Sony Mfm Ht205 Operating Instructions

31
US
 Option menu
You can adjust the following items using the “Option” menu.
PIP/PAP
 Caption Vision
 Input Sensing
 Language
 Menu Position
 Menu Lock
 Demo Mode
 All Reset
xSetting “PIP” (Picture In Picture) or “PAP” 
(Picture And Picture) (for PC 1/PC 2 only)
When the “PIP/PAP Setting” menu is set to “PIP On” or “PAP 
On,” pictures from two input sources are displayed on the screen 
at the same time. When “PIP On” is set, the main picture is 
displayed in full size, and the sub picture is...

32
Note
The inputs for main/sub pictures must be selected as shown below.
To change the sub picture’s size (PIP function: On)
1 Press the MENU button.
The main menu appears on the screen.
2Press the M/m buttons to select   (Option) and 
press the OK button.
The “Option” menu appears on the screen.
3Press the M/m buttons to select “PIP/PAP” and 
press the OK button.
4Press the M/m buttons to select “PIP/PAP Setting” 
and press the OK button.
The “PIP/PAP Setting” menu appears on the screen.
5Press the M/m...

33
US
xSetting “Caption Vision” (for TV/VIDEO 1/
VIDEO 2 only)
You can display Caption Vision if  the broadcaster offers this 
service.
1 Press the MENU button. The main menu appears on the screen.
2 Press the  M/m buttons to select   (Option) and 
press the OK button.
The “Option” menu appears on the screen.
3 Press the  M/m buttons to select  “Caption Vision” 
and press the OK button.
The “Caption Vision” menu appears on the screen.
4 Press the  M/m buttons to select the desired type of 
Caption...

34
xSetting “Menu Lock”
You can lock in the menu adjust ments to prevent accidental 
adjustments or resetting.
1 Press the MENU button. The main menu appears on the screen.
2Press the  M/m buttons to select    (Option) and 
press the OK button.
The “Option” menu appears on the screen.
3Press the  M/m buttons to select “Menu Lock” and 
press the OK button.
The “Menu Lock” menu appears on the screen. 
4Press the  M/m buttons to select eith er “On” or “Off”   
and press the OK button.  On: If “On” has...

35
US
Technical Features
Controlling the volume
Using the display’s speakers or headphones, you can listen to 
sound from your computer or other equipment connected to the 
display’s audio input jacks.
You can control the volume by inputting either PC 1/PC 2 or TV/
COMPONENT/VIDEO 1/VIDEO 2.
You can control the volume by using the “Volume” adjustment 
bar.
1 Press the VOL+/– buttons when there is no menu 
displayed on the screen.
2 Press the VOL+/– buttons to set the desired volume 
level.
The bar...

36
Setting the Picture Mode
You can select the Picture Mode using the   button or “Mode” 
in the “Picture” menu. 
When you select “Auto,” the disp lay automatically adjusts the 
screen brightness according to  the brightness of the surroundings 
(Automatic brightness adjust ment function). For more 
information, see “Automatic br ightness adjustment function 
(light sensor)”.
For details on using the “Mode” menu, see page 18.
For details on using th e   button, see below.
Press the   button repeatedly....

37
US
Turning off the display 
automatically 
(for TV/COMPONENT/
VIDEO 1/VIDEO 2 only)
You can set the display to turn off automatically after a 
predetermined period of time (15, 30, 45, 60, or 90 minutes).
Press the SLEEP button on  the remote control 
repeatedly.
Each time you press the  SLEEP button, the period of time changes 
as follows:
To cancel the Sleep timer
Press the SLEEP button repe atedly until “Off” appears.
Tips
 If you turn the display off, and then  turn it on again, the Sleep timer...

38
If “Cable Disconnected” appears on the screen
This indicates that the video signal cable has been disconnected 
from the currently selected  connector. After 45 seconds, the 
Power Save Mode activates.
If “Power will be turned off by off timer soon” 
appears on the screen
This indicates that the power provided to the display will be 
turned off by off timer in 1 minute.
If “Feature Not Available” appears on the screen
This indicates that the functio n which you have attempted to 
operate is not...

39
US
Trouble symptoms and remedies
If a problem occurs as a result of a connected computer or other equipment, refer to the connected computer/equipment’s instruc tion manual.
For PC 1/PC 2
Symptom Check these items
No picture.
If the  1 (power) indicator is not lit, 
or if the  1 (power) indicator will not 
light up when the  1 (power) switch 
is pressed,  Check that the power cord is properly connected.
If “Cable Disconne cted” appears on 
the screen,  Check that the video signal cable is properly...

40
Picture flickers, bounces, 
oscillates, or is scrambled. Adjust the pitch and phase (PC 2 only) (page 24).
xProblem caused by a computer or other equipment connected, and not 
caused by the display
 Check your graphics board manual for the proper display setting.
 Confirm that the graphics mode (VESA, Macintosh 19 Color, etc.) and the frequency of 
the input signal are supported by this display. Even if the frequency is within the proper 
range, some graphics boards may have a sync pulse that is...