Sharp Xg V10xu Projector User Manual

E-40
Basic Operation
Basic Operations
Projector
Using the GUI (Graphical User Interface) Menu Screen
(GUI) On-screen Display
1
INPUT 1, 2 (RGB) or 3 (DIGITAL) mode
1
INPUT 4, 5 (VIDEO) mode
4(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1Press MENU to display the INPUT 1, 2, 3, 4 or 5
mode menu bar.
2Press ß/© to select an adjustment menu on the
menu bar.
3Press ∂/ƒ to select a specific adjustment item.
4To display a single adjustment item, press ENTER
after selecting...

E-41
Basic Operation
Menu Bars
Items on the INPUT 1, 2 or 3 Mode Menu Bar
Main menuSub menuMain menuSub menu
PictureOptions
Options Fine Sync
AudioTint
30 30
Color
30 30
Sharp
30 30
ContrastLamp 1
Lamp 2 
30 30
Bright
30 30
Red
30 30
Blue
Reset
30 30
CLR Temp
Progressive Mode Signal Type
3 3
Component RGB
2D Progressive
3D Progressive
Film Mode
Auto Sync Clock
150 150

150 150
[ON/OFF]
Auto Sync Disp[ON/OFF]
Phase
60 60
H-Pos
V-Pos
Reset
Save Setting
Select Setting
Special Modes
60 60
Signal...

E-42
Basic Operation
Menu Bars
Items on the INPUT 4 or 5 Mode Menu Bar
Main menuSub menuMain menuSub menu
PictureOptions
AudioTint
30 30
Color
30 30
Sharp
30 30
ContrastLamp 1
Lamp 2 
30 30
Bright
30 30
Red
30 30
Blue
Reset
30 30
CLR Temp
Progressive Mode Signal Type
3 3
Video
Component
2D Progressive
3D Progressive
Film Mode
Economy Mode Background
[ON/OFF]Auto Power Off
ID No. DisplayMNTR Out/RS232C
[ON/OFF]
Startup ImageTreble
30 30
Balance
30 30
Bass
30 30
Reset
Sharp
Sharp Custom
Custom...

E-43
Basic Operation
Adjusting the Picture
You can adjust the projector’s picture to your prefer-
ences with the following picture settings.
Description of Adjustment Items
Projector
For less contrast
For less brightness
For less color intensity
Skin tones become purplish
For less sharpness
For weaker red
For weaker blue Selected itemFor more contrast
For more brightness
For more color intensity
Skin tones become greenish
For more sharpness
For stronger red
For stronger blue
ß button
© button
All image...

E-44
Basic Operation
Adjusting the Picture
Projector Remote ControlAdjusting the Color Temperature
This function can be used to adjust the color
temperature to suit the type of image input to the
projector (video, computer image, TV broadcast, etc.).
Decrease the color temperature to create warmer,
reddish images for natural flesh tones, or increase to
create cooler, bluish images for a brighter picture.
Description of Color Temperature
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ....

E-45
Basic Operation
Projector Remote ControlSelecting the Signal Type
This function allows you to select the input signal type
RGB (VIDEO) or COMPONENT for INPUT 1, 2, 4 or 5
port.
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1Press MENU. Menu bar and “Picture” menu
screen appear. GUI operation guide is also
displayed.
2Press ∂/ƒ to select “Signal Type”, and then
press©.
3Press ∂/ƒ to select “RGB (VIDEO)” or
“Component”.
4Press ENTER to save the setting.
5To exit from...

E-46
Basic Operation
When displaying computer patterns which are very
detailed (tiling, vertical stripes, etc.), interference may
occur between the LCD pixels, causing flickering,
vertical stripes, or contrast irregularities in portions of
the screen. Should this occur, adjust “Clock”, “Phase”,
“H-Pos” and “V-Pos” for the optimum computer image.
•Computer image adjustments can be made easily by
pressing AUTO SYNC (). See page 49 for details.
(GUI) On-screen Display
Projector
Adjusts vertical noise....

E-47
Basic Operation
Adjusting the Computer Images (RGB menu only)
Saving and Selecting Adjustment Settings
This projector allows you to store up to seven adjustment
settings for use with various computers. Once these
settings are stored, they can be easily selected each
time you connect a computer to the projector.
Saving the adjustment setting
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1Press MENU.
2Press ß/© to select “Fine Sync”.
3Press ∂/ƒ to select “Save...

E-48
Basic Operation
Adjusting the Computer Images (RGB menu only)
Special Mode Adjustment
Ordinarily, the type of input signal is detected and the
correct resolution mode is automatically selected.
However, for some signals, the optimal resolution mode
in “Special Modes” on the “Fine Sync” menu screen
may need to be selected to match the computer display
mode.
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1Press MENU.
2Press ß/© to select “Fine Sync”.
3Press ∂/ƒ to...

E-49
Basic Operation
Adjusting the Computer Images (RGB menu only)
Auto Sync Adjustment
•Used to automatically adjust a computer image.
•Auto Sync adjustment can be made manually by
pressing AUTO SYNC, or automatically by setting
“Auto Sync” to “ON” in the projector’s GUI menu.
When “Auto Sync” is set to “ON”:
•The sync adjustment is automatically made each time
the projector is turned on while connected to a com-
puter or the input selection is changed.
•The Auto Sync adjustment setting previously made...