Siemens SD-192/SD-192MX AND SD-232 Programming Manual
Here you can view all the pages of manual Siemens SD-192/SD-192MX AND SD-232 Programming Manual. The Siemens manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 1
: SET - 30 PROGRAMMING MANUAL SD-192/SD-192MX AND SD-232 ‘. , .,.“\I _ 1,.. ._. ., -;_ . . I%-S30-2B Nov. 1, 1984
Page 2
- SET-38 is programmed from the Key pad in conjunction with the feature ,buttons. General/d- The STORE button is used at the end of each procedure or during a procedure to store the programmed information in the instru- ments memory. Pressing the SMREbutton in responseto a particular prompt will leave the programmed informationin tact. If nothing was programmed, it will remain blank. It is, therefore, used to skip prompts,which requireno response duringa change proce- dure. 4,tx ++The mbuttonis used...
Page 3
Part of the display will be a number as shownbelow: = Secretary 1 = Secretary 2PROGRAMMING Before programming, fill outthe database tables shown on the next several pages or the tables in the regular SET-30 documen- tation. Separate sets of tables are provided for Multiplexer(MUX) Groups (one or two secretariesand many executives) and Execu- tive/Private Secretary combinations. For stand-alone executive phones,use the portion of the Execu- tive/Private Secretary table which is applicable. A3-
Page 5
EXECUTIVE (Stand-Alone) Press STORE, FEATURE +r0, # buttons in sequence.(Disregard INVALID display between buttons.). j SELECT MASK (0Enterand STORE I ISELECT MODEL 1 SECT=l,EXEC= 2 ; Enter2-and STORE II PressSTORE and COM (3rd ivory button in bottom row) in sequence I EXTENSION FOR 1 LINE A: Enterand STORE iI (Normally not used) Enter STORE To display the programmed lines, perform the following procedure: Press DISPLAY and COM (3rd ivory button in bottom row) in sequence Enter and STORE Not applicable...
Page 6
MNC ARRANGEMENT AND DIRECT FORWARD DESTINATIONS (STAND-ATlONE EXECDTIV.!j/ Press STORE and DIRECT FORWARD buttons in sequence Ring arrangement need not be entered. Press STORE If no ring arrangement is programmed, it automatically defaults to arrangement 1. . .Descr..&ption 7 1,/Duplicate ringing.Rings both secretarys and executives phones. Delayed duplicate ringing.Rings of executives phone. After two rings, the call also rings at the secretarys phone. Executive answers.Rings only at executives phone....
Page 7
To display Ring Arrangement and Direct Forward Destination perform the following procedures: Press DISPLAY and DIRECT FORWARD buttons in sequence -Enterand STORE station to which chosen line is forwarded I V I AFWD to 1400 1 1 DUPLICATE RING /A I Ring Arrangement used -7-
Page 8
SPEED DIAL Press STORE and SPEED DIAL buttons in sequence ) y;CH,;OFIONI - &- IEnterbut do not press ISTORE unless you want to skip the next step (just change name, I not telephone number). Speed Dial Indexes 1n;fex being programmed I t l ENTER NuMBER’I II 56 digits maximum (only last 12 will be displayed in bottom row as enteredIf the instrument is to merely outdial digits, enter the tele- phone number and STORE (preceded by the PBX trunk group access code for the trunk group to be used, unless the...
Page 9
Press the SPEED DIAL button each time a change from numbers to alpha characters or vice versa is required. When the entire string of numbers and alpha characters is finished, press the STORE button.. ------e--e_I__------------------_______ 1 1 ENTER NAMEI II ‘Press tone pad Key which corresponds to the first letter or number of name (Key 1 is used for space). If no name is desired, press STORE. Note:Each numbered Key except 0 and 1 has three letters (0 Key has two letters and a dash).In order to select...
Page 10
I To display SPEED DIAL numbers perform the following procedure: Press DISPLAY and SPEED DIAL buttons in sequence Enter indexto be displayed IndexName II VV .~::;,i Number dialed(trunk group access code and address) Note: The display will show only the last 12 digits. If more than 12 digits are used, press the B&X button to view the remaining numbers. To.display the first four letters of the names for the first six speed call indexes (l-61, perform the following procedure: Press SPEED DIAL button5 6...