Toshiba Perception Electronic Business Communications System Installation And Maintenance Manual

TABLE of CONTENTS ......................................... i 
GENERAL .................................................. 
Summary Description ...................................... 
ES ................................ 
STANDARD TELEPHONE OPERATION ........................... 
General information ........................................ 
Making Calls .............................................. 
l-folding Calls .............................................. 
Consultation Call...

I? 
Conferencing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 
Privacy Release . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 
Camp-onCalls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 
Call Waiting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 
Automatic Callback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

SerialCall ................................................ 
Exclusion Keys (Splitting) ................................... 
Verify .................................................... 
Paging ................................................... 
Meet-mePage ............................................ 
Attendant Conference ...................................... 
Overflow ................................................. 
.loin Key .................................................. 
Position Busy...

employs stored pro- 
gram control, digital svvitching and custom LSI 
circuitry. 
Utilizing the same electronic key 
telephone as the latest Toshiba 
tronic Key Telephone systems, 
combines the functions of conventional private 
branch exchange (EPA X) systems and elec- 
tronic key telephone systems (EKTS) into a sin- 
gle design while remaining compatible with 
existing switching and station equipment. has a capacity of 120 
e system provides a 
wide variety of basic and optional features to 
users of...

r 
02. Dial tone must be heard before se- 
lect 
particular feature. If you have just lifted 
the handset, you will hear dial tone. If you are 
engaged in a conversation, however, you must 
obtain “Recall Dial Tone” before activating an- 
other feature, such as transfer, etc. 
During a conversation, Recall Dial 
Tone is obtained by “flashing” the hookswitch 
(plunger) located in the cradle that holds your 
handset. To flash, momentarily depress the hook- 
svvitch (for about X second). In response, you...

the original call. 
2. To return to the originalcallafteraccess- 
ing a trunk, flash the hookswitch t 
.“I It is possible to add a third party to an 
existing two-party conversation, and the added 
party can be on either a station or an outside line. 
Any of the three parties may disconnect at any- 
time, leaving the remaining two parties con- 
nected. (The system will refuse to connect certain 
types of trunk lines.) 
To initiate a conference: 
the hookswitch. 
riginal connection on hol 
You will hear...

(x2.1 7.Q 
(X2.1 7.1 If you attempt to call another station or 
access a trunk and receive a busy tone, you can 
request to be signalled when the desired station or 
trunk is idle. You may continue to use your tefe- 
phone in the usual manner while awaiting a 
callback. 
Q2.17. To activate Automatic Callback: 
1) Flash the hookswitch. 
2) Dial 
q a. 
You will hear recall dia 
3) Hang up and wait for callba 
call. I tone. 
ck, or dial another 
.‘t 7.3 When the desired connection becomes 
idle your...

2) Dial am. 
You will be connected to the incoming 
call. 
3) Speak to the caller 
4) Use Call Transfer to connect the call with the 
desired station. 
Q2.22.Q 
Q2.22.1 To page: 
I) Obtain dial tone. 
2) Dial the access code (see below) for the 
desired zone. 
ZONE 1 
ZONE 2 
ZONE 3 
ZONE 4 
ZONE 5 
ALL ZONE (location) 
3) Speak slowly and distinctly, and repeat your 
message. 
.23. eet- 
This feature will automatically connect 
you to a call that has been “parked” for you by the 
operator. If you are...

2) Dial mp[. 
The system will automatically redial the 
number. 
0 Executive Override allows you to enter 
an established conversation. The original parties 
receive a warning tone prior to you being con- 
ferenced. 
To override a busy station: 
1) After reaching the busy line, flash the hook- 
switch. 
Busy tone changes to recall dial tone. 
2) Dial 
q m. 
A warning tone is given to the existing 
connection. 
A 3-way conference now exists (any one 
of the parties can leave the conference 
and the other...