Starplus Triad Xts Installation Digital Key Telephone System Instructions Guide

ICLID ProgrammingA-7
Appendix A - ICLID / Caller ID
Local Name Translation
Description
An administrable table provides a local translation from a received calling number to a name.
This table can be administered by the customer from the attendant console location. In cases
of conflict between the name delivered from the CO and that in the local translation table,
the local translation table shall rule. 200 entries are provided.
ICLID Programming
Description
TheXTSsystem provides ICLID input on the...

A-8ICLID Programming
Appendix A - ICLID / Caller ID
Enable / Disable
Description
The ICLID (Incoming Calling Line IDentification) feature was added to theXTSsystem. These
features are unavailable unless the Basic ICLID Software package was purchased separately.
For this feature to operate properly, it must be activated from the Central Office so the
numbers of the calling party are delivered over the individual tip and ring of the CO lines
during the first silent interval between ringing.
Programming...

ICLID ProgrammingA-9
Appendix A - ICLID / Caller ID
Port Assignment
Programming Steps
1. Press the PORT flexible button(FLASH 56, Button #4)tospecifywhichporttousefor
ICLID information.
2. Enter a valid number for one of the ICLID Ports:
[1] = Port # 1 MPB On-Board RS-232C
[3] = Port # 3 Serial Interface Unit (SIU)
[4] = Port #4 Serial Interface Unit (SIU)
[5] = Port #5 UART on MPB2
(LCD displays current baud rate assigned to the ICLID Port number.)
3. Press HOLD to accept the data. A confirmation tone...

A-10ICLID Programming
Appendix A - ICLID / Caller ID
Ring Delay Timer
Description
The Ring Delay timer was added to theXTSto accommodate ICLID interface requirements.
The Ring Delay timer is started whenever a CO Line detects incoming ringing. When the timer
expires, CO line ringing is detected by digital telephones and SLTs.
The purpose of this timer is to wait until after the first ring cycle to be detected by the digital
system so the ICLID information is passed down the CO line prior to being...

ICLID ProgrammingA-11
Appendix A - ICLID / Caller ID
Initialize ICLID-DID Tables
Description
ICLID Table parameters may be initialized, setting all data fields to their original default
values.
Programming Steps
1. Press the ICLID-DID TABLES flexible button (FLASH 80, Button #8). The following
message displays:
2. Press the HOLD button. A confirmation tone sounds.
Table A-1: ICLID-DID Table Defaults
Program
CodeFlexible
ButtonFeaturesDefault Value
(after initialization)
FLASH 43 ICLID-DID TABLES
1 ICLID...

A-12ICLID Programming
Appendix A - ICLID / Caller ID
Print ICLID - DID Tables
Description
The Print ICLID-DID Tables command dumps the entire database as a permanent record
which can serve as a hardcopy of the database. The system baud rate must match that of the
printer or receiving device. When printing the ICLID-DID Table(s), the following data prints
(an example follows the programming steps):

ICLID ProgrammingA-13
Appendix A - ICLID / Caller ID
Figure A-2: ICLID Translation Tables Printout
ICLID NAME BAUD PORT ICLID UNANSWERED CALL TABLE
---------------------------
N Y 9600 1 NONE
ICLID TRANSLATION TABLE ICLID ANSWERED CALL TABLE
----------------------- ---------------------------
NONE
ENTRY ROUTE NAME NUMBER ROUTE RING ASSIGNMENTS
600 ### . ----------------------
601 ### . 00
602 ### . NONE
603 ### .
604 ### . 01
605 ### . NONE
606 ### .
607 ### . 02
608 ### . NONE
609 ### .
610 ### . 03
611...

A-14ICLID Programming
Appendix A - ICLID / Caller ID
13 106
NONE 106A
14 107
NONE 107A
15 108
NONE 108A
16 109
NONE 109A
17 110
NONE 110A
18 ...
NONE ...
19 130
NONE 130A
20 ...
NONE ...
21 150
NONE 150A
... and so on through 99 ...
...
100
100A 170
170A
101
101A ...
...
102
102A 190
190A
103
103A ...
...
104
104A 210
210A
105
105A ... and so on through 252
Figure A-2: ICLID Translation Tables Printout 

ICLID ProgrammingA-15
Appendix A - ICLID / Caller ID
Figure A-3: DID Translation Tables Printout
DID TRANSLATION TABLE 062 162 0000062
063 163 0000063
ENTRY ROUTE NUMBER NAME 064 164 0000064
000 100 0000000 065 165 0000065
001 101 0000001 066 166 0000066
002 102 0000002 067 167 0000067
003 103 0000003 068 168 0000068
004 104 0000004 069 169 0000069
005 105 0000005 070 170 0000070
006 106 0000006 071 171 0000071
007 107 0000007 072 172 0000072
008 108 0000008 073 173 0000073
009 109 0000009 074 174...

A-16ICLID Programming
Appendix A - ICLID / Caller ID
127 127 0000127 188 188 0000188
128 128 0000128 189 189 0000189
129 129 0000129 190 190 0000190
130 130 0000130 191 191 0000191
131 131 0000131 192 192 0000192
132 132 0000132 193 193 0000193
133 133 0000133 194 194 0000194
134 134 0000134 195 195 0000195
135 135 0000135 196 196 0000196
136 136 0000136 197 197 0000197
137 137 0000137 198 198 0000198
138 138 0000138 199 199 0000199
139 139 0000139 200 100 0000200
140 140 0000140 201 101 0000201
141 141...