Sharp Xg V10xu Projector User Manual

							E-50
Basic Operation
Adjusting the Sound
This projector’s audio is factory preset to standard
settings. However, you can adjust it to suit your own
preferences by adjusting the following audio settings.
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1Press MENU.
2Press ß/© to select “Audio”.
3Press ∂/ƒ to select a specific adjustment item.
4Press ß/© to move the 
mark of the selected
adjustment item to the desired setting.
5To exit from the GUI, press MENU.
•To reset all adjustment items, select “Reset” on the “Audio”
menu screen and press ENTER.
Description of Adjustment Items
Projector
© button ß button Selected item
Increased audio from the left
speakerIncreased audio from the right
speaker
For weaker treble
For weaker bass
Treble
Bass
ResetFor stronger treble
For stronger bass
All audio adjustment items are returned to the factory preset
settings. Balance
MOUSEADJ.
Remote Control
1.2.3 4.5.6
1, 5
2, 3, 4
2
3(GUI) On-screen Display   
						

							E-51
Basic Operation
Displaying Dual Pictures (RGB menu only)
Projector Remote ControlPicture in Picture function allows you to display two
pictures on the same screen. You can display the image
input from INPUT 4 or 5 as an inset picture overlapping
the main picture input from INPUT 1, 2 or 3.
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1Press MENU.
2Press ß/© to select “Options (1)”.
3Press ∂/ƒ to select “Pict in Pict”.
4Press ß/© to select “
” to display an inset picture
(Factory preset to INPUT 4).
•The image from INPUT 1, 2 or 3 is displayed as the main
picture and the image from INPUT 4 or 5 is displayed as
the inset picture.
•The last displayed image from INPUT 4 or 5 is displayed as
the inset picture.
For example, when you want to display the image from
INPUT 5 as the inset picture, select INPUT 5, then select
the main picture, and then select “Pict in Pict”.
5Press ß/©/∂/ƒ to move the inset picture to one
of four preset positions.
6To exit from the GUI, press MENU.
•Inset picture can only be displayed in composite signal of
NTSC/PAL/SECAM.
•When selecting the image for the inset picture, only the
images being input will be displayed.
•The audio of the insert picture will come out of the projector’s
speakers.
•Picture in Picture does not work in case of the following
RGB signals.
UXGA signal image
Interlaced signal
DTV (480P/720P/1080i)
•You can only use the following functions while in Picture in
Picture mode.
FREEZE: Works for the inset picture only.
TOOLS: Works with Picture in Picture, but the cursor is
used for TOOLS. The inset picture cannot be
moved.
1.2.3 4.5.6
1, 6
2, 3
4, 5
2(GUI) On-screen Display
4
MOUSEADJ.
0
1996 1997 1998 1999 50 100 C 150 B
200 A 250 300    
						

							E-52
Basic Operation
Reducing Image Noise (VIDEO menu only)
Projector Remote Control3D Digital Noise Reduction (3D DNR) provides high
quality images with minimal dot crawl and cross color
noise.
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1Press MENU.
2Press ß/© to select “Options (1)”.
3Press ∂/ƒ to select “3D DNR”, and then select
“
”.
4To exit from the GUI, press MENU.
•If the image is clear, select “” to prevent any blurring.
1.2.3 4.5.6
1, 4
2, 3
(GUI) On-screen Display
MOUSEADJ.    
						

							E-53
Basic Operation
Turning On/Off the On-screen Display
This function allows you to turn on or off the on-screen
messages that appear during input select.
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1Press MENU.
2Press ß/© to select “Options (1)”.
3Press ∂/ƒ to select “OSD Display”, and then
press ©.
4Press ∂/ƒ to select the desired On-screen
Display.
5Press ENTER to save the setting.
6To exit from the GUI, press MENU. Projector Remote Control
1.2.3 4.5.6
1, 6
5 2, 3, 4
(GUI) On-screen Display
Setting the Video Signal (VIDEO menu only)
1.2.3 4.5.6
1, 6
5 2, 3, 4
ProjectorThe video input system mode is preset to “Auto”;
however, it can be changed to a specific system mode
if the selected system mode is not compatible with the
connected audiovisual equipment.
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1Press MENU.
2Press ß/© to select “Options (1)”.
3Press ∂/ƒ to select “Video System”, and then
press ©.
4Press ∂/ƒ to select the desired video system
mode.
5Press ENTER to save the setting.
6To exit from the GUI, press MENU.
•When the system mode is set to “Auto”, you may not receive
a clear picture due to signal differences. Should this occur,
switch to the video system of the source signal.
•AUTO cannot be set for PAL-M and PAL-N input signals.
Select “PAL-M” or “PAL-N” in “Video System” menu for PAL-
M and PAL-N input signals.
(GUI) On-screen Display
MOUSEADJ.
Remote Control
MOUSEADJ.
Description Selected item
Normal
Level A
Level B
Description of OSD Display
All On-screen Display are displayed.
INPUT, CUSTOM, FREEZE, ENLARGE, AUTO SYNC,
VOLUME, MUTE, BLACK SCREEN are not displayed.
All On-screen Display are not displayed (except MENU,
TOOLS, LENS and warning display (Power off, Temp.,
Lamp etc.)).   
						

							E-54
Basic Operation
Selecting a Background Image
Selecting a Startup Image
(GUI) On-screen DisplayThis function allows you to select the image displayed
when no signal is being sent to the projector.
Description of Background Images
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1Press MENU.
2Press ß/© to select “Options (1)”.
3Press ∂/ƒ to select “Background”, and then press
©.
4Press ∂/ƒ to select the background image you want
to display on the screen.
5Press ENTER to save the setting.
6To exit from the GUI, press MENU.
•By selecting “Custom”, the projector can display a custom image
(i.e. your company logo) as the background image. The custom
image must be a 256-color BMP file with a picture size no larger
than 1,024  768 pixels. Please see the Sharp Advanced
Presentation Software operation manual for how to save (or change)
a custom image.
Projector
MOUSEADJ.
Remote Control
•This function allows you to specify the image to be
displayed upon the projector’s startup.
•A custom image (i.e. your company logo) can be
uploaded to the projector via an RS-232C cable. See
page 16 in this operation manual, and also the
supplied Sharp Advanced Presentation Software
operation manual for detailed instructions.
Description of Startup Images
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1Press MENU.
2Press ß/© to select “Options (1)”.
3Press ∂/ƒ to select “Startup Image”, and then press
©.
4Press ∂/ƒ to select the startup image you want to
display on the screen.
5Press ENTER to save the setting.
6To exit from the GUI, press MENU.
•By selecting “Custom”, the projector can display a custom image
(i.e. your company logo) as the startup image. The custom image
must be a 256-color BMP file with a picture size no larger than
1,024  768 pixels. Please see the Sharp Advanced Presentation
Software operation manual for how to save (or change) a custom
image.
Projector
(GUI) On-screen DisplayMOUSEADJ.
Remote Control
1.2.3 4.5.6
1, 6
5 2, 3, 4
1.2.3 4.5.6
1, 6
5 2, 3, 4
Selected item
Sharp
Custom
Blue
NoneDescription
SHARP default image
User customized image (i.e. company logo)
Blue screen
Black screen
Selected item
Sharp
Custom
NoneDescription
SHARP default image
User customized image (i.e. company logo)
Black screen   
						

							E-55
Basic Operation
Selecting the Economy Mode
(GUI) On-screen Display Projector
Remote ControlThese functions allow you to reduce the power
consumption when the projector is in standby mode.
Monitor Out/RS-232C Off Function
This projector consumes power when using a monitor
connected to the OUTPUT port for INPUT 1, 2 and a
computer connected to the RS-232C port. When not
using these ports, “MNTR Out/RS232C” can be set to
“
” to reduce standby power consumption.
Description of Monitor Out/RS-232C Off
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1Press MENU.
2Press ß/© to select “Options (1)”.
3Press ∂/ƒ to select “MNTR Out/RS232C”.
4Press ß/© to select “
” or “”.
5To exit from the GUI, press MENU.
CAUTION
•Set “MNTR Out/RS232C” to “” when using the Sharp
Advanced Presentation Software (supplied).
1.2.3 4.5.6
1, 5
2, 3, 4
On-screen Display
(GUI) On-screen Display
Automatic Power Shutoff Function
When no input signal is detected for more than 15
minutes, the projector will automatically shut off. The
on-screen message on the left will appear five minutes
before the power is automatically turned off.
Description of Automatic Power Shutoff
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1Press MENU.
2Press ß/© to select “Options (1)”.
3Press ∂/ƒ to select “Auto Power Off”.
4Press ß/© to select “
” or “”.
5To exit from the GUI, press MENU.
•“MNTR Out/RS232C” is factory preset to “”, and “Auto
Power Off” is factory preset to “”.
Power automatically shuts off after 15 minutes of no
signal input.
Automatic Power Shutoff disabled.
MOUSEADJ.
Standby power for Monitor Out/RS-232C connection
turned off.
Monitor Out/RS-232C on
MOUSEADJ.                
						

							E-56
Basic Operation
Selecting the Economy Mode
ID No. Display Off Function
The LED ID number display on the rear of the projector,
used when controlling multiple projectors, can be turned
on or off.
Description of ID No. Display
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1Press MENU.
2Press ß/© to select “Options (1)”.
3Press ∂/ƒ to select “ID No. Display”, and then
press ©.
4Press ∂/ƒ to select “Display Off”, “Standby
Off” or “Display On”.
5Press ENTER to save the setting.
6To exit from the GUI, press MENU. Projector Remote Control
1.2.3 4.5.6
1, 6
5 2, 3, 4
(GUI) On-screen Display
Reversing/Inverting Projected Images
This projector is equipped with a reverse/invert image
function which allows you to reverse or invert the pro-
jected image for various applications.
Description of Projected Images
Selected item
Front
Ceiling
Front
Rear
Ceiling
RearDescription
Normal image
Inverted image
Reversed image
Reversed and inverted image
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1Press MENU.
2Press ß/©  to select “Options (2)”.
3Press ∂/ƒ to select “PRJ Mode”, and then press
©.
4Press ∂/ƒ to select the desired projection mode.
5Press ENTER to save the setting.
6To exit from the GUI, press MENU. ProjectorMOUSEADJ.
Remote Control
1.2.3 4.5.6
1, 6
5 2, 3, 4
(GUI) On-screen Display
Display OffNot displayed Selected item Description
Displayed except when the projector is 
in standby mode.
Always displayed Standby Off
Display On
MOUSEADJ.
•This function is used for the reversed image and ceiling-
mount setups. See page 30 for these setups.   
						

							E-57
Basic Operation
Selecting the On-screen Display Language
Projector
(GUI) On-screen DisplayEnglish is the preset language for the On-screen
Display; however, this can be changed to German,
Spanish, Dutch, French, Italian, Swedish, Portuguese,
Chinese, Korean or Japanese.
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1Press MENU.
2Press ß/© to select “Language”.
3Press  ∂/ƒ to select the desired language.
4Press ENTER to save the setting. The On-screen
Display is now programed to display in the
language selected.
5To exit from the GUI, press MENU.
MOUSEADJ.
Remote Control
1.2.3 4.5.6
1, 5
2, 3
4  
						

							E-58
Basic Operation
Displaying the Adjustment Settings
This function can be used to display all the adjusted
settings on the screen simultaneously.
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1Press MENU.
2Press ß/© to select “Status”.
3Press ENTER to display all the adjustment
settings.
4To exit from the GUI, press MENU.Projector
MOUSEADJ.
2
3Remote Control
1.2.3 4.5.6
1, 4
2
3
INPUT 1, 2 (RGB) or 3 (DIGITAL) mode
2
3
INPUT 4, 5 (VIDEO) mode
(GUI) On-screen Display     
						

							E-59
Useful Features &
Network Function
 
Locking the Operation Buttons on the ProjectorUseful Features
This function can be used to lock the use of certain
operation buttons on the projector. The user can still
operate the projector fully with the remote control.
Description of Keylock Levels
1.2.3 4.5.6
1, 6
5 2, 3, 4
Projector
(GUI) On-screen DisplayRemote Control
1.2.3 4.5.6
1, 6
5 2, 3, 4
This function allows you to deselect unwanted signal
input.
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1Press MENU.
2Press ß/© to select “Options (2)”.
3Press ∂/ƒ to select “Set Inputs”, and then
press ©.
4Press ∂/ƒ to select the input you want to set to
block.
5Press ENTER to select “ON” or “OFF”.
6To exit from the GUI, press MENU.
•Input 6 can be selected only when an SDI board is installed.
Otherwise it is displayed in gray.
•When stack projecting, multi-screen projecting and so on, this
function can be used to cancel the RS-232C control.
•Up to two input signals can be blocked for both Input 1, 2, 3 or
Input 4, 5, 6.
•For details on intended purpose, see pages 67 and 68.
Deselecting Inputs
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1Press MENU.
2Press ß/©  to select “Options (2)”.
3Press  ∂/ƒ  to select “Keylock Level”, and then
press ©.
4Press  ∂/ƒ  to select the desired level.
5Press ENTER to save the setting.
6To exit from the GUI, press MENU.
•To cancel the Keylock Level, perform the above procedure using
the remote control.
•See page 61 for details using the password function.
MOUSEADJ.
Projector Remote Control
(GUI) On-screen Display
Selected item
Normal
Level A
Level BDescription
All operation buttons are functional.
Only INPUT, VOLUME, MUTE, on the
projector are available.
All operation buttons on the projector are
unavailable.
MOUSEADJ.