Sharp Xg V10xu Projector User Manual

E-50
Basic Operation
Adjusting the Sound
This projector’s audio is factory preset to standard
settings. However, you can adjust it to suit your own
preferences by adjusting the following audio settings.
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1Press MENU.
2Press ß/© to select “Audio”.
3Press ∂/ƒ to select a specific adjustment item.
4Press ß/© to move the 
mark of the selected
adjustment item to the desired setting.
5To exit from the GUI, press MENU.
•To reset all...

E-51
Basic Operation
Displaying Dual Pictures (RGB menu only)
Projector Remote ControlPicture in Picture function allows you to display two
pictures on the same screen. You can display the image
input from INPUT 4 or 5 as an inset picture overlapping
the main picture input from INPUT 1, 2 or 3.
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1Press MENU.
2Press ß/© to select “Options (1)”.
3Press ∂/ƒ to select “Pict in Pict”.
4Press ß/© to select “
” to display an inset...

E-52
Basic Operation
Reducing Image Noise (VIDEO menu only)
Projector Remote Control3D Digital Noise Reduction (3D DNR) provides high
quality images with minimal dot crawl and cross color
noise.
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1Press MENU.
2Press ß/© to select “Options (1)”.
3Press ∂/ƒ to select “3D DNR”, and then select
“
”.
4To exit from the GUI, press MENU.
•If the image is clear, select “” to prevent any blurring.
1.2.3 4.5.6
1, 4
2, 3
(GUI) On-screen...

E-53
Basic Operation
Turning On/Off the On-screen Display
This function allows you to turn on or off the on-screen
messages that appear during input select.
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1Press MENU.
2Press ß/© to select “Options (1)”.
3Press ∂/ƒ to select “OSD Display”, and then
press ©.
4Press ∂/ƒ to select the desired On-screen
Display.
5Press ENTER to save the setting.
6To exit from the GUI, press MENU. Projector Remote Control
1.2.3 4.5.6
1, 6
5 2,...

E-54
Basic Operation
Selecting a Background Image
Selecting a Startup Image
(GUI) On-screen DisplayThis function allows you to select the image displayed
when no signal is being sent to the projector.
Description of Background Images
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1Press MENU.
2Press ß/© to select “Options (1)”.
3Press ∂/ƒ to select “Background”, and then press
©.
4Press ∂/ƒ to select the background image you want
to display on the screen.
5Press ENTER to...

E-55
Basic Operation
Selecting the Economy Mode
(GUI) On-screen Display Projector
Remote ControlThese functions allow you to reduce the power
consumption when the projector is in standby mode.
Monitor Out/RS-232C Off Function
This projector consumes power when using a monitor
connected to the OUTPUT port for INPUT 1, 2 and a
computer connected to the RS-232C port. When not
using these ports, “MNTR Out/RS232C” can be set to
“
” to reduce standby power consumption.
Description of Monitor Out/RS-232C Off...

E-56
Basic Operation
Selecting the Economy Mode
ID No. Display Off Function
The LED ID number display on the rear of the projector,
used when controlling multiple projectors, can be turned
on or off.
Description of ID No. Display
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1Press MENU.
2Press ß/© to select “Options (1)”.
3Press ∂/ƒ to select “ID No. Display”, and then
press ©.
4Press ∂/ƒ to select “Display Off”, “Standby
Off” or “Display On”.
5Press ENTER to save the...

E-57
Basic Operation
Selecting the On-screen Display Language
Projector
(GUI) On-screen DisplayEnglish is the preset language for the On-screen
Display; however, this can be changed to German,
Spanish, Dutch, French, Italian, Swedish, Portuguese,
Chinese, Korean or Japanese.
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1Press MENU.
2Press ß/© to select “Language”.
3Press  ∂/ƒ to select the desired language.
4Press ENTER to save the setting. The On-screen
Display is now...

E-58
Basic Operation
Displaying the Adjustment Settings
This function can be used to display all the adjusted
settings on the screen simultaneously.
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1Press MENU.
2Press ß/© to select “Status”.
3Press ENTER to display all the adjustment
settings.
4To exit from the GUI, press MENU.Projector
MOUSEADJ.
2
3Remote Control
1.2.3 4.5.6
1, 4
2
3
INPUT 1, 2 (RGB) or 3 (DIGITAL) mode
2
3
INPUT 4, 5 (VIDEO) mode
(GUI) On-screen Display     

E-59
Useful Features &
Network Function
 
Locking the Operation Buttons on the ProjectorUseful Features
This function can be used to lock the use of certain
operation buttons on the projector. The user can still
operate the projector fully with the remote control.
Description of Keylock Levels
1.2.3 4.5.6
1, 6
5 2, 3, 4
Projector
(GUI) On-screen DisplayRemote Control
1.2.3 4.5.6
1, 6
5 2, 3, 4
This function allows you to deselect unwanted signal
input.
(Slide the MOUSE/ADJUSTMENT switch
on the remote...