Toshiba E740 Pocket Pc Instructions Manual

							  Wi-Fi (IEEE 802.11b) WLAN Adaptor 
Users Manual 8-12 
TOSHIBA Pocket PC e740 Version   1   Last Saved on 10/05/2002 21:02 
ENGLISH using  Euro_C.dot –– Printed on 10/05/2002 as PDA3_UK 
TMU-Traffic Monitoring Utility 
TMU keeps users updated of current WLAN Module’s activity status. 
Icon Specification 
  Wireless Communication Switch off:  
The Wireless Communication Switch, on the bottom of the PDA, is turned 
off. Clicking on the icon  gives you a warning message, “Please turn on 
Wireless Communication Switch”. Click “OK” to close the Message Box. 
Turn on the switch and you will see the icon 
 turns to  or , depends 
on the original setting for the WLAN Module Power. 
  
						

							  Wi-Fi (IEEE 802.11b) WLAN Adaptor 
Users Manual 8-13 
TOSHIBA Pocket PC e740 Version   1   Last Saved on 10/05/2002 21:02 
ENGLISH using  Euro_C.dot –– Printed on 10/05/2002 as PDA3_UK 
  Wireless LAN Power off: 
The WLAN Module is at Power Off Status. Clicking on the icon  
displays you 2 icons, “On” and “Off”. Click “On” to turn on the Wireless 
LAN Module, and then the icon 
 turns to . Click “Off” to exit without 
turning on the Wireless LAN Module. 
  
						

							  Wi-Fi (IEEE 802.11b) WLAN Adaptor 
Users Manual 8-14 
TOSHIBA Pocket PC e740 Version   1   Last Saved on 10/05/2002 21:02 
ENGLISH using  Euro_C.dot –– Printed on 10/05/2002 as PDA3_UK 
  Wireless LAN Power on: 
The WLAN Module is at Power On Status. Clicking on the icon  
displays you 2 icons, “On” and “Off”. Click “Off” to turn off the Wireless 
LAN Module, and then the icon 
 turns to . Click “On” to exit without 
turning off the Wireless LAN Module. To save power, the WLAN module 
can automatically switches power off after a period of inactivity (
 turns 
to 
). 
 
  
						

							 Bluetooth Settings Help 
Users Manual 9-1 
TOSHIBA Pocket PC e740 Version   1   Last Saved on 10/05/2002 21:02 
ENGLISH using  Euro_C.dot –– Printed on 10/05/2002 as PDA3_UK 
Chapter 9 
Bluetooth Settings Help 
If your Pocket PC e740 is equipped with a Bluetooth adaptor, you can 
wirelessly connect to a Bluetooth-enabled computer or modem. 
Bluetooth Settings 
You can select the desired User Mode, Security Mode and other settings 
for use when connecting to other Bluetooth devices. 
■ Tap Bluetooth Settings on the command bar below the Today 
window to display the Bluetooth icon. Tap the Bluetooth icon to 
display the Bluetooth Settings screen. 
User Mode 
The User Mode can be used to control the information shared when 
connected to other Bluetooth devices. Select the desired User Mode to 
enable the corresponding settings. 
1 Tap Settings on the Bluetooth Settings screen, and then select 
Change User Mode from the Settings menu. 
2 Check the box of the desired User Mode on the Change User Mode 
screen. 
3 Tap OK to return to the Settings menu. 
You can also change the User Mode directly from the Bluetooth 
Settings screen. 
 
TOSHIBA Pocket PC e740 
 Users Manual 9-1  
						

							 Bluetooth Settings Help 
Users Manual 9-2 
TOSHIBA Pocket PC e740 Version   1   Last Saved on 10/05/2002 21:02 
ENGLISH using  Euro_C.dot –– Printed on 10/05/2002 as PDA3_UK 
Specifications 
By enabling the Bluetooth device on your Toshiba Pocket PC, you will be 
able to wirelessly communicate with Bluetooth-enabled PCs, modems 
and other peripherals, and chat with other Toshiba Pocket PCs. The 
Toshiba Pocket PC supports following Bluetooth services: 
■ COM (Serial Port Service) 
This service allows you to use a serial port to connect to a PC in order 
to send and receive data. COM service is also used when connecting 
to a PC with ActiveSync. 
■ DUN (Dial-up Networking Service) 
This service allows you to use the Dial-up Networking connection with 
connecting through a modem. 
Profiles supported by 
Toshiba Pocket PC Serial Port Profile (V1.1); Dial-up Networking 
Profile (V1.1) 
Bluetooth 
specification V1.1 (Not conforming to V1.0B).  
■ The connection speed of Bluetooth varies depending on the location 
and orientation of the Pocket PC, the communication range, the 
operating environment, the performance of the other party’s device, 
and other factors. 
■ Because the Bluetooth software uses COM4, it cannot be used with 
other devices or applications using COM4. 
■ The Bluetooth software can connect to only one remote device at a 
time. This is a limitation of software. 
■ Please refer to the Toshiba Pocket PC Web site for information on 
specifications and connectable devices: http://www.pda.toshiba.com  
						

							 Bluetooth Settings Help 
Users Manual 9-3 
TOSHIBA Pocket PC e740 Version   1   Last Saved on 10/05/2002 21:02 
ENGLISH using  Euro_C.dot –– Printed on 10/05/2002 as PDA3_UK 
Setup 
Setting Up Your Toshiba Pocket PC 
This procedure for setting up is not required usually. This procedure 
describes for your software upgrade. You need to get the newest 
software, before performing this operation. 
Disable the Bluetooth™ device in your Toshiba Pocket PC and stop all 
applications, before installing the Bluetooth™ software. 
1 Connect your Toshiba Pocket PC to your computer with ActiveSync, 
using the cradle or connection cable. 
2 With Explorer or another application, open the specified folder and 
double-click on the setup.exe file. 
3 Follow the instructions on the screen. 
Install this software only under default folder. 
4 After installing the program to your Toshiba Pocket PC, follow the 
instructions on the reset confirmation screen. 
After resetting your Toshiba Pocket PC, you will be able to use the 
Bluetooth Settings program. 
Enabling Bluetooth™ on Your Toshiba Pocket PC 
1 Enable Bluetooth™ on the Toshiba Pocket PC by turning on the 
Wireless Communication Switch.The Bluetooth Settings screen will 
appear. The Bluetooth Settings screen will also appear when the 
power is turned on using one of the program buttons. 
You cannot use more than two Bluetooth™ devices at a time,If 
CompactFlash communication card, such as a modem, Bluetooth or LAN 
card, are set at the same time, it may affect the communications performance of the local Bluetooth™ device. If this occurs, remove 
CompactFlash card from the slot before using Bluetooth™ .Each 
Bluetooth™ device has a unique device address (shown on the card as BDA:XX...X) that is used when communicating with other Bluetooth™ 
devices. If you use different Bluetooth™ devices (such as SD card type 
Bluetooth™ device) in your Toshiba Pocket PC, Bluetooth™ may not work. If this occurs, try again after one of following steps. Delete all 
remote devices from the remote device list displayed on your Toshiba 
Pocket PC. On a device you are trying to connect, delete the information 
corresponding to your Toshiba Pocket PC. 
  
						

							 Bluetooth Settings Help 
Users Manual 9-4 
TOSHIBA Pocket PC e740 Version   1   Last Saved on 10/05/2002 21:02 
ENGLISH using  Euro_C.dot –– Printed on 10/05/2002 as PDA3_UK 
Bluetooth™ Connection 
Once Bluetooth™ is connected, your Toshiba Pocket PC is called as 
“local device” while another device is called as “remote device”.  
To establish Bluetooth™ connection 
Follow the procedure below to establish a Bluetooth™ connection. 
 Detect other devices (remote devices) 
Search for connectable service 
Select connection service 
Establish connection 
Authentication screen is displayed 
Operation 2, 3, 4
Operation 5
Operation 9
Operation 10
Operation 6, 7, 8
 
After starting the Bluetooth Settings program, a Bluetooth icon will appear 
on the command bar at the bottom of Today screen. Tap this icon to launch Bluetooth Settings screen. 
When the Bluetooth icon was lost from the Programs menu, it can be 
recovered automatically. Please execute the  \windows\bt_rescue.exe file 
in File Explorer. 
 
  
						

							 Bluetooth Settings Help 
Users Manual 9-5 
TOSHIBA Pocket PC e740 Version   1   Last Saved on 10/05/2002 21:02 
ENGLISH using  Euro_C.dot –– Printed on 10/05/2002 as PDA3_UK 
1 Tap Start, Programs, and then Bluetooth Setup to display the 
Bluetooth Settings screen. 
Tap Remote Device to display the Remote Device List screen with a 
list of the other devices. 
No device will appear on the remote device list when using this 
program for the first time or after initializing your Toshiba Pocket PC. 
Once you have used this program to connect to a remote device, the 
information for the previously connected device will be displayed in 
the remote device list. 
  
						

							 Bluetooth Settings Help 
Users Manual 9-6 
TOSHIBA Pocket PC e740 Version   1   Last Saved on 10/05/2002 21:02 
ENGLISH using  Euro_C.dot –– Printed on 10/05/2002 as PDA3_UK 
2 Tap Remote Device Search on the Tools menu. 
The Remote Device Search screen will appear. 
It may take several minutes to complete the remote device search. 
Once the search is completed, the remote device list will be updated 
with the latest remote device information. 
 
3 Tap and hold to display the properties of the remote devices in a pull- 
down menu. Tapping on the property name of a remote device 
categorizes device information by the name. 
 
A “ghost” is displayed for devices that have been discovered before 
but are no longer discovered.  
						

							 Bluetooth Settings Help 
Users Manual 9-7 
TOSHIBA Pocket PC e740 Version   1   Last Saved on 10/05/2002 21:02 
ENGLISH using  Euro_C.dot –– Printed on 10/05/2002 as PDA3_UK 
 
The device addresses are displayed for devices that did not respond 
to the remote device name search. 
 
 Connected icon  
 Unconnected icon  
 “Ghost” icon  
You can reduce the time to search for remote devices by disabling the 
device name search function. Tap Search Options on the Tools menu, 
and select Disable Device Name Search. Device addresses will only be 
displayed on the remote device list.