Sony Vpl Csx6 Projector User Manual
Here you can view all the pages of manual Sony Vpl Csx6 Projector User Manual. The Sony manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 41
41 GBMaintenance Maintenance BMaintenance Maintenance Replace the lamp with a new one in the following case. When the lamp has burnt out or dims “Please replace the LAMP.” appears on the screen The LAMP/COVER indicator lights up The lamp life varies depending on conditions of use. Use LMP-C150 Projector Lamp as the replacement lamp. When replacing the lamp after using the projector Turn off the projector, then unplug the power cord. Wait for at least an hour for the lamp to cool. The lamp...
Page 42
GB 42Maintenance 4Insert the new lamp all the way in until it is securely in place. Tighten the screws. Fold the handle. Be careful not to touch the glass surface of the lamp. The power will not turn on if the lamp is not secured properly. 5Close the lamp cover and tighten the screws. 6Turn the projector back over. 7Connect the power cord. The ON/ STANDBY indicator around the =/1 key lights in red. 8Press the following keys on the remote commander in the following order for less than five...
Page 43
43 GBMaintenance Maintenance 4Remove the air filter. 5Wash the air filter with a mild detergent solution and dry it in a shaded place. 6Attach the air filter and replace the cover. If you neglect to clean the air filter, dust may accumulate, clogging it. As a result, the temperature may rise inside the unit, leading to a possible malfunction or fire. If the dust cannot be removed from the air filter, replace the air filter with the supplied new one. Be sure to attach the air filter cover...
Page 44
GB 44Troubleshooting Troubleshooting If the projector appears to be operating erratically, try to diagnose and correct the problem using the following instructions. If the problem persists, consult with qualified Sony personnel. Power Picture Symptom Cause and Remedy The power is not turned on. The power has been turned off and on with the I / 1 key at a short interval. cWait for about 90 seconds before turning on the power (see page 29). The lamp cover is detached. cClose the lamp cover securely...
Page 45
45 GBTroubleshooting Maintenance Sound The picture from INPUT A connector is colored strange. Setting of “Input-A Signal Sel.” in the SET SETTING menu is incorrect. cSelect “Computer,” “Video GBR” or “Component” correctly according to the input signal (see page 38). “Please check Input-A Signal Sel.” appears in spite of inputting the correct signal from INPUT A. Setting of “Input-A Signal Sel.” in the SET SETTING menu is incorrect. cSelect “Computer,” “Video GBR” or “Component” correctly...
Page 46
GB 46Troubleshooting Remote Commander Others Warning Messages Use the list below to check the meaning of the messages displayed on the screen. Symptom Cause and Remedy The Remote Commander does not work. The Remote Commander batteries are dead. cReplace with a new battery (see page 15, 16). Symptom Cause and Remedy The LAMP/COVER indicator flashes. The lamp cover or the air filter cover is detached. cAttach the cover securely (see page 42 and 43). The lens protector does not open due to a problem....
Page 47
47 GBTroubleshooting Maintenance Caution Messages Use the list below to check the meaning of the messages displayed on the screen. Message Meaning and Remedy Not applicable! You have pressed the wrong key. cPress the appropriate key.
Page 48
GB 48On the emergency mode BOther On the emergency mode Before performing the following procedure, try to diagnose the problem using the instructions described in Troubleshooting (page 44). If the problem persists, read and following procedure thoroughly and then proceed. The projector is equipped with the emergency mode for the lens protector and the powered tilt adjuster. If the powered function does not work, you can operate the lens protector and the tilt adjuster (emergency mode)...
Page 49
49 GBSpecifications Other Specifications Optical characteristics Projection system 3 LCD panels, 1 lens, projection system LCD panel VPL-CS6: Superhigh-aperture 0.7-inch SVGA panel, 1,440,000 pixels (480,000 pixels × 3) VPL-CX6/EX1: Superhigh- aperture 0.7-inch XGA panel with micro-lens array, about 2,360,000 pixels (786,432 pixels × 3) Lens 1.2 times zoom lens (manual) VPL-CS6/CX6: f 23.0 to 27.6 mm/ F 1.8 to 2.1 VPL-EX1: f 28.2 to 33.8 mm/F 1.8 to 2.15 Lamp 165 W UHP Projection picture size...
Page 50
GB 50Specifications INPUT A HD D-sub15-pin (female) Analog RGB/component: R/R-Y: 0.7 Vp-p ±2 dB (75 ohms terminated) G: 0.7 Vp-p ±2 dB (75 ohms terminated) G with sync/Y: 1 Vp-p ±2 dB sync negative (75 ohms terminated) B/B-Y: 0.7 Vp-p ±2 dB (75 ohms terminated) SYNC/HD: Composite sync input: 1-5 Vp-p high impedance, positive/ negative Horizontal sync input: 1-5 Vp-p high impedance, positive/ negative VD: Vertical sync input: 1-5 Vp-p high impedance, positive/ negative AUDIO Stereo minijack 500...