogrammed for no assignment - eouiv+ent to line 1 
key = line 1) - assigns the station select keys for Panther 
306 and Panther 612 Sets used with your Panther 2064 KSU 
to 3 consecutive or 6 consecutive outside lines, respectively. 
For example, if this feature were programmed for Line 1 
key = line 7; then any Panther 306 Set user could access line 
7 with the line 1 key, line 8 with the line 2 key, and line 9 
with the line 3 key. 
And, with the same programming, any Panther 612 Set user 
could access line 7 With the line 1 key, line 8 with the line 
2 key, line 9 with the line 3 key, line 10 with the line 4 
key, (circling back to) line 1 with the line 5 key, and line 2 
with the line 6 key. 
Technical 
Service 
Manual 
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . * . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ........... 
I . . . . . . **.* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..I. . . . . . . . . ...*..* . . . . . * . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 
And, with the same programming, any Panther 612 Set user 
could access station 38 with the DSS 10 key, station 39 
with the line DSS 11 key, station 40 with the DSS 12 key, 
station 41 with the line DSS 13‘key. (circling back to) sta- 
tion 10 with the DSS 14 key, station 11 with the line DSS 
15 key, station 12 with the DSS 16 key, station 13 with,the 
DSS 17 key, station 14 with the line DSS 18 key, station 
.I5 with the DSS 19 key, station 16 with the line DSS 20 
key, and,station 17 with the DSS 21 key. 
~ Flexible Ringing Assig’ndekt (pro&m code. 2YY; 
preprogrammed for no ringing, except for station 10 which 
is preprogrammed to ring on all lines) - chooses which 
line or lines ring at which station or stations. When the op- 
tional Door Answer Unit is installed, line 10 must be 
programmed to ring at one or more stations. 
Hold Recall Time (program code 000, programmed for 
no recall) - enables reminders that you have a call on hold 
Incoming Calls Only ‘(program code 102, prepro- 
grammed no - to allow outgoing calls) - allows (no) or 
prevents (yes) outgoing calls on the indicated lines. 
Interdigit Pause (program code 001, preprogrammed for 
800 milliseconds) - sets the time between dialed pulses 
(see also Tone or Pulse). 
Panther 2064 
Page F-26 TRILLIUM 
Telephone 
Systems  
						

							Technical 
Service Feature 
Manual Programming 
I 
.._....._...,,... . . . . . . . . . . # . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. * ...................... . ....................................................................,.......................,........................, 
Line Grouping (program code 8Xx, preprogrammed for 
all lines) - assigns outside lines to one of 15 groups, there- 
by defining each group. (See also Line Group Type and 
Tenant Group By Station.) 
Line Group Type (program code 001, preprogrammed for 
Type A) - assigns one of four sets of characteristics to line 
groups. 
NOTE 
The more commonly chosen line group types 
areTypeAandTypeD. 
Type A = Sets assigned to a line group can only make 
and answer calls on lines within the group. 
Type B = Sets assigned to a line group can make and 
answer calls on lines within the group -plus 
they can 
answer calls ringing in another group. 
Type C = Sets assigned to a line group can make and 
answer calls on lines within the group -plus 
they can 
receive calls transferred from another group. 
Type‘D = Sets assigned to a line group can make and 
P’ 
- answer calls on lines within the group -plus they-can’ 
answer calls ringing in another group 
and can receive 
calls transferred from another group. 
(See also Line Grouping and Tenant Group By 
Station.) 
Loud Bell (program code QOO, preprogrammed for day and 
night bell) - determines when the dry contacts will close to 
activate the optional external loud bell, if installed. 
Day bell’ activates the ringer for.all lines selected in 
Loud Bell/Night Transfer Ringing Assign- 
ment. 
Night bell activates the ringer for all lines if at least one 
station has been chosen for Night Transfer. 
Day and night bell activates the ringer in both of the 
above cases. Loud Bell/Night Transfer Ringing Assignment 
(program code 103, preprogrammed for ringing) - deter- 
mines which lines will activate the optional external loud 
bell ringer when day bell or day and night bell is selected 
under Loud Bell. 
Manual/Auto Select (program code 000, preprogrammed 
for auto intercom) - determines whether an intercom or ex- 
ternal line is selected automatically when the handset is 
lifted or whether the selection must be made manually when 
the handset is lifted. 
- 
Master Set Assignment (program code 103, prepro- 
grammed for station 10) - allows master set functions 
(such as common speed call programming) to be assigned tc 
any station. 
NOTE 
Night transfer should be assigned to at least 
one station. 
Night Transfer (program ‘code 3YY, preprogrammed for. 
no transfer) - assigns ringing to all lines at the indicated 
station ‘after business hours, and to ~the’loud.bejl contacts .’ 
,when night beil is ‘selected under Loud Bell. . 
Pause on Number (program code 002, preprogrammed 
for no pause) - sets the system for a pause after a specific 
number or numbers are dialed as the first digit. This feature 
is used behind a PBX to allow for a second dial tone. 
Pause Time (program code 004, preprogrammed for 3 set- . 
onds) - sets length of pause for the Pause on Number 
feature and for a pause inserted by the Conference key 
when programming a speed call number. 
Relay control (program code 009, preprogrammed for 
control loud bell) - reflects the type of equipment attached 
to the dry contacts available at the KSU. ..* . . . . . . . . ..“....... ** . . . . . i . . . . . . . . . . . * . . . . ..^......................... * . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ** . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ~ . . . . . . . . . . . . . . . . . . . . . . . . . . . . ............................................................................ ‘ ..................... 
. . . . . . . ...” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ................... ” .............................................................................................................................., 
.TRIL’LIUM 
Telephone . Panther 2064. 
Systems Page F-27