Trillium Panther 2064 Technical Service Manual

							Technical 
Service 
-, Manual 
SET LAYOUT 
1. The speaker allows the user to monitor the progress of 
outside calls - and, with the Handsfree/Busy Lamp 
Field (HF/BLF) Set (as illustrated), to operate in a ha- 
ndsfree (speakerphone) mode. The speaker may also be 
used to listen to background music, when available, on 
both non-handsfree and handsfree Sets. 
2. The speaker volume control (not labeled) adjusts the 
loudness of sounds emitted by the speaker. 
3. The Speaker key is used to turn the Set’s speaker on 
and off - and, with handsfree Sets, to conclude a ha- 
ndsfree call. 
With handsfree Sets, in auto line, the Speaker key se- 
lects CO line; in auto intercom, the Speaker key 
selects intercom (see Manual/Auto Select feature). 
4. Two jacks (one on the base of the handset and the other 
on the left side of the Set) accept the plugs on the hand- 
set cord supplied with the Set. 
5. The handset cord (supplied) connects the handset with 
fj ~theSet. .‘. “. 
6. The handset transmits and receives voice signals. 
7. The Redial key redials the last number manually dialed 
from your Set. 
8. The tone dial pad is used in making calls and feature 
programming. 
In addition, two of these keys - when dialed first with 
the handset in its cradle - have special operating 
significance: 
# automatically selects the internal intercom line. 
9 automatically selects the last outside line used at 
your Set. 
9. The microphone detects and amplifies voice conversa- 
tion to enable handsfree operation (not present on non- 
handsfree sets). 
10. The Speed key is used to dial common speed call 
numbers; it also used to enter both private and common 
speed calI numbers into system memory. 11. The Mic.on/off key turns the Set’s microphone off and 
on. The indicator goes ON (lights) when the micro- 
phone is turned on; the indicator is also used in feature 
programming. 
NOTE: The key and indicator are present even on Sets 
without microphones (non-handsfree Sets). 
12. The Intercom key and indicator are used together or 
independently in setting the Do Not Disturb feature, 
’ making All Page, Zone Page, and other intercom calls, 
monitoring rooms, and activating the Barge-In feature. 
They are also used in feature programming and setting 
the call detail record (CDR) clock. 
13. The Conference key sets up 3-party calls. 
14. The Flash/Cancel key is used as either a precise le- 
ngth (programmable) hookswitch flash or as cancel 
key- but not both: 
As a hookswitch flash, it is used for accessing 
PBX, CEmX, and other network features. 
As a cancel key, it terminates external calls in .’ 
. . . 
- 
‘. pro.gress and returns a dial tone to ‘the user - with- 
out havingtohang up thehands& _ 
15. The line keys (1 through 20) select the indicated outside 
lines, and the corresponding indicators show the status 
of the outside lines. 
The keys and indicators are also used in feature 
programming. 
NOTE: Line 10 is used for door answering, rather than 
as an outside line, when the Door Answer Unit is in- 
stalled. If a second Door Answer Unit is installed, it 
will use line 20. 
16. The plastic cover protects the Designation Card, which 
is used to keep track of outside lines. 
17. The station wiring jack is used to connect your Set to 
the station wiring: use the modular cord supplied with 
your Set 
18. The Hold key is used to place calIs on temporary hold. 
19. The ringer volume switch is a 3-position slide switch 
used to control the loudness of ringing at your Set. 
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ., . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..-.... . . . . . . . . . . . . . . . . . . . . . . . . . ... .. . .. . . . ......-. .....-.. .., 
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . * . . . . . . . . . . . . . . . . . . . . . .... C............ ..... I ..................-........ * ........ * ......,... **..** .......... *...*...*..* ................... * ................. *.* .........., 
f- ‘,; 
TRILLkjM : *.  Parithef 2064 . . 
Telephone ‘. 
Systems 
Page E-5  
						

							System and 
Set Layout Technical 
Service 
.Manual 
Station Wiring 
Jack 
r 
(back of unit) 
$E] 
Cards 
BLF Indicators 
. 
DSS/BLF UNIT LAYOUT DIAGRAM 
Panther 2064 
Page E-6 TRILLIUM ,. I 
Telephone 
Systems  
						

							Technical 
Service System and 
Manual Set Layout 
:::::::::::: :: ::::::::::::::::::::::. ‘: :::::::::::::::::::::: y...::: ::::::; :::::::::::::::::: ::: :::::::::::::: :::::-::..“................~ . . . . . . . . . . . . . . . . . :::::::::::::: ::::: :::::::-:::: ::::: :::::: :::: :::: ::::: ::::::::::::::: ::::: 
::::::::::::::::::::::::::; :::: ~::=: :::::::::::: :::::: :: 
. . . , 
1 st Pow& Fail 
Transfer Unit 
:?::::.+y.: . . . . . . . . . . . . . . . . . . . . .  . . . . . ..I.... . . . . . ..,.... ,C_ z . . . .  . . . . . . . 
; I . ‘..>.) LNJ f 
50-pin to !;I ii 1 
modular ‘.Tr..l,/ 
adapter 4 ; ._..,...-., ‘; . . . . r.* 41..1. ^ . . . ..-... I .1.1....1......4 
I . . . . . . ..- ~.,l^-,I..,“..,l . . . . . _ .,--.,......,... 
I -i-i I 
:NK, Transfer Unit 
/ TK3.4 
.--..--.-a 
..,.-... T.K1.:2...,, 
TYPICAL POWER FAIL TRANSFER UNIT LAYOUT DIAGRAM 
TRILLIUM 
Telephone 
Systems  
						

							. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . , . . . . . . . . . . . . . . . . . . . . . . . 
,....................................................................................,....................... ::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::~::::::::::::::: 
Technical 
Service Feature 
Manual Programming 
FEATURE CATEGORIES 
. Your Panther 2064 Electronic Key Telephone System has 
six different features categories: system-wide features that 
apply to all sets and all lines, such as Hold Recall Time; in- 
dividual Set features that apply only to selected stations, 
such as Flexible Ringing Assignment; individual line fea- 
tures that apply only to selected lines, such as Tone or Pulse 
dialing; individual group features that apply only to selected 
groups, such as Line Grouping; call restrictions (1 to 4 dig- 
its long); and speed call numbers (80 common, available at 
all Sets, and 11 private, unique to each individual Set). 
System-wide features, individual Set features, individual Set 
features, individual line features, individual group features, 
and call restrictions can only be programmed from the Set 
assigned as station 10. Common speed numbers must be 
programmed from the master set (station 10, unless pro- 
grammed differently); private speed call numbers are 
progrkmmed by Set users from their own individual Sets. 
Categories Versus Codes 
Programmable features are assigned to program codes - and 
sometimes more than one feature is assigned to a given pro- 
‘gram code,. For,example, the Hold Recall Time qnd Loud 
Programming ail the features that have the same program 
code at the same time is an efficient tiay to program the 
your system when 
if isjirst ins&zlfed: However, after initial 
installation, programming only those features that need to 
be changed becomes the most straightforward approach: 
The feature programming procedures and tables in this sec- 
tion are organized by 
feature category and, within each 
category, alphabetically by feature name - not numerically 
by program code. (The feature descriptions located at the end 
of this section are arranged simply in alphabetical order by 
feature name.) Thus, all these materials are designed to sup- 
port system changes, rather than system installation. 
Referencing Categories to Codes 
The table on the next 2 pages - organized by program code 
- provides page references to feature programming proce- 
dures, feature programming tables, and feature descriptions. 
, 
Interrelated Features 
Moreover (as listed below), groups of features are interrelated 
(features nor listed below are judged to be relatjvely 
independent). 
,’ 
Whenever you program or reprogram one of the features 
below, you should consider whether a corresponding 
change 
is required to the other features found in the same group. 
Behind PBXKENTREX-Related Features 
Flash or Cancel (OOl), Pause on Number (002). Pause Time 
(004), Flash or Cancel Duration (006). and Telephone or 
PBX Line (101) 
Group-Related Features 
Line Group Type (001). Tenant Group by Station (4YY). 
and Line Grouping (8xX) 
Hold-Related Features 
Auto Hold (000) and Hold Recall Time (OOQ) 
Restriction-Related .Features 
Digits-to Deny (005), Incoming Calls Only (102), Toll 
Restrictions (3YY), Executive Override (3YY), and Call 
Restrictions (900-909) 
Ringing-Related Features 
Loud Bell (UOO), Auto/Mar& Return to OFF (009), Re!ay 
Control (009). Simultaneous/Serial Ringing (&I!& Transfer 
Ringing (009), Loud Bell/Night Transfer Ringing 
Assignment (103), Flexible Ringing Assignment (2YY). 
Night Transfer (3YY), and Transfer Ringing Return (3YY) 
Set-Related Features 
Sets (3YY), Master Set Assignment (003). Flexible CO 
Line Assignment (6YY), and Flexible DSS Key 
Assignment (7YY) 
SMDR-Related Features 
Account Code (000), SMDR Printout (002), Start Data 
Recording (007). and Digit Timer (008) 
Tone/Pulse-Related Features 
Interdigit Pause (OOl), Tone Duration (OOl), and Tone or 
Pulse (100) 
TRILLIUM 
Telephone 
Systems . Panther 2064 
Page F-l  
						

							Feature Technical 
Programming 
Service . . 
Manual 
. 
> 
 . . 
Feature Program 
Name Code Feature 
Category Preprogrammed 
Condition Programming and Description 
Page References 
Common (20-99) 
Private Numbers 
Account Code None speed calling None . Programming: F-24lDescription: see Section G. 
None I’ speed calling None Programming:.F-25/Description: see Section G 
ooo System-wide No printout Programming: F-4 & F-S/Description: F-25 
Auto Hold OKI System-wide One touch speed dial Programming: F-4 & F-5/Description: F-25 
Hold Recall Time Ooo System-wide No hold recall Programming: F-4 & F-6/Description: F-26 
Loud Bell ooo System-wide Day and night bell Programming: F-4 & Fd/Description: F-27 
Manual/Auto 
Select ooo System-wide Auto intercom Programming: F-4 & F-7/Description: F-27 
Flash or Cancel 001 System-wide Cancel Programming: F-4 & F-6iDescription: F-26 
Interdigit Pause . 001 
Line Group Type 001 System-wide 
System-wide 800 milliseconds 
Type A Programming: F-4 & F-6/Description: F-26 
Programming: F-4 & F-6/Description: F-27 
Tone Duration 001 System-wide 100 milliseconds Programming: F-4 & F-8/Description: F-28 
Pause on Number 002 System-wide No pause Programming: F-4 & F-7/Description: F-27 
SMDR Printout 002 System-wide Outgoing toll calls Programming: F-4 & F-7/Description: F-28 
Master Set 003 System-wide Station 10 Programming: F-4 & F-7/Description: F-27 
Assignment 
PauseTime, 
.o@? ,._.  System-wide, 3 seconds Programming: F-4 & F-VDesqiption: P-27 
_. 
Digits-to-Deny 005 5 System-wide. 8th digit Programming: F-4 & F-S/Description: F-25 
Flash or Cancel . 006 System-wide 1 second Programming: F-4 & F-6jDescription: F-26 
Duration 
Start Data 
Recording 007 System-wide 5 seconds - Programming: F4 & F43/Description: F-28 
Digit Timer 008 System-wide 10 seconds Programming: F-4 & F-S/Description: F-26 
Auto/Manual 
Return to OFF 009 System-wide Automatic return 
to OFF Programming: F-4 & F-S/Description: F-25 
Relay Control 009 System-wide Control loud bell Programming: F-4 & F-7/Description: F-27 
Simultaneous/ 
Serial Ringing 009 System-wide Serial ringing 
Programming: F-4 & F-7/Description: F-28 
Transfer Ringing 009 System-wide 3 times Programming: F4 & F-8/Description: F-28 
Feature Programming Cross-Reference Table (Sheet 1 of 2) 
Panther 2064 
Page F-2 TRILLIUM 
Telephone 
Systems  
						

							Technical 
Service -Feature 
Manual Programming 
. . . . . . . . . . . 
..“.........................................................................~.................. : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...................................................... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..~.......................... , . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....................... . ........... . ..........~.......“............... I ...............*................................, . 
Feature 
Name 
Tone or Pulse 
Telephone or 
PBX Line 
Program Feature Preprogrammed 
Programming and Description 
Code* Category Condition 
Page References 
100 Individual line’ Tone. Programming: F- 14 & F- 17kscription: F-28 
101 Individual line 
Telephone Programming: F- 14 & F-15/Description: F-28 
Incoming 
Calls Only 102 Individual line No Programming: F- 14 & F- 16/Description: F-26 
Loud Bell/Night 
Transfer Ringing 
Assignment 103 Individual line 
Ring Programming: F-14 & F-16/Description: F-27 
Flexible Ringing 
Assignment 
Executive 
Override 2YY Individual Set 
3YY Individual Set 
No ringingt 
No override Programming: F-10 & F-l l/Description: F-26 
Programming: F-10 & F-l l/Description: F-26 
Night Transfer 3YY Individual Set 
No transfer Programming: F-10 & F-12/Descriution: F-27 
Sets 3YY Individual Set 
Panther 2064 Programming: F-10 & F-12/Description: F-28 
Toll Restriction 3YY Individual Set 
Class A Programming: F-10 & F-12/Description: F-28 
Transfer Ringing 
3YY Individual Set 
lst transfer set/ Programming: F-10 & F-13Description: F-28 
Return 
then master 
Tenant Group ’ 4YY No assignment Programming: F-10 & F-12jDescription: F-28 
By Station -’ ln+vidud set. ,_ ; : , . . . 
‘ 
. Zone Paging 5YY Individual Set 
No zbn$s Programming: F-10 & F-13/Deschptioni F-28 
Flexible CO Line 6YY Individual Set 
No assignment Programming: F-10 & F-l l/Description: F-26. 
Assignment 
Flexible DSS Key 7YY Individual Set 
DSS 10 = station 10 Programming: F-10 & F-l l/Description: F-26 
Assignment 
Line 
Grouping 8XX Individual group 
All linestt Programming: F- 18 & F-19/Description: F-27 
call 
Restriction 900-909 Call restriction 908 = 0”’ 
gag = 1”’ Programming: F-20 & F-21/Description: F-25 
* YY stands for desired station number (10 through 
41); and XX stands for desired group number (01 through 15). 
t Station 10 is preprogrammed to ring on all lines; all other stations are preprogrammed not to ring on any line. 
tt If the Tenant Group by Station feature (code 4YY) is programmed for any condition other than no group (its preprogrammed 
condition) -- that is, if any Sets have been assigned to any group - then the preprogrammed condition is for all outside 
lines to be assigned to each active grouu. 
Feature Programming Cross-Reference Table (Sheet 2 of 2) 
TRILLIUM 
Telephone 
Systems . Panther 2064 
. Page F-3  
						

							Feature 
Programming Technical 
Service 
Manpal 
. . . . . a . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .......................... 
. ..*. a . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....................................................... . . . . . . . . . . . . . . . . . . . . , . . . . 
> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..-............... 
. . . . . . . . . . . Y . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 
9 
SYSTEM-WIDE FEATURES 
CAUfION 
Set BATTERY to ON at the masterKSU to 
prevent loss of entered feature programming 
selections. 
To program system-wide features from station 
10, . . . 
2 Dial ‘015. At station 10, lblic.on/ 
off indicator WINKS 
slowly. 
Then, to program a selected feature: 
- - 
4* 
1 
5 Dial the selected 
program code. 
Program the desired 
condition for the 
sdecti feature by 
pressing one or 
more of line keys 1 
through 8 - or 
by dialing an access 
code-as 
insmlcted. 
Press Hold. Mic.on/off indicator 
goes OFF. 
The indicators for lines 
- 1 through 8 (or 1 
through 4) display the 
pattern shown in the 
table that starts on the 
facing page. 
Mic.on/off indicator 
WINKS slowly. 
Then, to program another feature (if all de- 
sired features have been programmed, go to 
step 7): 
5 Return to step 3. . . . 
* See the Program Code, Condition Description, 
and Indicator Status column entries in the feature pro- 
gramming table that starts on the facing page. 
I Off indicator goes &F. 
o return 
all features to their preprogrammed 
(factory default) conditions . . . 
Step Action 
1 
At the KSU, set 
1 PROGRAM to 
ON. Response 
. . . 
2 At the KSU, 
press RESET. 
..I 
3 
At the KSU, set 
1 PROGRAM to 
OFF. . . . 
4 
At the KSU, 
press RESET again, 
,.-. ‘. 
‘. * 
.NOTE 
. . . 
‘-?G / 
System-wide features may be programmed in 
any order. Also, you may program as many or 
as few features as you desire. Therefore, in the 
. 
table that starts on the facing page, features are 
listed in alphabetical order to help you find the 
features you want quickly. 
‘Panther 2064 
Page F-4 TRILLIUM t: ..- 
Telephone 
Systems  
						

							. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..,......... . . . . . . . . . . . . . . . ..I. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..__. __ . .__. .__.._.. . . . . . __ 
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .._............. Technical 
Service Feature 
Manual . -Programming 
Feature Program Feature Condition Indicator 
Name Code Category Description* Status 
Account ooo 
System-wide No printout. 
Line .8 off _ 
Code Printout 
Line 8 on 
Auto Hold ooo System-wide One Touch Speed Dial Line 5 off 
Auto hold 
Line 5 on 
Auto/Manual 
Return to OFF 009 
System Wide Automatic return to OFF Line 5 off 
Manual return to OFF Line 5 on 
Digits-to- 005 System-wide No digits @I)** 
Lines I, 2,3, and 4 off 
DRY 1st digit (Ol)** Line 1 on; lines 2, 3, and 4 off 
2nd digit (0’2)** Line 2 lines 1, 3, and 4  on; off 
3rd digit (03)** Lines 
1 and 2 lines 3 and 4 off  on; 
4th digit @I)** Line 3 on; lines 1, 2, and 4 off 
5th digit (05)** Lines 1 and 3 lines 2 and 4 off  on; 
6th digit (06)** Lines 2 and 3 lines 1 and 4 off  on; 
7th digit (07)** Lines 1 ,2, and 3 Line 4 off  on; 
8th digit (08)** Line 4 on; lines 
I, 2, and 3 off 
9th digit (09)** Lines 1 and 4 lines 2 and 3 off  on; 
10th digit (lo)** Lines 2 and 4 lines 1 and 3  on; off 
11th digit (ll)** 
Lines 
I, 2, and 4 on; line 3 off 
12th digit (12)** Lines 3 and 4 lines 1 2  on; and off 
13th digit (13)** Lines 1, 3, and 4 line 2 off  on; 
1’4th digit (14)** 
Lines 2,3, and 4 line 1 off  on; 
15th digit (15)** . .  _ , Lines 
I, ?, 3, and 4,on 
Digit Timer 
008 System-wide 1 second (OO)** 
Lines I, 2,3;and 4 .off 
2 seconds (Ol)** Line 1 lines.2, 3, and 4 off  on; 
3 seconds (02)** Line 2 lines I, 3, and 4 off  on; 
4 seconds (03)** Lines 1 and 2 lines 3 4 off  on; and . 
5 seconds$M)** Line 3 lines 1, 2, and 4 off  on: 
6 seconds (05)** Lines 1 and 3 lines 2 and 4  on; off 
7 seconds (OS)** Lines 2 and 3 lines 1 and 4 off  on; 
8 seconds (07)** Lines 1 2, and 3 Line 4 off  , on; 
9 seconds (08)** Line 4 lines I, 2, and 3 off  on; 
10 seconds (09)** Lines 1 and 4 lines 2 and 3 off  on: 
11 seconds (lo)** Lines 2 and 4 lines 
1 and 3 off  on; 
12 seconds (ll)** Lines 
I, 2, and 4 line 3 off  on; 
13 seconds (12)** Lines 3 and 4 lines 1 and 2 off  on; 
14 seconds (13)** Lines 1,3, and 4 line 2 off  on; 
15 seconds (14)** Lines 2,3. and 4 line 
1 off  on; 
16 seconds (15)** Lines 
I, 2, 3, and 4 on 
* Preprogrammed (factory default) conditions are shown in bold type. 
** Dial the access code shown in parentheses using the key pad; observe that the desired indicator pattern appears (see Indicator 
Status column). 
System-Wide Feature Programming Table (Sheet 1 of 4) 
TRILLIUM 
Telephone 
Panther 2064 
Systems Page F-5  
						

							Feature 
Programming ” Technical 
Service 
-Manual 
:::::::::::::::::::::::::::::::::::::”:::::::::::::::::::::::~::::::::::::::::::::::::::::::::::::::::~:::::::::::::::::::::::::::::~:::::::::::::::::::::::::::~:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::~~:::::::~::~:~ 
i 
.’ ., 3 
9 
. 
Feature Program Feature Condition Indicator 
Name Code Category Description* Status 
Flash or- 001 System-wide Cancel Line 6 off 
Cancel Flash I’ Line 6 on 
Flash or 
Cancel 
Duration 006 System-wide 20 milliseconds (OO)** 
40 milliseconds (Ol)** 
60 milliseconds (02)** 
80 milliseconds (03)** 
100 milliseconds (04)** 
200 milliseconds (OS)** 
3OO~milliseconds (M)** 
400 milliseconds (07)** 
500 milliseconds (08)** 
600 milliseconds (09)** 
700 milliseconds (lo)** 
800 milliseconds (1 l)** 
900 milliseconds (12)** 
1 second (13)** 
2 seconds (14)** 
3 seconds (15)** Lines 1,2,3, and 4 off 
Line 1 on; lines 2,3, and 4 off 
Line 2 on; lines 1,3, and 4 off 
Lines 1 and 2 on; lines 3 and 4 off 
Line 3 on; lines 1, 2, and 4 off 
Lines 1 and 3 on: lines 2 and 4 off 
Lines 2 and 3 on; lines 1 and 4 off 
Lines 
1 ,2, and 3 on: line 4 off 
Line 4 on; lines 
1,2, and 3 off 
Lines 1 and 4 on; lines 2 and 3 off 
Lines 2 and 4 on; lines 1 and 3 off 
Lines 
1, 2, and 4 on; line 3 off 
Lines 3 and 4 on; lines 
1 and 2 off 
Lines I, 3, and 4 on; line 2 off 
Lines 2,3, and 4 on; line 1 off 
Lines 1,2,3, and 4 on 
Hold 000 System-wide No hold recall Lines 
1 and 2 off 
Recall 1.5 minutes Line 
1 on; line 2 off 
Time -3 minutes Line 2 on: line 
1 off % 
s 3 minutes;.release @ 5  . . Lines.1 -and 2 on 
i&digit ’ 001 .-  System-wide 800 milliseconds Lines 3 and 4 off 
Pause 1100 milliseconds Line 3 line 4 off  on; 
700 milliseconds Line 4 on: line 3 off 
500 millisecondst Lines 3 and 4 on 
Line 001 System-wide Type A Lines 7 and 8 off 
Group TypeB Line 7 line 8 off  on; 
Type -~FC Line 8 off; line 7 off 
Type D Lines 7 and 8 on 
LQud ooo System-wide Neither bell Lines 3 and 4 off 
Bell Day bell 
Line 3 on; line 4 off 
Night bell 
Line 4 on; line 3 off 
Both day and night bell Lines 3 and 4 on 
* Preprogrammed (factory default) conditions are shown in bold type. 
** Dial the access code shown in parentheses using the key pad; observe that the desired indicator pattern appears (see Indicator 
Status column). 
t This value is not permitted when the Panther system is to be installed in Canada or connected to the Canadian Telephone 
Network. 
System-Wide Feature Programming Table (Sheet 2 of 4) 
Panther 2064 
Page F-6 . TRILLIUM 4. 
Telephone 
Systems  
						

							Technical 
Service . 
Manual Feature 
Programming 
Feature Program 
Name 
Code 
Feature 
Category Condition 
Description* Indicator 
Status 
h4anUayAuto 
Select ooo System-wide Auto intercom Lines 6 and 7 off 
h4amlal select Line 6 on; line 7 off 
Auto CO line Line 7 on; line 6 off 
Master Station 003 
Assignment 
Pause 002 
on 
Number System-wide 
System-wide Station 10 
(user-selectedtt) 
No pause 
Pause on 7 
Pause on 8 
Pause on 9 
Pause on 0 (Ignore indicator status) 
(Ignore indicator status) 
Lines 1,2,3, and 4 off 
Line 1 on? 
Line 2 ant 
Line 3 on? 
Line 4 ant 
Pause 
Time 004 System-wide 1 second (OO)** 
1 second (Ol)** 
2 seconds (02)** 
3 second! (03)** 
4 seconds (04)** 
5 seconds (OS)** 
>’ 6 seconds (06)** 
’ 
I 
.’ 7 seconds,(O?)** - 
8 seconds (Ofi)*+ 
9 seconds (09)** 
10 seconds (lo)** 
11 seconds (ll)** 
12 seconds (12)** 
13 seconds (13)** 
_ 14 seconds (14)** 
15 seconds (15)** Lines 1,2,3,and4off 
Line 1 on; lines 2, 3, and 4 off 
Line 2 on; lines 1, 3, and 4 off 
Lines 1 and 2 on; lines 3 and 4 off 
Line 3 on; lines 1, 2, and 4 off 
Lines 
1 and 3 on; lines 2 and 4 off 
Lines 2 and 3 on; lines 1 and 4 off 
Lines 1 i.2, and 3 on;. line 4 off 
-  Line 4 lines 2, 3  on; 1, ‘and off 
Lines 1 and 4 on; lines 2 and 3 off 
Lines 2 and 4 on; lines 1 and 3 off 
Lines 1, 2, and 4 on; line 3 off 
Lines 3 and 4 on: lines 1 and 2 off 
Lines and 4 line 2 off  1,3, on; 
Lines 2,3, and 4 on; line 
1 off 
Lines 
1, 2, 3, and 4 on 
Relay 
Control 
009 System-wide Control loud bell 
Control other equipment Line 4 off 
Line 4 on 
Simultaneous/ 009 
Serial Ringing System-wide S’erial ringing 
Simultaneous ringing Line 3 off 
Line 3 on 
SMDR 
Printout 
002 System-wide Outgoing toll calls 
All outgoing calls 
All incoming calls 
All calls Lines 5 and 6 off 
Line 5 on; line 6 off 
Line 6 on; line 5 off 
Lines 5 and 6 on 
* Preprogrammed (factory default) conditions are shown in bold type. 
** DiaI the access code shown in parentheses using the key pad; observe that the desired indicator pattern appears (see Indicator 
Status column). 
i Any combination of numbers 7 through 0 to pause on can be programmed by pressing the indicated keys: observe 
that the corresponding indicators go ON. 
it Dial in the station number of the Set you wish to become the master station. 
System-Wide ,Feature programming Table (Sheet ,3 of 4) ::::::::::~:::::::;:::::::::::::^::::::::::::::::::::::::::::::::::::::::::::::::::~:::::::::~:::::~:::::::::::::::::::::~::::: :::::::::::::::::::::::::: L’ :::::::::::::::::::; ::::::::::::::::::::::::::::::::”::::::::::::::::::: z ::::::::::::::::::::::::::: x ::::; 
) TR[LLIU-M . ‘. .- ,’ ., . 
.- Telephone Panthe; 2064 
Systems Page F-7