Toshiba Strata Xii, Strata Xx General Description Manual

SYSTEM PROGRAMMING 
SECTION 100-020-300 
JUNE 1983 
TABLE 22 
PROGRAM 6Xx- TOLL RESTRICTION CLASSIFICATION 
1. Operate the SET switch on the MCAU 
NOTE: 
For multiple station programming, refer 
to Paragraph 02.22. SPKR LED flashes continuously 
INT & CO LEDs will be on according to 
4. Refer to the System Record Sheet. 
Using the m & m keys, turn the 
associated LEDs on or off, as required. 
The detailed meaning of each key is 
shown below. If the LED is already on, pushing the 
associated key will turn...

SYSTEM PROGRAMMING 
SECTION 100-020-300 
JUNE 1983 
TABLE 23 
PROGRAM 7XX-STATION OUTGOING RESTRICTION . . 
LED on MCAU on 
1. Operate the SET switch on the MCAU Station 17 MW/F L LED on 
System is in program mode 
Normal functions halt on Station 17 
2. Operate the ‘=I key on Station 17 
3. Dial 
q q Bon the dial pad 
XX = the station number of the station 
to be programmed. 
NO TE: 
For multiple station programming, refer 
to Paragraph 
02.22. 
SPKR LED steady on 
SPKR LED flashes continuously 
CO LEDs...

SYSTEM PROGRAMMING 
SECTION 100-020-300 
JUNE 1983 
TABLE 24 
PROGRAM 8Xx- CO RINGING ASSIGNMENTS-DAY 
LED on MCAU on 
1. Operate the SET switch on the MCAU Station 17 MW/FL LED on 
l ’ 
System is in program mode 
. 
Normal functions halt on Station 17 
2. Operate the [=I key on Station 17 
3. Dial 
q q q on the dial pad 
XX = the station number of the station 
to be programmed. 
NOTE: 
For multiple station programming, refer 
to Paragraph 02.22 SPKR LED steady on 
SPKR LED flashes continuously 
CO LEDs...

SYSltM rww-imfmw4~ 
SECTION 100-020-300 
JUNE 1983 
TABLE 25 
PROGRAM 8#XX- 
CO RINGING ASSIGNMENTS-DAY 2 
1. Operate the SET switch on the MCAU LED on MCAU on 
Station 17 MWIFL LED on 
System is in program mode . . _ 
Normal functions halt on Station 17 
2. Operate the i-1 key on Station 17 
3. Dial 
q m m Fj on the dial pad 
XX.= the station number of the station 
to be programmed. 
NOTE: 
For multiple station programming, refer 
to Paragraph 02.22 SPKR LED steady on 
SPKR LED flashes continuously 
CO...

SYSTEM PROGRAMMING 
SECTION 100-020-300 
JUNE 1983 
TABLE 26 
PROGRAM 9Xx -CO RINGING ASSIGNMENTS - NITE 
1. Operate the SET switch on the MCAU LED on MCAU on 4 
Station 17 MW/FL LED on _ 
System is in program mode 
Normal functions halt on Station 17 
2. Operate the ‘-1 key on Station 17 
3. Dial m [T; on the dial pad 
XX = the station number of the station 
to be programmed. 
NOTE: 
For multiple station programming, refer 
to Paragraph 
02.22 
SPKR LED steady on 
SPKR LED flashes continuously 
CO LEDs...

‘TOSHIBA SYSTEM PRACTICES ‘, 
ELECTRONIC KEY TELEPHONE SYSTEM OPERATING PROCEDURES 
SECTION 100-020-400 
_ JANUARY 1984 
4 
Strata 
xmm8tm 
OPERATING PROCEDURES  

 TOSHIBA  SYSTEM PRACTICES 
ELECTRONIC  KEY TELEPHONE  SYiTEM 
SW-eta 
XMdkXX 
OPERATING  PROCEDURES 
OPERATING  PROCEDURES 
SECTION  100-020-400 
JANUARY  1984 
TABLE OF CONTENTS . . 
SUBJECT  PAGE 
PARAGRAPH 
01  
02 
02.00.0  
02.01.0  
02.02.0 02.03.0  
02.04.0  
02.10.0  
02.11.0  
02.12.0 
02.13.0 
02.14.0  
02.15.0  
02.16.0 
02.17.0 
02.18.0 02.19.0  
02.20.0  
02.21.0 
02.22.0 
02.23.0 
02.24.0 
03  
03.00.0  
03.01.0  
03.10.0  
03.11.0  
03.12.0 
03.13.0 03.14.0  
04  
04.00.0 
04.10.0...

01 INTRODUCTION 
01.00.1 
The operation of the various pieces of 
equipment for the STRATA XII & XX electronic 
key telephone systems will be described in this 
section. The DSS and EKTs are specially designed 
units incorporating, as standard features, handsfree 
answering and full speakerphone capabilities. Each 
DSS and EKT is connected to the system using 
industry standard 2-pair wiring. 
02 EKT INFORMATION 
02.00.0 Standard Key Functions 
02.00.1 The STRATA EKT has either 14 or 
24 line and feature...

OPERATING PROCEDURES 
. 
SECTION 100-020-400 
JANUARY 1984 
F 
TABLE A 
TELEPHONE TONES 
, 
second off) indicates the CO line placed on 
hold at that EKT. The LEDs of the CO line on 
hold will flash at a medium rate (3/4 second 
on-l/4 second off) at the other stations. 
Hold Recall: 
l A quick flash rate matching the tones (2 IPS 
for 1 second-10 IPS for 1 second) will remind 
a station which line has been on hold for the 
programmed period of time. 
Conference: 
l A very fast flash rate (10 IPS)...

5) Hang up when the call is completed. 
02.122 To receive an incoming call: 
1) You will hear a ringing tone. 
l The CO line LED will flash at the CO 
incoming call rate. 
2) Lift the handset. 
l CO line LED will flash at the l-use rate. 
3) Hang up when the call is completed. 
02.12.3 To make an intercom call: 
1) Lift the handset. 
2) Depress the ( key. 
l You will hear intercom dial tone. 
l INT LED will flash at the l-use rate. 
3) Dial the desired station number. 
l You will hear a single ring...