Sharp Xg V10xu Projector User Manual

E-30
Setup & Connections
Rear Projection
•Place a translucent screen between the projector and
the audience.
•Use the projector’s menu system to reverse the
projected image. (See page 56 for use of this
function.)
•Optimal image quality can be achieved when the projector
is positioned perpendicular to the screen with all feet flat
and level.
Projection Using a Mirror
•When the distance between the projector and screen
is not sufficient for normal rear projection, you can
use a mirror to reflect the image...

E-31
Operation Buttons
1.2.3 4.5.6
Conference Series
Selecting the Input Signal Source
Using the Operation Buttons
Muting the Sound
Press VOLUME / to adjust the volume.
Press MUTE to temporarily turn off the sound.
Press MUTE again to turn the sound back on.
1.2.3 4.5.6
Projector Remote ControlProjector Remote Control
VOLUME
buttons
MUTE
button
1.2.3 4.5.6
Projector Remote Control
INPUT
buttons
Adjusting the Volume
Press INPUT 1.2.3 or INPUT 4.5.6 again to change the
mode.
•When no signal is received,...

E-32
Operation Buttons
1.2.3 4.5.6
1, 2
This function can be used to superimpose a black
screen over the projected image.
Blacking out the Projected Image
Press BLACK SCREEN. The screen turns black and
“BLACK SCREEN” is displayed on the screen. To return
to the original projected image, press BLACK SCREEN
again.
•To use the remote control to operate this
function, slide the MOUSE/ADJUSTMENT
switch to the MOUSE position before pressing
BLACK SCREEN.
1.2.3 4.5.6
Superimposing a Black Screen
Projector...

E-33
Operation Buttons
1.2.3 4.5.6
3
2
1
3
Magnifying a Specific Portion of an Image
s
On-screen Display
Projector
This function allows you to magnify a specific portion of
an image. This is useful when you want to display a
detailed portion of the image.
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position)
1Press ENLARGE. Each time ENLARGE is
pressed, the image will be magnified.
2When the image is magnified, you can pan and
scan around the image by using ∂/ƒ/ß/©.
•ENLARGE does...

E-34
Operation Buttons
Adjusting the Picture Aspect Ratio
This function allows you to modify or customize the
picture display mode to enhance the input image.
Depending on the input signal, you can choose
NORMAL, FULL, DOT BY DOT, BORDER, STRETCH or
SMART STRETCH image.
1Press RESIZE. Each time RESIZE is pressed, the
picture mode changes as shown below.
2To return to the standard image, press UNDO
while “RESIZE” is displayed on the screen.
COMPUTERProjector Remote Control
1.2.3 4.5.62
1
2
VIDEO/DTV
480i...

E-35
Operation Buttons
Gamma Correction Function
1.2.3 4.5.6
2
1
2
•Gamma is an image quality enhancement function
that offers a richer image by brightening the darker
portions of the image without altering the brightness
of the brighter portions.
•Four gamma settings are available to allow for
differences in the images displayed and in the
brightness of the room.
•When you are displaying images with frequent, dark
scenes, such as a film or concert, or when you are
displaying images in a bright room,...

E-36
Operation Buttons
Selecting the Remote Control Mode
MOUSEADJ.
MOUSE/ADJUSTMENT switch
(Remote control)
MOUSEADJ.
Using the Remote Control as a Wireless Mouse
The remote control has the following three functions:
•Projector control
•Wireless mouse
•Laser pointer
Wireless mouse/
Laser pointerProjector control
Operating the Remote Control
Controling the Projector
Using the Wireless Mouse
Remote Control/Mouse Receiver Positioning
•The remote control can be used to control the projector within the ranges...

E-37
Operation Buttons
Be sure the supplied remote mouse receiver is connected to your computer.
Slide the MOUSE/ADJUSTMENT switch to MOUSE.
MOUSE mode buttons
Operating the Remote Control
Use as a Wireless Mouse
•For one-button mouse systems, use either the LEFT-CLICK or RIGHT-CLICK button.
•Press BACKLIGHT, and the buttons will light up. Green lights refer to mouse operations, and red lights to projector
adjustments.
Position of MOUSE/ADJUSTMENT switch
ON (RED)
MOUSE 
LASER POINTER (GREEN)
BLACK SCREEN...

E-38
Operation Buttons
Connecting the Mouse Receiver
Connecting the Remote Mouse Receiver
You can use the remote control as a remote mouse to operate computers
compatible with PS/2 or USB type mouse systems.1.2.3 4.5.6
Conference Series
1Connect one end of the supplied USB mouse control cable to the corresponding terminal on the computer.
2Connect the other end to the USB port on the remote mouse receiver.
USB port
USB mouse control
cable
QCNW-5680CEZZ
Remote mouse
receiver
RUNTK0673CEZZ
Use the USB...

E-39
Operation Buttons
Using as a Laser Pointer
Use as a Laser Pointer
Slide the MOUSE/ADJUSTMENT switch to MOUSE, and press LASER POINTER () to activate
the laser pointer.
1.2.3 4.5.6
Conference Series
LASER
POINTER
MOUSEADJ.MOUSE/ADJUSTMENT
switch
•When the button is released, the light automatically goes off.
•For safety reasons, the laser pointer automatically goes off after 1 minute of continuous use. To turn it on, release LASER
POINTER (
) and press again.
CAUTION
•Do not look into the laser...