TiE Onyx 2, 3, 4, 5 Service And Programming Manual

Q- SYSTEM WIDE 
QZ-  SETUP,  PRINTOUT ALL THE TIME
Description
Sole:
Related
Programming
l
l
Feature Reference
Use this option to determine  the SMDR report automatically prints. If
you enable this option (Y). 
 prints as soon as each call  The
system 
 a separate record for each call. Additionally. the  does
not store the call record in the 
 buffer. If you disable this  (N).
the 
 record prints:
 At a preset time (set in QZ- SMDR Report Start Hour). The SMDR report
includes all calls 
 in the SMDR...

Q- SYSTEM WIDE 
 SMDR SETUP. SMDR PRINTOUT ALL THE TIME
Instructions
To enter data on the PRF:
Step  lFor QZ- SMDR   the Time on Table 10. enter Y or N.
To enter data at the programming terminal:
Step 1 After  QZ- Inbound  you see: SMDR PRINTOUT ALL THE
TIME?
Step 
 For QZ- SMDR Printout  the Time on Table 10. enter Y or N.To disable   Reporr. enter  for this option and 00 for QZ-  Start
Hour.
Step  l If you enter Y.  return to the Main Menu.
OR
oIf you enter N. you go to QZ- SMDR Report Start Hour on...

Q- SYSTEM WIDE PROGRAMMING
  SETUP.  REPORT START HOUR
Description
Related
Programming
Feature Reference
Instructions
Step 1 
Step  
Step 
Use this option to specify when the SMDR report should print. The SMDR
buffer clears after the report 
 You can use this option only if you
  for QZ-  Printout All the Time. The choices are 
where    and  I :00 PM. To disable the SMDR printout, enter
00.
Conditions
None
Default 
00  report  not print)
Station 
 Detail Recording
P- Print 
 Report  Print the SMDR...

Q-   
QZ-    REPORT   

R- ERROR LOG REPORT
Description
Use this option to  the   Error Report. This report shows:
 The last time  cleared the System Error Report (using the V-Clear
Error Log option)
 Total number   resets (since  last cleared the report). Power
resets occur 
 you turn the  off and on or if commercial AC
 fails.
 Total number of error resets (since  last cleared the report). Error resets
occur if the 
 initiates a non-stoppable system reset. This occurs if the
CPU detects a serious error.
 The time and date of...

R- ERROR LOG REPORT
Related
Programming
None
Feature Reference
System Reports. Diagnostics and Maintenance Utilities
Instructions
To 
enter data on the PRF:
Step  No entry required.
To enter data at the programming terminal:
Step  lType  The error lop displays.
 SOFTWARE  Issue 1-O 

S- SPEED 
SL- LIST EXTENSION   SPEED  NUMBERS
Description
Use this option to list the extension and system Speed Dial numbers. Refer to
the Speed Dial feature for more information.
 are  Extension
Speed Dial and System Speed Dial listings.
 Estension Speed Dial Listing
EXT # 300 ANNA
SPEED DIAL # 20  BRUCE
EXT # 304BRUCE
SPEED DIAL  50  MARY
SPEED DIAL # 51  HOME
SPEED DIAL # 52  PARTS PLUS
SPEED DIAL # 20 
For example...
  indicates Intercom function
 indicates outside number 888-2345 will dial on trunk...

S- SPEED 
 LIST EXTENSION AND  SPEED  NUMBERS
Instructions
Step 1 
Step I 
Step  
Step 3 l
Step  l
Step  l
Step 1 l
Step  
Step 3 l
Step  l
Step  l
To enter data on the PRF:
Refer to Tables 
 and  for a listing of Extension and System Speed Dial
numbers.
To list Extension (Personal) Speed Dial numbers
Type S. You see: 
Type  You see:  OR 
Type E. You see: FROM
 Enter the extension number you  to begin the listing and press
RETURN. You see: TO Go to step 5.
OR
l Press RETURN to have the  all extensions....

S- SPEED 
SP-   SPEED DIAL NUMBERS
Description
Related
Programming
Feature Reference
Instructions
Step 1 
Step 1 l
Step  
Step 3 
Step 
Use this option to enter  and Extension (Personal) Speed Dial numbers
into the system. For each Speed Dial bin. you must enter:
 The trunk (e.g..SO  ) or trunk group  the stored number should dial
out on. For an Intercom feature. enter I.
 The telephone number or feature code (up to 32 digits). Valid entries are
the digits O-9 and 
 For a pause. enter P.
 The name...

SP-     NUMBERS
Instructions
Step  l
Step 
Step 7 
Step 8 
Step 9 l
Step  l
Step  l
Step 3 
Step  
Step 5 
Press RETURN to program Speed Dial bin 50 for the extension  select.
The existing Speed Dial number displays (or 
OPEN if  programmed),
followed by: 
LINE
If you are programming a DSS Console. press RETURN for bin 01.  program
bins designated for Speed Dial in 
OR
Enter another Speed Dial bin (5 l-59, 20-29) and press RETURN. The
existing Speed Dial number displays (or 
OPEN if none programmed),...