Home
>
Triad
>
Telephone
>
Starplus Triad Xts Installation Digital Key Telephone System Instructions Guide
Starplus Triad Xts Installation Digital Key Telephone System Instructions Guide
Here you can view all the pages of manual Starplus Triad Xts Installation Digital Key Telephone System Instructions Guide. The Triad manuals for Telephone are available online for free. You can easily download all the documents as PDF.
Page 451
Programming LCR TablesB-13 Appendix B - Least Cost Routing EXAMPLE--If a call is placed at 5:45 pm on a Monday, then according to the Daily Start Time Table (using default values) the entry for time period two of the weekly schedule is checked. Because it is Monday the entry for time period two on Monday is used and the result is that the Time Period Route List number two (again using default values) is used for all routes. Thus, the call is routed according to the entries in Time Period Two Route List...
Page 452
B-14Programming LCR Tables Appendix B - Least Cost Routing LCR Routing for Toll Information Description The LCR Routing for Toll Information feature adds provisions to the LCR call processing which allows common call routing for all toll information calls. 1-(XXX) 555-1212, (XXX) 555-1212, 1-555-1212, and 555-1212 calls are intercepted and sent to a selected route in the Route List Table. Numbers dialed are integrated and if it is determined to be a toll information call, either preceded with an area...
Page 453
Programming LCR TablesB-15 Appendix B - Least Cost Routing 3. Press HOLD to save the entry. A confirmation tone sounds. DEFAULT…LCR Call Progress feature is enabled. Default LCR Database Description In an effort to decrease installation and set up time usually associated with LCR, a default LCR database was incorporated. The default LCR database provides basic routing for local and long distance dialing. Default entries have been made in the 3-Digit Table for local office codes (NNXs) and all area codes...
Page 454
B-16Programming LCR Tables Appendix B - Least Cost Routing 4. Press the FORCE LCR flexible button(FLASH 50, Page A, Button #11). The following message displays: 5. Enter a 0 or 1 on the dial pad to enable/disable this feature. [0] = Disabled [1] = Enabled 6. Press HOLD to save the entry. A confirmation tone sounds. LC R C l a s s o f Se r v i c e ( C O S ) Description Stations can be given a class of service assignment for Least Cost Routing. The range is between 0-6, with 0 being unrestricted and 6 the...
Page 455
Programming LCR TablesB-17 Appendix B - Least Cost Routing 6. Enter a valid number (0–6) to correspond to the LCR Class of Service desired. 7. Press HOLD to save the entry. A confirmation tone sounds and the display updates. Enable / Disable Least Cost Routing Description To use Least Cost Routing, it must be enabled. Before enabling LCR, refer to the Least Cost Routing programming tables. After the tables are programmed, you may then enable LCR for the system. After system initialization, a default LCR...
Page 456
B-18Programming LCR Tables Appendix B - Least Cost Routing 3. Press HOLD to save the entry. A confirmation tone sounds. DEFAULT…Call Cost Display is disabled. Conditions »The user must have LCR enabled to get the Call Cost Display. Initialize LCR Tables Description The LCR Tables may be initialized to set all tables to their original, default values. The following tables are reset to their original default value after initialization of the LCR Tables: Programming Steps 1. Press the LCR TABLES flexible...
Page 457
Programming LCR TablesB-19 Appendix B - Least Cost Routing Print LCR Tables Description The Print LCR Tables command dumps the entire database as a permanent record which can serve as a hardcopy of the database. The system baud rate must match that of the printer or receiving device. When printing information from the LCR Tables, the following data prints (examples follow programming steps):
Page 458
B-20Programming LCR Tables Appendix B - Least Cost Routing LCR Printout EXCEPTION CODE TABLE ----------------------DIGIT INS/DEL TABLE ----------------------- CODE ROUTE NO ----------------------TABLE DIGITS ---------------------- ROUTE LIST TABLE ----------------------0 1PRE PREP RT TIME COST CO GRP INS/DEL GRP PR 2 PRE P 01 2 3 4026 026 026 0261 1 1 10 0 0 01 1 1 13 4 5 6PRE PRE PRE PREP P P P 11 2 3 4000 000 000 0001 1 1 10 0 0 01 1 1 17 8 9 10PRE PRE PRE PREP P P P 21 2 3 4010 010 010 0101 1 1 10 0...
Page 459
Programming LCR TablesB-21 Appendix B - Least Cost Routing 3 DIGIT TABLE ---------------------- CODE LEADING 1 NON-LEADING 1 RR PP 6 RR PP 6 --------------------------------- 11 ## ## N 6 ## N 200 0 11 N 1 7 N 201 0 11 N 1 7 N 202 0 11 N 1 7 N 203 0 11 N 1 7 N 204 3 11 N 1 7 N 205 0 11 N 1 7 N 206 0 11 N 1 7 N 207 0 11 N 1 7 N 208 0 11 N 1 7 N 209 0 11 N 1 7 N 210 0 11 N 1 7 N 211 ## ## N 1 7 N 212 0 11 N 1 7 N 213 0 11 N 1 7 N 214 0 11 N 1 7 N 215 0 11 N 1 7 N 216 0 11 N 1 7 N 217 0 11 N 1 7 N 218 0 11...
Page 460
B-22Programming LCR Tables Appendix B - Least Cost Routing 328 0 11 N 1 7 N 329 0 11 N 1 7 N 330 0 11 N 1 7 N 331 0 11 N 1 7 N 332 0 11 N 1 7 N 333 0 11 N 1 7 N 334 0 11 N 1 7 N 335 0 11 N 1 7 N 336 0 11 N 1 7 N 337 0 11 N 1 7 N 338 0 11 N 1 7 N 339 0 11 N 1 7 N 340 0 11 N 1 7 N 341 0 11 N 1 7 N 342 0 11 N 1 7 N 343 0 11 N 1 7 N 344 0 11 N 1 7 N 345 0 11 N 1 7 N 346 0 11 N 1 7 N 347 0 11 N 1 7 N 348 0 11 N 1 7 N 349 0 11 N 1 7 N 350 0 11 N 1 7 N 351 0 11 N 1 7 N 352 0 11 N 1 7 N 353 0 11 N 1 7 N 354 0 11...