Home > Toshiba > Copier > Toshiba Estudio 162 Owners Manual

Toshiba Estudio 162 Owners Manual

Here you can view all the pages of manual Toshiba Estudio 162 Owners Manual. The Toshiba manuals for Copier are available online for free. You can easily download all the documents as PDF.

Overview View all the pages Comments

Page 101

e-STUDIO162/162D/151/151D  TEST COMMAND, TROUBLE CODES  10 - 32 66 03 FAX PWB memory check 
(Executable only when the 
FAX is installed.)[Function]
Use to check the FAX PWB memory.
[Operation]
04 Signal send mode (Max. 
value) (Executable only 
when the FAX is installed.)[Function]
Use to set the signal send mode (Max. value).
Facsimile test command design specifications.
[Operation] Main 
codeSub 
codeContents Details of function/operation
1) Initial display
2) [
←/→] or after 2sec
Every time when [
→]...

Page 102

e-STUDIO162/162D/151/151D  TEST COMMAND, TROUBLE CODES  10 - 33 66 05 Signal send mode (Soft SW 
set value) (Executable only 
when the FAX is installed.)[Function]
Use to set the signal send mode (Soft SW set value).
Facsimile test command design specifications.
[Operation]
07 Image memory content print 
(Executable only when the 
FAX is installed.)[Function]
Use to print the image memory content.
[Operation]
10 Image memory content clear 
(Executable only when the 
FAX is installed.)[Function]
Use to...

Page 103

e-STUDIO162/162D/151/151D  TEST COMMAND, TROUBLE CODES  10 - 34 66 11 300bps signal send (Max. 
value) (Executable only 
when the FAX is installed.)[Function]
Use to set the 300bps signal send (Max. value).
1: NO SIGNAL
2: 11111
3: 11110
4: 00000
5: 010101
6: 00001
[Operation]
12 300bps signal send (Soft 
SW set value) (Executable 
only when the FAX is 
installed.)[Function]
Use to set the 300bps signal send (Soft SW set value).
1: NO SIGNAL
2: 11111
3: 11110
4: 00000
5: 010101
6: 00001
[Operation] Main...

Page 104

e-STUDIO162/162D/151/151D  TEST COMMAND, TROUBLE CODES  10 - 35 66 13 Dial test (Executable only 
when the FAX is installed.)[Function]
Use to the dial test.
[Operation]
17 DTMF signal send (Max. 
value) (Executable only 
when the FAX is installed.)[Function]
Use to set the DTMF signal send (Max. value).
[Operation] Main 
codeSub 
codeContents Details of function/operation
 Dial test (PULSE)
1) Initial display
∗[CLEAR] key: FAX control is termi-
nated.
2) Select 1
3) Enter the make time in 2 digits....

Page 105

e-STUDIO162/162D/151/151D  TEST COMMAND, TROUBLE CODES  10 - 36 66 18 DTMF signal send (Soft SW 
set value) (Executable only 
when the FAX is installed.)[Function]
Use to set the DTMF signal send (Soft SW set value).
[Operation]
21 FAX information print 
(Executable only when the 
FAX is installed.)[Function]
Use to print the FAX information.
[Operation]
24 FAST SRAM clear 
(Executable only when the 
FAX is installed.)[Function]
Use to clear the FAST SRAM.
[Operation]
30 TEL/LIU status change 
check...

Page 106

e-STUDIO162/162D/151/151D  TEST COMMAND, TROUBLE CODES  10 - 37 66 32 Receive data check 
(Executable only when the 
FAX is installed.)[Function]
Use to check the receive data.
[Operation]
33 Signal detection check 
(Executable only when the 
FAX is installed.)[Function]
Use to check the signal detection.
[Operation]
34 Communication time 
measurement (Executable 
only when the FAX is 
installed.)[Function]
Use to measurement the communication time.
[Operation]
37 Speaker sound volume 
setting...

Page 107

e-STUDIO162/162D/151/151D  TEST COMMAND, TROUBLE CODES  10 - 38 66 38 Time setting/check 
(Executable only when the 
FAX is installed.)[Function]
Use to check the time setting.
[Operation]
41 CI signal check (Executable 
only when the FAX is 
installed.)[Function]
Use to check the CI signal.
When CI signal is detected, OFF 
→ ON.
[Operation] Main 
codeSub 
codeContents Details of function/operation
1) Initial display
∗[CLEAR] key: FAX control is terminated.
2) Select 1
xxxx.xx.xx(xxx) is the current...

Page 108

e-STUDIO162/162D/151/151D  TEST COMMAND, TROUBLE CODES  10 - 39
5. Trouble codes
A. Trouble codes list
B. Details of trouble codes
Main 
codeSub 
codeDetails of trouble
E1 00 IMC communication trouble
10 IMC trouble
13 IMC flash ROM error
16 IMC DIMM memory read/write check error
81 IMC communication interface error (parity)
82 IMC communication interface error (Overrun)
84 IMC communication interface error (Framing)
E7 02 LSU trouble
10 Shading trouble (Black correction)
11 Shading trouble (White...

Page 109

e-STUDIO162/162D/151/151D  TEST COMMAND, TROUBLE CODES  10 - 40 E7 11 Content Shading trouble (White correction)
Detail The CCD white scan level is abnormal when the 
shading.
Cause Improper connection of the CCD unit flat cable
Dirt on the mirror, the lens, and the reference 
white plate
Copy lamp lighting abnormality
CCD unit abnormality
MCU PWB abnormality
(When occurred in the ADF scan position.)
Improper installation of the mirror unit
Check 
and 
remedyClean the mirror, lens, and the reference...

Page 110

e-STUDIO162/162D/151/151D  TEST COMMAND, TROUBLE CODES  10 - 41 L1 00 Content Feeding is not completed within the specified 
time after starting feeding. (The scan head 
locking switch is locked)
Detail The white area and the black marking on the 
shading plate are used to obtain the difference 
in the CCD level values for judgment of lock. 
When the difference in the levels of which and 
black is small, it is judged that the black mark 
could not be scanned by lock and the trouble 
code “L1” is...

Start reading Toshiba Estudio 162 Owners Manual
All Toshiba manuals