Home > Sony > PDAs > Sony Clie Peg Nz90 Handheld Instructions Manual

Sony Clie Peg Nz90 Handheld Instructions Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Sony Clie Peg Nz90 Handheld Instructions Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 980 Sony manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							121Exchanging and updating data using a HotSync® operation 
    (Other HotSync® operations)
    Performing a HotSync® operation via LAN 
    (LANSync)
    You can perform a HotSync® operation via LAN betw een your computer and 
    another computer connected to your CLIÉ handheld.
    Prior to performing a LANSync operation
    Check the following items.
     The Palm™ Desktop for CL IÉ software is installed in both computers 
    connected by the LAN.
     Your CLIÉ handheld is placed on the  cradle correctly and the cradle is 
    connected to the computer properly.
    Preparing your computer
    1Click the HotSync   icon in the Windows task tray (bottom 
    right-hand corner of the taskbar) and select  Network from 
    the shortcut menu.
    2Click the HotSync   icon in th e Windows task tray again 
    and select  Setup from the shortcut menu.
    The Setup  screen is displayed.
    3Click the  Network tab.
    4Click the check box next to  the user name for HotSync.
    5Click OK.
    To operate LANSync, you must have  network manager skills. Consult a 
    network manager prior to setting LANSync.
    LANSync via LAN
    LANYour computer
    Continued on next page• • • • • • • • • • • • • • • • • • • 
    						
    							122
    Performing a HotSync® operation via LAN (LANSync)
    Exchanging and updating data using a HotSync® operation 
    (Other HotSync® operations)
    6Place your CLIÉ handheld in the cradle and press the 
    HotSync  button.
    The computer information (Primary PC  name and Primary PC address (IP 
    address)) is transferred to your CLIÉ handheld. 
    When you perform a HotSync
    ® operation via LAN,  your CLIÉ handheld 
    identifies the computer based on the information transferred.
    Preparing your CLIÉ handheld
    Follow the steps below to set up your CLIÉ handheld for a HotSync® operation 
    via the LAN.
    1Rotate the Jog Dial™ navigator to select the HotSync icon 
    and press the Jog Dial™ navigator on the Application 
    Launcher screen. 
    The  HotSync  screen is displayed.
    Tip
    You can also tap the HotSync icon to display the  HotSync screen.
    2Tap Local .
    3Tap the Menu   icon.
    4Tap LANSync Prefs  in the Options  menu.
    The LANSync Preferences  screen is displayed.
    5Tap LANSync .
    Continued on next page
    • • • • • • • • • • • • • • • • • • • 
    						
    							123
    Performing a HotSync® operation via LAN (LANSync)
    Exchanging and updating data using a HotSync® operation 
    (Other HotSync® operations)
    6Tap  OK.
    The  HotSync  screen is displayed.
    Performing a LANSync operation
    You can perform a LANSync operation when you have prepared your 
    computer setting, CLIÉ handheld setting, and Conduit Setup. Turn on the 
    computers and start the HotSync
    ® Manager application.
    Note
    To perform a LANSync operation, both co mputers connected to the cradle and 
    performing a HotSync® are required to be set for LANSyn c. On each computer, click the 
    HotSync   icon in the Windows task tray (b ottom right-hand corner of the taskbar) 
    and make sure that Network in the shor tcut menu is selected. If not, click Network to 
    check it.
    1Rotate the Jog Dial™ navigator to select the HotSync icon 
    and press the Jog Dial™ navigator on the Application 
    Launcher screen.
    The  HotSync  screen is displayed.
    Tip
    You can also tap the HotS ync icon to display the HotSync screen.
    2Tap the HotSync   icon.
    A HotSync® operation starts. 
    The message will be displa yed to note that the HotSync® operation is 
    complete. 
    						
    							Using “Memory Stick®” 
    media
    This chapter explains how to  communicate with another 
    Palm OS® PDA device via “Memory  Stick” media, how to 
    handle “Memory Stick” media, an d how to use the CLIE Files 
    application for managing the da ta on “Memory Stick” media.
    Using “Memory Stick®” media  . . . . . . . . . . . . 125
    Exchanging data via “Memory Stick” media  . .   134 
    						
    							Using “Memory Stick®” media125
    Using “Memory Stick®” media
    What is “Memory Stick” media?
    “Memory Stick” media is a new, compact, and portable Integrated Circuit 
    recording medium with a data capacity  that exceeds a floppy disk. “Memory 
    Stick” media is specially designed  for exchanging and sharing data among 
    “Memory Stick” media comp atible products, such as a digital video camera. 
    Because it is removable, “M emory Stick” media can also  be used for external 
    data storage.
    “Memory Stick” media enables you to  exchange data between your CLIÉ 
    handheld and computer. To exchange da ta via “Memory Stick” media, your 
    CLIÉ handheld uses the suppl ied CLIE Files application.
    Types of “Memory Stick” media
    There are two types of “Memory Stick” media:
     “MagicGate Memory Stick” media,  which is equipped with “MagicGate” 
    copyright protection technology.
     “Memory Stick” media, which is not  equipped with “MagicGate” copyright 
    protection technology.
    You can use both types of “Memory St ick” media with your CLIÉ handheld. 
    However, to play ATRAC3 format files, make sure to use “MagicGate 
    Memory Stick” media.
    What is MagicGate?
    MagicGate is the copyright protection te chnology that is used for “MagicGate 
    Memory Stick” media or MagicGate compatible devices such as a CLIÉ 
    handheld. MagicGate certif ies the device and “MagicGate Memory Stick” 
    media as copyright-protect ion-compatible devices and encodes data to be 
    played back on devices. The copyrighted data cannot be played back on a 
    device not certificated.
    Note on using “MagicGate Memory Stick” media
    Do not handle copyright-pro tected files or directories stored on “MagicGate 
    Memory Stick” media with the CL IE Files  application or Windows® Explorer, 
    the file may be disabled. To handl e copyright-protected files, use a 
    “MagicGate” compliant application such as the SonicStage software.
    Continued on next page • • • • • • • • • • • • • • • • • • • 
    						
    							Using “Memory Stick®” media126
    Using “Memory Stick®” media
    Notes
    When you use a “Memory Stick Duo” with your CLIÉ handheld
     Make sure you use a “Memory Stick Duo” adapter.
     Make sure you insert a “Memory Stick Duo” into the “Memory Stick Duo” adapter in 
    the right direction.
     Do not insert a “Memory Stick Duo” adapter into the “Memory Stick” slot of your  CLIÉ handheld when a “Memory Stick Duo”  is not inserted into the adapter.
     Make sure you insert a “Memory Stick Duo”  adapter into the “Memory Stick” slot of 
    your CLIÉ handheld in the right direction. 
    						
    							Using “Memory Stick®” media127
    Using “Memory Stick®” media
    Inserting and removing a “Memory Stick” media
    Insert a “Memory Stick” media into the “Memory Stick” slot.
    While the power of your CLIÉ handheld is  on, the applications in the “Memory 
    Stick” media will be  displayed on the Applic ation Launcher screen 
    automatically if you insert the “Memory St ick” media into the slot (the feature 
    does not work when certai n application is running).
    Notes
     Insert a “Memory Stick” media in the right  direction. If it is forced in the wrong 
    direction, it may be damaged.
     Do not insert a “Memory Stick” media into  the place other than the “Memory Stick” 
    slot.
    To remove “Memory Stick” media
    Make sure that your CLIÉ handheld is  not writing to or reading data from 
    “Memory Stick” media.  Push the “Memory Stick” medi a gently into the slot to 
    release it. When the “Mem ory Stick” media has poppe d out, pick it out from 
    the slot.
    The “Memory Stick” LED blinks 
    in orange while your CLIÉ 
    handheld is accessing “Memory 
    Stick” media
    (Location of the “Memory 
    Stick” slot may vary 
    depending on your model.)
    Push “Memory Stick” media in Pull “Memory Stick” media out
    b
    Continued on next page• • • • • • • • • • • • • • • • • • • 
    						
    							Using “Memory Stick®” media128
    Using “Memory Stick®” media
    Notes on using “Memory Stick” media
    When you use “Memory Stick” media, follow the precautions below.
     Avoid touching the terminals of “Memor y Stick” media or touching it with 
    a metal object.
     Do not drop, bend, or expose “Memor y Stick” media to external shock.
     Do not disassemble or modi fy “Memory Stick” media.
     Avoid getting liquid on “M emory Stick” media.
     Avoid using or storing “Memory Stic k” media in a location subject to:
    – extremely high temperature such as  inside of a hot car, the outdoors 
    exposed to direct sunl ight, or near a heater
    – direct sunlight   – high humidity
    – corrosive substances – excessive dust
    – magnetic fields
     When storing and carrying “M emory Stick” media, keep it in its original case 
    to ensure protection  of important data.
     Make a backup of important data.
     Avoid removing “Memory Stic k” media from the insertion slot while data is 
    being written or read.
     To avoid damaging or erasing data, do not
    – pull out “Memory Stick” media or  unplug the AC power adapter while 
    formatting, or read ing or writing data.
    – use “Memory Stick” medi a in a location subject to static electricity or 
    electrical interference.
     If the battery of your CLIÉ handheld is  running short, an error message is 
    displayed and you cannot exch ange data with “Memory Stick” media. If this 
    occurs, connect the AC power adapter  or fully charge your CLIÉ handheld.
     Use the CLIE Files appl ication to format the “Memory Stick” media you use 
    in your CLIÉ handheld. If you format it  using another application, further 
    operation with your CLIÉ ha ndheld is not guaranteed.
     If you insert “Memory Stick” media th at has been formatted by another 
    application, a message prompting you to  format it is displayed. To use 
    “Memory Stick” media in your CLIÉ ha ndheld, follow the instructions to 
    format it. Note, however, that all stored data will be erased. 
    						
    							Using “Memory Stick®” media129
    Using “Memory Stick®” media
    Protecting the data on “Memory Stick” media
    To prevent accidental erasure of important data, you can use the write protect 
    tab of “Memory Stick” media. 
    Write enable position
    Slide the tab to the left to select the write enable position. You can read and 
    write data on the “M emory Stick” media.
    Write protect position (LOCK)
    Slide the tab to the right to select the  write protect position. You can only read 
    the data in the “Memory Stick” media. Select the write protect position when 
    you insert “Memory Stick” media cont aining any important data that you do 
    not want to accidentally  delete or overwrite.
    Tip
    Shape or exact location of the ta b may differ from the illustration.
    LOCK
    Back side
    Write Enable 
    Position Write Protect 
    Position 
    						
    							Using “Memory Stick®” media130
    Using “Memory Stick®” media
    Starting an application on “Memory Stick” media
    You can start the applications in “Memory Stick” media in the same way as the 
    applications of your CLIÉ handheld. While th e power of your CLIÉ handheld is on, the 
    applications in the “Memory Stick” media w ill be displayed on the Application Launcher 
    screen automatically if you in sert the “Memory Stick” media into the slot (the feature 
    does not work when certain  application is running).
    To switch from the Application Launcher screen  to the screen where the applications in 
    “Memory Stick” media are displaye d, perform the following steps.
    Tip
    You cannot start applications other than those saved in the /PALM/Launcher folder by 
    performing the following steps. 
    1Display the Application Launcher screen, while the “Memory 
    Stick” media is inserted in the CLIÉ handheld.
    2Press the BACK button to select the group.
    3Rotate the Jog Dial™ navigator to select    Card.
    The applications on “Memory  Stick” media are displayed.
    You can start an application in the same way that you start an application 
    of your CLIÉ handheld.
    If you have assigned a name  to the “Memory Stick” media, then the   
    Card  is displayed in that name.
    Tip
    You can also tap the   Card icon to select it.
    Note
    Depending on the application, so me of the features may not work. In this case, use the 
    CLIE Files application to copy the data in  the CLIÉ handheld and use the copied data. 
    						
    All Sony manuals Comments (0)

    Related Manuals for Sony Clie Peg Nz90 Handheld Instructions Manual