Sony Clie Peg Nz90 Handheld Instructions Manual

							Using “Memory Stick®” media141
Exchanging data via “Memory Stick” media
Deleting data on “Memory Stick” media
You can delete the data from a “Memory Stick” media with the CLIE Files 
application.
1Insert “Memory Stick” media on your CLIÉ handheld.
2Tap the Home   icon.
3Rotate the Jog Dial™ navigator to select  CLIE Files and 
press the Jog Dial™ navigator.
The CLIE Files application starts and the list of data in the “Memory 
Stick” media is displayed. 
Tip
You can also tap the CLIE File s icon to start the application.
4Tap the data you want to delete and change   to  .
5Tap Del.
The  Delete File  dialog box is displayed.
6Tap OK.
The data selected in step 4 is  deleted from “Memory Stick” media.
Continued on next page
• • • • • • • • • • • • • • • • • • • 
						

							Using “Memory Stick®” media142
Exchanging data via “Memory Stick” media
To delete all the data at once
Tap Select  in step 4 and select  Select all.
To cancel the selection
To cancel all the selections : tap Select and select Clear all.
 To clear only specific items : tap the selected item once again.
To change the folder to be deleted
Tap   or   to select the folder you want to delete. The displays of the folders 
are changed. You can specify a folder to be deleted.
CLIE Files menus
The following describes the menus that are specific to the CLIE Files 
application.
For the menus common to the CLIÉ a pplications, refer to “Common menus” 
on page 38.
Tool menu
Format Formats (Initializes) a “Memory Stick” media 
inserted in your CLIÉ handheld. Note that all 
data stored in a “Memory Stick” media will be 
erased when formatting the “Memory Stick” 
media.
Media Info Displays information, such as the amount of 
memory or volume label, of your CLIÉ 
handheld or “Memory Stick” media.
New Dir Creates a folder under the current folder in the 
“Memory Stick” media (only when “Memory 
Stick” media is selected).
Rename Changes the name of current directory or 
folder (only when “Memory Stick” media is 
selected).
This is for “a name displayed on the 
computer.”
About CLIE Files Displays the version information of “CLIE 
Files.” 
						

							Using “Memory Stick®” media143
Exchanging data via “Memory Stick” media
Exchanging data without using the CLIE Files application
You can exchange the data between a  “Memory Stick” media and your CLIÉ 
handheld from the menu of the Application Launcher screen.
However, problems may oc cur depending on the application. Note the 
following.
 You can copy only applications. Re lated files cannot be copied.
 Data stored in the “Memory Stick” me dia (such as image files) cannot be 
displayed.
1Insert the “Memory Stick” media into the “Memory Stick” slot 
of your CLIÉ handheld.
2Tap the Menu   icon on the Application Launcher screen.
The menu is displayed.
3Tap  Copy  from the  CLIE Launcher  menu.
The Copy  dialog box is displayed.
4Tap the arrow  V next to  Copy To , and select  Handheld or 
Card . 
From  is automatically sele cted when you select  Copy To.
5Tap the application you want to copy.
6Tap Copy .
The selected applic ation is copied to CLIÉ  handheld or “Memory Stick” 
media. 
						

							Using “Memory Stick®” media144
Exchanging data via “Memory Stick” media
Notes on starting applications from a “Memory Stick” media
You can start an application (files with extensions such as .prc,.pdb) from a 
“Memory Stick” media. However, note the following prior to starting them.
 You can start only applications. Related  files such as image files or movie 
files may not be opened (played back). 
 When the data that cannot be opened  in the application is saved on the 
“Memory Stick” media, move the data  to your CLIÉ handheld or delete them 
with using the CLIE Files application.
Tip
When the data is installed in the “M emory Stick” media with the HotSync® operation, 
the data files are stored in the  /PALM/Launcher folder. 
						

							Beaming
This chapter explains how to communicate with another 
Palm OS® PDA device via the infrared communications port.
Beaming between your Sony CLIÉ handheld and  another Palm OS® PDA  . . . . . . . . . . . . .   146 
						

							Beaming146
Beaming between your Sony CLIÉ handheld and 
another Palm OS
® PDA
What you can do with beaming
Your CLIÉ handheld is equipped with an  IR (infrared) port that enables you to 
exchange data with another Palm OS® PDA device that has an IR port. The IR 
port is located at the top of your CLIÉ  handheld, behind the small dark shield.
You can beam the following informati on between your CLIÉ handheld and 
another Palm OS
® PDA device that has an IR port:
 The data of Address  Book, Date Book, To Do List, or Memo Pad.
 All data in the category currently displa yed in Address Book, To Do List, or 
Memo Pad.
 Address Book data that you de signate as your business card.
 Add-on applications inst alled in the memory.
Note
Some applications are protected from c opying and cannot be beamed. Applications 
marked with the    icon cannot be copied.
IR Port
(Location of the IR port may 
vary depending on your model.) 
						

							Beaming147
Beaming between your Sony CLIÉ handheld and another Palm OS® PDA
Beaming information
You can beam the data on your CLIÉ handheld to another Palm OS PDA 
device that has an IR port.
1Select the data, category, or business card you want to 
beam.
2Tap the Menu   icon.
3Tap one of the following:
 The Beam command fo r an individual record
 In Address Book only:  Beam Business Card
 Beam Category
4When the  Beam dialog box is displayed, point the IR port of 
your CLIÉ handheld directly to the IR port of another Palm 
OS PDA device.
Tip
For best performance of the  data exchange, keep 4 to 8 inches (approximately 10 to 
20 centimeters) from your CLIÉ handheld to another Palm OS PDA device. Do not 
place any obstacle between the devices.  The optimum distance for beaming may 
vary depending on devices.
5Wait for a while until the  Beam dialog box shows that the 
transfer is complete.
(Location of the IR port may 
vary depending on your model.) 
						

							Beaming148
Beaming between your Sony CLIÉ handheld and another Palm OS® PDA
Receiving beamed information
1Turn on your CLIÉ handheld and point the IR port of your 
CLIÉ handheld directly to the IR port of another Palm OS 
PDA device. 
The Beam  dialog box is displayed a nd beaming of data starts.
2Select the category where you want to save the received 
data. 
You can also create a new category to  save the data to, or save it in the 
Unfiled category.
3Tap  Yes.
The data is saved.
Note
When  Beam Receive  in the Preferences  screen is set to  Off, you cannot receive data 
using the beaming feature.  Prior to beaming data, set Beam Receive to On .
Tips on beaming information
 Data or applications received by beam ing are saved in the Unfiled category.
 You can press the Address Book   butt on for about two seconds to beam 
your business card.
 You can use Graffiti
® writing to beam the current entry (  then   , or 
 and then tap  ). 
						

							Using the Bluetooth™ 
function
(for Bluetooth™ built-in models only)
This chapter explains how to exchange information such as 
applications or data with another Bluetooth compatible 
device using the Bl uetooth™ function.
Exchanging data using the Bluetooth™ function
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150
What you can do with the Bluetooth™ 
function . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  150
Sending data such as image files or Date 
Book data to another CLIÉ handheld with 
the built-in Bluetooth function or Bluetooth 
Module (optional)  . . . . . . . . . . . . . . . . . . . . .  150 
						

							Using the Bluetooth™ function150
Exchanging data using the Bluetooth™ 
function
What you can do with the Bluetooth™ function
The Bluetooth function enables wireless communication within a range of 
approximately 10 meters. Y ou can use the function to exchange data between 
your CLIÉ handheld and other  Bluetooth compliant devices.
Sending data such as image files or Date Book data to another 
CLIÉ handheld with the built-in Bluetooth function or Bluetooth 
Module (optional)
1Select a file.
1Sending an image file, movie file, voice memo, or 
handwritten memo
Start CLIE Viewer, tap  the Menu   icon, select  Send… from the 
Data  menu, and tap a file you want to send.
Continued on next page
• • • • • • • • • • • • • • • • • • •