Siemens SD-192/SD-192MX AND SD-232 Programming Manual

m (continued)
If fewer than 32 lines 
are programmed, press HANG UP button after last line
has been programmed and stored.
To display and programmed lines, perform the following procedure:
Press DISPLAY and COM (5th ivory button in bottom row) in sequence
WHICH LINE 3
(01 to 32)Enterand STORE
Intercom wired
Yes or NoLine requested
iI
I
COM=YESLINE 8
Xl400
iII
Extension number of requested line (XNONE if none is assigned)
Press STORE and HANGUP buttons in sequence
SELECT HANDSET = 1Enterand STORE
OR...

SECRETARY (continued)
ANSWER PHRASE (Programmed at Secretary Stations only)
Press the 
STORE and STATUS buttons in sequence:
EXECUTIVES LINEIf theextension does not
NUFER (1st displayring here,enter BACK, and
shows highest)next extension will be
Idisplayed.
f 2IJdK, UP, DN?
I
ILast two digits of
EXECUTIVES LINE
NUMBER
I
If the extension rings here,
press the VOLUMEbutton.
Note:Pressing the VOLUME
button removes the
extension from this
secretary station.
ANSWER PHRASE?Press tone pad key which
corresponds...

Display shows the result of pressing the
8 (QZ-) key in the previous step
Continue the procedure until the phrase is finished (12 characters including
spaces maximum),then press the STORE button.
1 RING HERE? YES-1I1 NO=Z, DELAYED=3I
Enter
and STORE
II
Note:Delayed is used if the call goes to a conventional instrument (2500)
first and rings the secretary if not answered within a given 
time.
1 1 BACK, UP, DN?I 
x00
Next lower executive extension is displayed.
Repeat the procedure above for this...

SECRETARY (continued)
Press STORE and DIRECT FORWARD buttons 
.in sequqnce
If all lines. are to be
forwarded to the same
station,
ENTERand STORE
If lines are.forwarded to
different destinations,
Enter STORE
Display when just STORE
was entered in last step
I
V
I1.
ENTERand STORE
Ii
t FORWARD LINE 2I ToENTERand STORE
Repeat with every line to be forwarded.
Enter STORE to skip lines.
To display DIRECT FORWARD, perform the following procedure
Press DISPLAY and DIRECT FORWARD button in sequence
I___
1 WHICH...

2 (secv of two with several EXECUTIVES1
Note:Secretary 2 has T&R connected to pair 10 of the multiplexer.
In order to program Secretary 
2,Secretary 1 li,ne extension assignments have
to be programmed first.
Also, the intercom and power connections to the 
multiplex’er at both secretary
stations have to be complete.
Press STORE, FEATURE +, 0, # buttons in sequence.(Disregard INVALID displaybetween buttons. )
1 SELECT MASK (0- 9)IEnterand STORE
1 SELECT MODEL
t SECT - l.EXEC = 2
1 SECRETARY 1, 2 or
1...

Press DISPLAY and COM (5th ivory button in bottom row) in sequence
1 WHICH LINE 3
! (01to32)
Enterand STORE
.,.,
Intercom wired
Yes or NoLined requested
IIVV
I COM - YESLINE 8 1I Xl400
I
I
Extension number of requested line (XNONE ii none is assigned)
Press STORE and HANGUP buttons in sequence
I SELECT HANDSET = 1
1 OR HEADSET - 2
I
ENTERand STORE
.
-46- 

ANSWER PHRASE (Programmed at Secretary Stations only)
Press the STORE and STATUS buttons in sequence
EXECUTIVES LINE
NUYW(1st display
shows highest)
I
I 2 BACK, UP, DN?I 
x01 _
I
I
Last two digits of
EXECUTIVES LINE
NUMBERIf the extension does not ring here,
enter BACK, and next extension will
be displayed.
If the extension rings here, pressthe VOLUME button.
Note:Pressing the VOLUME button
removes the extension 
from
this secretary station.
/ ANSWER PHRASE?./
Press tone pad key which corresponds
to the...

,” P
I ANSWER PHRASE?I cEnter next letter on tone pad
. .
Display shows the result of pressing
the 3 key in the previous step to select
the third letter of the three choices.
II
i USE: 1% 2=2, 31 -iIISelect desired character
Display shows the result of pressing
the 8 (QZ-) key in the previous step
Continue the procedure until the phrase is finished (12 characters including
spaces maximum),then press the STORE button.
I RING HERE? YES-1
t N0=2, DELAYED-3
Enterand STORE
II
Note:Delayed is used if the call...

press STORE and DIRECT FORWARD buttons in sequence
1 FORWARD ALL
i L1NES To
If- all lines are to be
forwarded to the same
station,Enter.-
and STORE
If lines are forwarded to
different destinations,
Enter STORE
Display when just STORE
was entered in last step
1 FARD LINE 1
I
ENTERand STORE
1 FORWARD LINE 2
To
I
ENTERand STORE
Repeat with every line to be forwarded
Enter STORE to skip lines.
To display DIRECT FORWARD, perform the following procedure
Press DISPLAY and DIRECT FORWARD buttons in sequence
t...

m-o-.
-0--.
--a-.
--
I Im--I+
I Ic-4--r-4
I Ir(--4
2
OI
a0
‘0-0--fi
I.--a--\0
I.--a---v)
I‘.m.----ql
I,-B-------m
I,---0-N
I-----a4
I--
lI I--
.----
I
I I
7zaa---‘;--I””----a
--a-
--a
--
--.
.
.
mm
,I---
I N-a-l 
I;v l
--- (yIIII ma-
l---
-m
I-a
--
I-a
I-
-0-
,I
I---
IE--- m
Ii---
I---
-500