Toshiba Strata Dk24, Dk56, Dk96 Instruction Manual

REMOTE ADMIN & MAINT PROCEDURES 
SECTION 200-096-600 
FEBRUARY 1991 
TABLE RM-2 
PROGRAM 60 
SMDR OUTPUT/ACCOUNT CODE DIGIT LENGTH 
iTEP ACTION 
DISPLAY/PRINTOUT 
1 Enter Program Mode 
>MODE PROG 
At the >MODE prompt, enter u a m m 
q P 
2 Enter Program Number 60 P 60 
Press 
q P60 
3 Allow SMDR printout on incoming and outgoing calls. P60 3 1 
Enter: Action code 3. P60 
System will print out “1” if incoming and outgoing calls will be 
printed on SMDR. A “0” will be printed out if only outgoing calls...

REMOTEADMlN&MAlNTPROCEDURES 
SECTION 200-096-600 
FEBRUARY1991 
TABLERM-Zl 
PROGRAM69 
VERIFIABLEACCOUNTCODEENTRY 
I 
iTEP ACTION 
DISPLAY/PRINTOUT 
1 Enter Program Mode >MODE PROG 
At the >MODE prompt, enter i a m H 
q . P 
2 Enter Program Number 69 P 69 
Press 
q . 
P69 
3 Refer to the System Record Sheet, and enter the required code P69 001 Nknnm-N 
number (000 - 299). 
Example: code number 001; Enter: B 10. 
The system will display the present account code number 
assigned to 001. 
Note: 
The number...

REMOTEADMlN&MAlNTPROCEDURES 
SECTION 200-096-600 
FEBRUARY1991 
TABLERM-ZP 
PROGRAM70 
VERlFYACCOUNTCODE/TOLLRESTRlCTlONASSlGNMENT 
STEP ACTION 
DISPLAY/PRINTOUT 
1 Enter Program Mode >MODE PROG 
At the >MODE prompt, enter i 1 H 1 
q . P 
2 Enter Program Number 70 P 70 
Press a. P70 
3 Refer to the System Record Sheet, and enter the required code P70 002 00 
number (000 - 299). 
Example: code number 002; Enter: 111. 
The system will display the present digit Restrict (Y) and Toll 
Restriction Status (Z)...

REMOTEAOMIN &MAlNTPROCEDURES 
SECTlON200-096-600 
FEBRUARY1991 
TABLERM-AA 
PROGRAM78 
CO LINESPECIAL RINGING ASSIGNMENTS-DISA/IMDU/NIGHTRlNGlNG OVER EXTERNAL-PAGE 
;TEP ACTION 
DISPLAY/PRINTOUT 
1 Enter Program Mode 
>MODE PROG 
At the >MODE prompt, enter i 0 m H 
q . P 
2 Enter Program Number 78 P 78 
Press 
q . P78 
3 
Refer to the System Record Sheet and enter the feature number P78 1 
for the feature to be programmed. 
Example: Feature code 1, enter 0 . 
4 Refer to the System Record Sheet and enter...

REMOTEADMIN &MAlNTPROCEDURES 
SECTION 200-096-600 
FEBRUARY1991 
TABLERM-AB 
PROGRAM80 
ELECTRONICTELEPHONERINGINGTONES . 
;TEP ACTION 
DISPLAY/PRINTOUT 
1 Enter Program Mode. 
>MODE PROG 
At the >MODE prompt enter B 0 a B 
q . P 
2 Enter Program Number 80 P 80 
Press 
q P80 
3 
Refer to the System Record Sheet and enter the required P80 01 
port number. 
Example: Port 01, enter ip . 
4 Press E key. 
P80 01# 1 
The system will display 1 or 2 corresponding to tone 1 or tone 2. 
5 Refer to the System...

iTEF 
1 
2 
3 Enter Action Code 1 
4 
5 
REMOTEADMlN&MAlNTPROCEDURES 
SECTION 200-096-600 
FEBRUARY1991 
TABLERM-AC 
PROGRAM93 
CO LINE IDENTIFICATION 
ACTION 
Enter Program Mode 
At the >MODE prompt, enter u m H H q . 
Enter Program Number 93 
Press q . 
Refer to the System Record Sheet and enter the appropriate 
CO line number. 
Example: CO line 2, enter i 1 . 
The system will display previously entered identification 
characters (up to 16 characters). 
Refer to the System Record Sheet and change...

REMOTEADMIN &MAlNTPROCEDURES 
SECTION 200-096-600 
FEBRUARY1991 
TABLERM-AD1 
PROGRAM44(AORB) 
TOLLRESTRlCTlONTRAVELlNGCLASSOVERRlDECODEENTRY . 
STEP ACTION 
DISPLAY/PRINTOUT 
1 Enter Program Mode 
>MODE PROG 
At the >MODE prompt, enter a 0 B a 
q . P 
2 Enter Program Number 44 (Do not enter A or B) P 44 
Press 
q . P44 
3 Refer to the System Record Sheet and enter the required Toll P44 1 NNNN 
Restriction Class number (1 - 4). 
Example: Class 1; Enter: [. 
The system will display the present override...

REMOTEAOMlN&MAlNTPROCEOURES 
SECTION 200-096-600 
FEBRUARY1991 
TABLERM-AE 
PROGRAM45-2 
TOLL RESTRICTION DISABLE 
iTEP ACTION 
DISPLAY/PRINTOUT 
1 Enter the Program Mode 
>MODE PROG 
At the >MODE prompt, enter i 1 H H 
q . P 
2 Enter Program Number 45 P 45 
Press 
q . P45 
3 Enter the number B. P45 2 
4 Refer to the record sheet and enter the required CO line number. 
P45 2 01 N 
Example: CO line 01, enter1 0. The system will display 
N or Y to define if the LED is on or off. 
5 Refer to the System...

REMOTEADMlN&MAlNTPROCEDURES 
SECTION 200-096-600 
FEBRUARY1991 
This page intentionally left blank. 
-34B-  

REMOTEADMIN &MAlNTPROCEDURES 
SECTION 200-096-600 
FEBRUARY1991 
TABLERM-AG 
PROGRAM45-8-9 
TOLLRESTRICTIONOVERRIDECODE 
STEP ACTION 
DISPLAY/PRINTOUT 
1 Enter the Program Mode >MODE PROG 
At the >MODE prompt, enter i 1 w @ 
q . P 
2 Enter the Program Number 45 P 45 
Press 
q . P45 
3 Refer to the System Record Sheet and enter 1 or 1 for the P45 8 NNNN 
desired code number. The system will display the present 
override code number. 
4 Refer to the record sheet and enter a new number if required. P45 8...