Toshiba Strata Vie Electronic Key Telephone System User Guide

							~-TOSHIBA-~
LIQUID CRYSTAL DISPLAY (continued)2. On a CO line call, the dis-
play can be forced to change
from Dialed Number to Date/
Time by depressing the 
i(or 
m ) key and then to
the Elaosed Time 
dis&av bv
anothe; depression oi the a/
m key. Repeated i / mkey depressions will then
alternate the display between
Date/Time and Elapsed Time.
D) Elapsed TimeDisplayed during an active in-
(coming or outgoing CO line call.
After a preselected timeout, the
Elapsed Time display will appear
in place of the CO line number
(incoming call) or dialed number
(outgoing call). The time accu-
mulates from the moment the
m key is first depressed. The
maximum call duration regis-
tered is 10 hours.
NOTE:
The display shows Elapsed Timefor 15 sec. after the call is ter-
minated and then changes 
auto-ma 
tically to Date/Time.
E) Calling Number-Displayed during the following
Intercomconditions:
/L-lQl Incoming intercom call when
your station is idle.
l Busy Override when your 
sta-tion is busy.
l Automatic Callback-Intercom.
l Door Phone.
l Call Pick-up.
l DSS key call.
(continued)
36 
						

							TOSHIBA
LIQUID CRYSTAL DlSPlA
F) Conference
7
,Y (continued)
jWhen you set up a two-CO line
conference, both CO line num-
bers will be displayed until thedisplay switches to Elapsed Time.
The Elapsed Time shown will befor the first line in the confer-
ence.
I
G) Automatic Dialing
Programming
HI Automatic
Callback (ACB)
1) Callback
II2) When the call is
answered by the
called party, the
display shifts to
the right.
i
I) Call Forward
I) Call to a forwarded
station.
2) Receive a
forwarded call.Display verifies the data as it is
entered. 
i and 1 or mand 
m keys are displayed
by the # and 
w symbols,
respectively.When a callback rings your
station,the station number
you dialed will be displayed.Called station number and sta-
tion number it was forwarded
to are displayed.
Calling station number, followedby station number called are
displayed.(continued) 
						

							LIQUID CRYSTAL DISPLAY (continued)
J) Recalling StationWhen a transferred call goesunanswered, it will recall to
the station that transferred it.
The display will show the COline number and the station
number to which it was
originally transferred.DATE/TIME ADJUSTMENT
This operation is possible from station 10 only.
1) Handset on-hook.
2) To set date:
a) Dial 
ipafl (or m,m 11).
b) Dial in date (year/month/day) in the format
YYMMDD. Enter a leading 0 for single-digit
month and day.
c) Depress the 1 (or m ) key.
3) To set time:
a) Dial 
1181 (or m=Bi ).b) Dial in time (hour/minute/second) in 24-hour
clock format HHMMSS. Enter a leading 0 for
single digit.c) Depress the 
1 (or m ) key.
3
AtoZ KELLATRONICS, INC.
!:k[:mB:I:I:f:
m@ * *