Sony Camera Cyber Shot Dsc Tx20 Instruction Manual

GB
11
GB
AMicrophone
BLens cover 
CFlash
DSelf-timer lamp/Smile Shutter 
lamp/AF illuminator
ELens
F (Playback) button
GMOVIE (Movie) button
HLCD screen/Touch panel
ION/OFF (Power) button
JPower/Charge lamp
KShutter button
LW/T (Zoom) lever
MHook for wrist strap
NHDMI mini jack
OMulti connector (Type3b)
PMemory card slot
QAccess lamp
RBattery eject lever
SConnector cover
TBattery/memory card cover
U (TransferJet™) mark
VBattery insertion slot
WTripod receptacle
 Use a tripod with a screw less 
than 5.5...

GB
12
Inserting the battery pack
1Open the cover.
2Insert the battery pack. Align the battery pack with the guide inside the battery insertion slot. 
Insert the battery pack until the battery eject lever locks into place.
 Securely close the battery cover until you hear the slide lock on the 
cover catch in place and so that the yellow mark under the slide lock can 
no longer be seen.
 Closing the cover with the battery inserted incorrectly may damage the 
camera.
Battery eject lever 

GB
13
GB
Charging the battery pack
1Open the connector cover and connect the camera and 
the AC Adaptor (supplied), using the multi-use terminal 
USB cable (supplied).
2Connect the AC Adaptor to the wall outlet (wall socket).The Power/Charge lamp lights orange, and charging starts.
 Turn off the camera while charging the battery.
 You can charge the battery pack even when it is partially charged.
 When the Power/Charge lamp flashes and charging is not finished, 
remove and re-insert the battery pack....

GB
14
 If the Power/Charge lamp on the camera flashes when the AC Adaptor is 
connected to the wall outlet (wall socket), this indicates that charging is 
temporarily stopped because the temperature is outside the recommended range. 
When the temperature gets back within the appropriate range, the charging 
resumes. We recommend charging the battery pack in an ambient temperature of 
between 10°C to 30°C (50ºF to 86ºF).
 The battery pack may not be effectively charged if the terminal section of the...

GB
15
GB
xCharging by connecting to a computer
The battery pack can be charged by connecting the camera to a computer using 
a multi-use terminal USB cable.
 Note the following points when charging via a computer:
– If the camera is connected to a laptop computer that is not connected to a power 
source, the laptop battery level decreases. Do not charge for an extended period 
of time.
– Do not turn on/off or restart the computer, or wake the computer to resume from 
sleep mode when a USB connection has...

GB
16
xBattery life and number of images that can be 
recorded and played back
 The above number of images applies when the battery pack is fully charged. The 
number of images may decrease depending on the conditions of use.
 The number of images that can be recorded is for shooting under the following 
conditions:
– Using Sony “Memory Stick PRO Duo” (Mark2) media (sold separately)
– The battery pack is used at an ambient temperature of 25°C (77°F).
 The number for “Shooting (still images)” is based on...

GB
17
GB
xSupplying power
The camera can be supplied with power from the wall outlet (wall socket) by 
connecting to the AC Adaptor, using the multi-use terminal USB cable 
(supplied).
You can import images to a computer without worrying about draining the 
battery pack by connecting the camera to a computer using the multi-use 
terminal USB cable.
In addition, you can use the AC Adaptor AC-UD10 (sold separately) for 
shooting to supply power when shooting.
 Power cannot be supplied when the battery pack...

GB
18
Inserting a memory card (sold separately)
1Open the cover.
2Insert the memory card (sold separately). With the notched corner facing as illustrated, insert the memory card 
until it clicks into place.
3Close the cover.
Note the notched 
corner faces correctly. 

GB
19
GB
xMemory cards that can be used
 In this manual, the products in the table are collectively referred to as follows:
A: “Memory Stick Duo” media
B: “Memory Stick Micro” media
C: SD card
D: microSD memory card
 When using “Memory Stick Micro” media or microSD memory cards with this 
camera, make sure to use with the appropriate adaptor.
xTo remove the memory card/battery pack
Memory card: Push the memory card in once to eject the memory card.
Battery pack: Slide the battery eject lever. Be sure not...

GB
20
Setting the clock
1Lower the lens cover.The camera is turned on. The power lamp lights up green only when the 
camera starts up.
Date & Time setting is displayed when you turn on the camera for the first 
time.
 You can also turn on the camera by pressing the ON/OFF (Power) 
button.
 It may take time for the power to turn on and allow operation.
2Select a desired language.
3Select a desired geographic location by following the 
on-screen instructions, then touch [Next].
4Set [Daylight Savings] or...