Toshiba Strata S Electronic Key Telephone System Installation And Maintenance Manual

SYSTEM PROGRAMMING 
SECTION 100-003-3OU ‘. 
JULY 1984 
v.. PROGRAM SXX-STATION CO LINE ACCESS 
X = Select (LED on) Initialized Data: All LEDs on 
PROGRAM 4XX-STATION TYPE and FLEXIBLE KEY ASSIGNMENT (See figure 1) 
X = Select (LED on) Initialized Data: INT LED on; all other LEDs off 
PROGRAM SXX-STATION CLASS OF SERVICE 
KEY/LED FEATURE STATION NUMBERS 
lOtllll2Il3l14l1Sll6Il 
AD4 Privacy Override Allowed 
AD3 DND Overrii Allowed 
co3 SVEnaMd 
co2 
CO1 
INT Microphone Push-am/Push-off 
Auto tin,...

SYSTEM PROGRAMMING 
SECTION 100-003-390 
JULY 1984 
PROGRAM 7XX-STATION OUTGOING CALL RESTRICTION 
KEY/LED FEATU R E STATION NUMBERS 
101112131416161~ 
co3 Restricted 
co2 Restricted 
co 1 Restricted 
X = Select (LED on) Initialized Data: All LEDs off 
PROGRAM 8xX-CO RINGING ASSIGNMENTS-DAY 
KEY/LED FEATURE STATION NUMBERS 
1011121314151617 
co3 Ring in Day 
co2 Ring in Day 
co 1 Ring in Day 
X = Select (LED on) Initialized Data: Station 1 O-all LEDs on; all others off 
I 
PROGRAM SXX-CO RINGING...

SYSTEM PROGRAMMING 
.SECTlON 100-003-300 
J@Y 1994 
. - 
02.60 Initialization 
02.61 Sfwate 
S has a list of standard system 
data assignments stored in ROM that can be 
entered anytime by initializing the system. The 
system must be initialized when it is first installed. 
This will allow the system to be tested and any 
faults to be corrected before time is spent on pro- 
gramming. Standard data assignments are listed 
in Table 2. 
02.62 To initialize the 
Strata S system: 
Make sure the power switch...

TABLE 2 (continued) 
SYSTEM PROGRAMAYING 
SECTlON100-003-300 
JULY 1984 
Toll Restriction Disable-20 Program 
Toll Restriction = All CO lines 
l Ineffective if Program 6XX not utilized. 
Toll Restriction Exception Codes-2X Program 
No Codes Assigned 
STATION OPTIONS 
Station CO Line Access-3XX Program 
Access Allowed = All lines, all stations 
Station Type and Flexible Key Assignment4XX Station Class of Service-%X Program 
Privacy Override = Not allowed all stations 
DND Override = Not allowed all...

SYSTEM PROGRAMMING 
SECTION 100-003-300 
JULY 1994 
TABLE 3 
PROGRAM 01 -SYSTEM ASSIGNMENTS 
1. Lock in SET switch. 
2. Depress the (SPKRI key on station 17. 
3. Dial Iv FJ on dial pad. SET LED on. 
Station 17 MW/FL LED on. 
System is in program mode. 
Normal functions halt on station 17. 
SPKR LED steady on. 
SPKR LED flashes continuously. 
AD, CO & INT LEDs will be on according to 
present data. 
4. Refer to the System Record Sheet. Using 
the m, m and m keys, turn associated 
LEDs on or off, as...

SYSTEM PROGRAMMING 
SECTION 100-003-390 
JULY 1994 
- 
TABLE 4 
PROGRAM 05-AUTOMATIC RECALL FROM HOLD TIMING 
1. Lock in SET switch. Station 17 MW/FL LED on. 
An X on the record sheet means the LED 
should be on. 
Only one LED is permitted to be on, depress- 
. . . or. . . 
66. Transfer data into working memory per 
Paragraph 02.06. SET LED goes off. 
Station 17 MW/FL LED goes off. 
New data is stored, previous data is erased. 
-13-  

TABLE 5 
PROGRAM 06-AUTOMATIC RELEASE ON HOLD ENABLE 
SET LED on. 
1. Lock in SET switch. Station 17 MW/FL LED on. 
System is in program mode. 
Normal functions halt on station 17. 
2. Depress the lSPKR[ key on station 17. 
3. Dial 
q q on dial pad. 
4. Refer to the System Record Sheet. 
Using the m keys, turn the associated 
LEDs on or off, as required. Each CO 
key/LED represents itself-that is, if the CO 1 
LED is on, CO 1 will have the AROH function 
during normal operation. If the CO 1 LED is 
off,...

SYSTEM PROGfWlMlNG 
SECTION 1 OO-G03-300 
JULY 1994 
TABLE 6 
PROGRAM 07-AUTOMATIC RELEASE ON HOLD TIMING 
1. Lock in SET switch. 
2. Depress the 
1 SPKRl key on station 17. 
3. Dial fl m on dial pad. 
4. Refer to the System Record Sheet. 
Using the m keys, turn the associated 
LEDs on or off, as required. Each CO 
key/LED represents itself-that is, if the CO 1 
LED is on, CO 1 will use XB (cross-bar) timing 
for AROH. If the CO 1 LED is off, ESS timing 
will be used on that line. 
5. Depress the /ml key...

SYSTEM PROGIUWMING 
SECTION 199-993-399 
JULY 1994 
v.. 
i 
TABLE 7 
PROGRAM 1 0-PBX BACKUP 
SET LED on. 
1. Lock in SET switch. Station 17 MW/FL LED on. 
System is in program mode. 
Normal functions halt on station 17. 
2. Depress the m key on station 17. 
3. Dial /TJ 
q on dial pad. 
4. Refer to the System Record Sheet. 
Using the m keys, turn the associated 
LEDs on or off, as required. Each CO 
key/LED represents itself-that is, if the CO 1 
LED is on; the system assumes that the CO 1 
line is...

e.. SYSTEM PROGRAMMING 
SECTION 100-003-300 
JULY 1984 
TABLE 8 
PROGRAM 1 X-PBX ACCESS CODES 
W/FL LED on. 
. Lock in SET switch. 
ystem IS In program mode. 
I 
q a (X = 1) to program first 
q (X = 2) to program second 
two digits must be entered.) 
0 If the access code is a single digit, enter 
q as the second digit. 
l If all combinations following a particular 
first digit are to be considered access 
codes (e.g. 91, 92, 93, etc.), depress 
the (DNDI key for the second digit. 
1. Depressing the q key...