Sony Camera Cyber Shot Dsc Tx20 Instruction Manual

							4-420-016-21(1)
DSC-TX20
Digital Still Camera / Instruction Manual GB
Cámara fotografía digital / Manual de instrucciones ES 
						

							GB
2
The number in parentheses indicates the number of pieces.
• Camera (1)
 Rechargeable battery pack NP-BN (1)
(This rechargeable battery pack cannot be used with Cyber-shot that are 
supplied with the NP-BN1 battery pack.)
 Paint pen (1)
 Multi-use terminal USB cable (1)
 AC Adaptor AC-UB10/UB10B (1)
 Power cord (mains lead) (not supplied in the USA and Canada) (1)
 Wrist strap (1)
 Instruction Manual (this manual) (1)
 Notes on the water-proofing (1)
English
Learning more about the camera (“Cyber-shot 
User Guide”)
“Cyber-shot User Guide” is an on-line manual. Refer to it for 
in-depth instructions on the many functions of the camera.
1Access the Sony support page.
http://www.sony.net/SonyInfo/Support/
2Select your country or region.
3Search for the model name of your camera within the 
support page.
 Check the model name on the bottom of your camera.
Checking the supplied items 
						

							GB
3
GB
Owner’s RecordThe model and serial numbers are located on the bottom. Record the serial number in the 
space provided below. Refer to these numbers whenever you call your Sony dealer 
regarding this product.
Model No. DSC-TX20
Serial No.  _____________________________
Model No. AC-UB10/AC-UB10B
Serial No.  _____________________________
To reduce fire or shock hazard, do not expose the unit to rain or 
moisture.
IMPORTANT SAFETY INSTRUCTIONS
-SAVE THESE INSTRUCTIONS
DANGER
TO REDUCE THE RISK OF FIRE OR ELECTRIC 
SHOCK, CAREFULLY FOLLOW THESE 
INSTRUCTIONS
If the shape of the plug does not fit the power outlet, use an attachment plug adaptor of the 
proper configuration for the power outlet.
[Battery packIf the battery pack is mishandled, the battery pack can burst, cause a fire or even chemical 
burns. Observe the following cautions.
 Do not disassemble.
 Do not crush and do not expose the battery pack to any shock or force such as 
hammering, dropping or stepping on it.
 Do not short circuit and do not allow metal objects to come into contact with the battery 
terminals.
 Do not expose to high temperature above 60°C (140°F) such as in direct sunlight or in a 
car parked in the sun.
 Do not incinerate or dispose of in fire.
 Do not handle damaged or leaking lithium ion batteries.
WARNING
CAUTION 
						

							GB
4
 Be sure to charge the battery pack using a genuine Sony battery charger or a device that 
can charge the battery pack.
 Keep the battery pack out of the reach of small children.
 Keep the battery pack dry.
 Replace only with the same or equivalent type recommended by Sony.
 Dispose of used battery packs promptly as described in the instructions.
[AC AdaptorConnect the AC Adaptor to the nearest wall outlet (wall socket).
If some trouble occurs while using the AC Adaptor, immediately shut off the power by 
disconnecting the plug from the wall outlet (wall socket).
The power cord (mains lead), if supplied, is designed specifically for use with this camera 
only, and should not be used with other electrical equipment.
[RECYCLING LITHIUM-ION BATTERIESLithium-Ion batteries are recyclable.
You can help preserve our environment by returning your used 
rechargeable batteries to the collection and recycling location nearest 
you.
For more information regarding recycling of rechargeable batteries, 
call toll free 
1-800-822-8837, or visit http://www.rbrc.org/
Caution: Do not handle damaged or leaking Lithium-Ion batteries.
[Battery packThis device complies with Part 15 of the FCC Rules. Operation is subject to the following 
two conditions: 
(1) This device may not cause harmful interference, and (2) this device must accept any 
interference received, including interference that may cause undesired operation.
This Class B digital apparatus complies with Canadian ICES-003.
For Customers in the U.S.A. and Canada 
						

							GB
5
GB
UL is an internationally recognized safety organization.
The UL Mark on the product means it has been UL Listed.
If you have any questions about this product, you may call:
Sony Customer Information Center
1-800-222-SONY (7669).
The number below is for the FCC related matters only.
[Regulatory Information
[CAUTION
You are cautioned that any changes or modifications not expressly approved in this manual 
could void your authority to operate this equipment.
[Note:This equipment has been tested and found to comply with the limits for a Class B digital 
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in 
a residential installation. This equipment generates, uses, and can radiate radio frequency 
energy and, if not installed and used in accordance with the instructions, may cause 
harmful interference to radio communications. However, there is no guarantee that 
interference will not occur in a particular installation. If this equipment does cause harmful 
interference to radio or television reception, which can be determined by turning the 
equipment off and on, the user is encouraged to try to correct the interference by one or 
more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the 
receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
The supplied interface cable must be used with the equipment in order to comply with the 
limits for a digital device pursuant to Subpart B of Part 15 of FCC Rules.
For Customers in the U.S.A.
Declaration of ConformityTrade Name: SONY
Model No.: DSC-TX20
Responsible Party: Sony Electronics Inc.
Address: 16530 Via Esprillo,
San Diego, CA 92127 U.S.A.
Telephone No.: 858-942-2230
This device complies with Part15 of the FCC Rules. Operation is subject to the 
following two conditions: (1) This device may not cause harmful interference, and (2) 
this device must accept any interference received, including interference that may cause 
undesired operation. 
						

							GB
6
[Notice for the customers in the countries applying EU DirectivesThe manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 
108-0075 Japan. The Authorized Representative for EMC and product safety is Sony 
Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any service or 
guarantee matters please refer to the addresses given in separate service or guarantee 
documents.
This product has been tested and found compliant with the limits set out in the EMC 
Directive for using connection cables shorter than 3 meters (9.8 feet).
[AttentionThe electromagnetic fields at the specific frequencies may influence the picture and sound 
of this unit.
[NoticeIf static electricity or electromagnetism causes data transfer to discontinue midway (fail), 
restart the application or disconnect and connect the communication cable (USB, etc.) 
again.
[Disposal of Old Electrical & Electronic Equipment (Applicable in 
the European Union and other European countries with separate 
collection systems)
This symbol on the product or on its packaging indicates that this product 
shall not be treated as household waste. Instead it shall be handed over to 
the applicable collection point for the recycling of electrical and electronic 
equipment. By ensuring this product is disposed of correctly, you will help 
prevent potential negative consequences for the environment and human 
health, which could otherwise be caused by inappropriate waste handling 
of this product. The recycling of materials will help to conserve natural 
resources. For more detailed information about recycling of this product, 
please contact your local Civic Office, your household waste disposal service or the shop 
where you purchased the product.
For Customers in Europe 
						

							GB
7
GB
[Disposal of waste batteries (applicable in the European Union 
and other European countries with separate collection systems)
This symbol on the battery or on the packaging indicates that the battery 
provided with this product shall not be treated as household waste.
On certain batteries this symbol might be used in combination with a 
chemical symbol. The chemical symbols for mercury (Hg) or lead (Pb) are 
added if the battery contains more than 0.0005% mercury or 0.004% lead.
By ensuring these batteries are disposed of correctly, you will help prevent 
potentially negative consequences for the environment and human health which could 
otherwise be caused by inappropriate waste handling of the battery. The recycling of the 
materials will help to conserve natural resources.
In case of products that for safety, performance or data integrity reasons require a 
permanent connection with an incorporated battery, this battery should be replaced by 
qualified service staff only. To ensure that the battery will be treated properly, hand over 
the product at end-of-life to the applicable collection point for the recycling of electrical 
and electronic equipment.
For all other batteries, please view the section on how to remove the battery from the 
product safely.
Hand the battery over to the applicable collection point for the recycling of waste batteries.
For more detailed information about recycling of this product or battery, please contact 
your local Civic Office, your household waste disposal service or the shop where you 
purchased the product.
A moulded plug complying with BS 1363 is fitted to this equipment for your safety and 
convenience.
Should the fuse in the plug supplied need to be replaced, a fuse of the same rating as the 
supplied one and approved by ASTA or BSI to BS 1362, (i.e., marked with an   or   
mark) must be used.
If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the 
fuse cover after you change the fuse. Never use the plug without the fuse cover. If you 
should lose the fuse cover, please contact your nearest Sony service station.
Notice for customers in the United Kingdom 
						

							GB
8
About water-proof, dust-proof, and shock-proof 
performance of the camera
This camera is equipped to be water-proof, dust-proof and shock-proof. 
Damage caused from misuse, abuse or failure to properly maintain the camera 
is not covered by the limited warranty.
 This camera is water-proof/dust-proof equivalent to IEC60529 IP58. The 
camera is operable up to a water depth of 5 m for 60 minutes.
 Do not subject the camera to pressurized water, such as from a tap.
 Do not use in hot springs.
 Use the camera in the recommended operating water temperature range of 
–10°C to +40°C (14°F to 104°F).
 Conforming to MIL-STD 810F Method 516.5-Shock standards, this product 
has passed testing when dropped from a height of 1.5 m above a 5-cm thick 
plywood board
*. * Depending on use conditions and circumstances, no guarantee is made regarding 
damage to, malfunction of, or the water-proof performance of this camera.
 As for dust-proof/shock-proof performance, there is no guarantee that the 
camera will not become scratched or dented.
 Sometimes water-proof performance is lost if the camera is subjected to a 
strong shock such as from being dropped. We recommend the camera be 
inspected at an authorized repair shop for a fee.
 Accessories supplied do not meet water-proof, dust-proof, and shock-proof 
specifications.
Notes before using the camera under/near water
 Make sure that no foreign matter such as 
sand, hair, or dirt gets inside the battery/
memory card cover or multi-connector 
cover. Even a small amount of foreign 
matter may lead to water entering the 
camera. 
						

							GB
9
GB
 Confirm that the sealing gasket and its 
mating surfaces have not become scratched. 
Even a small scratch may lead to water 
entering the camera. If the sealing gasket or 
its mating surfaces become scratched, take 
the camera to an authorized repair shop to 
have the sealing gasket replaced for a fee.
 If dirt or sand gets on the sealing gasket or 
its mating surfaces, wipe the area clean with 
a soft cloth that will not leave behind any 
fibers. Prevent the sealing gasket from becoming scratched by touching it 
while charging a battery or using a cable.
 Do not open/close the battery/memory card cover or multi-connector cover 
with wet or sandy hands or near water. There is a risk this will lead to sand or 
water getting inside. Before opening the cover, perform the procedure 
described in “Cleaning after using the camera under/near water”.
 Open the battery/memory card cover and multi-connector cover with the 
camera completely dry.
 Always confirm that the battery/memory card cover and multi-connector 
cover have been securely locked.
Notes on using the camera under/near water
 The touch panel may be activated by water splashes on the screen icons. 
When using the camera under/near water, it is recommended that you hide 
the icons by touching   on the right side of the screen. Touch   for a few 
seconds to display the icons again.
 The touch panel cannot be operated underwater. Use the buttons of the 
camera to perform shooting operations.
 Do not subject the camera to shock such as from jumping into water.
 Do not open and close the battery/memory card cover or multi-connector 
cover while under/near water.
 Use a separately available housing (Marine Pack) if going more than 
5 meters under water.
 This camera sinks in water. Place your hand through the wrist strap to 
prevent the camera from sinking.
 Faint, white, circular spots may appear in under-water flash photos due to 
reflections off of floating objects. This is not a malfunction.
 Select   (Underwater) in Scene Selection to shoot underwater with less 
distortion.
 If water drops or other foreign matter is present on the lens, you will be 
unable to record clear images.
1Sealing gasket
2Surface contacting 
the sealing gasket 
						

							GB
10
 Do not open the lens cover where the sand is whirling.
Cleaning after using the camera under/near water
 Always clean the camera with water after use 
within 60 minutes, and do not open the 
battery/memory card cover or multi-connector 
cover before cleaning is finished. Sand or 
water may get inside places where it cannot be 
seen. If not rinsed, water-proof performance 
will be degraded.
 Allow the camera to sit in pure water poured 
into a cleaning bowl for about 5 minutes. Then, gently shake the camera, 
press each button, slide the zoom lever or the lens cover inside the water, to 
clean away any salt, sand or other matter lodged around the buttons or the 
lens cover.
 After rinsing, wipe away water drops with a soft cloth. Allow the camera to 
dry completely in a shady location with good ventilation. Do not blow dry 
with a hair dryer as there is a risk of deformation and/or degraded water-
proof performance.
 Wipe away water drops or dust on the memory card/battery cover or terminal 
cover with a soft dry cloth.
 This camera is constructed to drain water. Water will drain from openings 
around the ON/OFF (Power) button, zoom lever, and other controls. After 
removing from water, place the camera on a dry cloth for a while to allow 
water to drain.
 Bubbles may appear when the camera is placed under water. This is not a 
malfunction.
 The camera body may become discolored if it comes in contact with 
sunscreen or suntan oil. If the camera does come in contact with sunscreen or 
suntan oil, quickly wipe it clean.
 Do not allow the camera to sit with salt water inside or on the surface. This 
may lead to corrosion or discoloration, and degradation of water-proof 
performance.
 To maintain the water-proof performance, we recommend that once a year 
you take the camera to your dealer, or to an authorized repair shop, to have 
the sealing gasket of the battery/memory card cover, or of the multi-
connector cover replaced for a fee.