Sharp Xg V10xu Projector User Manual

E-10
Important
InformationPart Names
Projector
Numbers next to the part names refer to the main pages in this manual where the topic is explained.
Front and Top View
LENS button POWER buttons (ON/OFF)
ENTER button
INPUT 1, 2, 3 button
FREEZE button
ENLARGE button
UNDO buttonMUTE button
VOLUME buttons (
/)
INPUT 4, 5, 6 button
GAMMA button RESIZE button AUTO SYNC button
Remote control sensor
Lens (sold separately)
Air filter (Intake vent)Carrying handle
POWER indicator
TEMPERATURE WARNING indicatorLAMP 1...

E-11
Important
Information
14
19
62
17
17
17
18
39
16
14
15
14
6268
16
3
36
63
Part Names
Projector
Numbers next to the part names refer to the main pages in this manual where the topic is explained.
Side and Rear View
Speakers
Exhaust vent
Remote control sensor
LED display (ID No.)
RS-232C INPUT port/
RS-232C OUTPUT port
AC socket
MAIN POWER switchOUTPUT port (15-pin Mini D-sub) for INPUT 1, 2/
AUDIO OUTPUT terminals for INPUT 1, 2
INPUT 1 port (15-pin Mini D-sub)/
AUDIO INPUT 1 terminals
INPUT 3 port...

E-12
Important
InformationPart Names
Inserting the batteries
13Press in on the arrow
mark and slide in the
direction of the arrow to
remove the battery cover.2Insert two AA size
batteries, making sure
the polarities match the
 and  marks inside
the battery compartment.Insert the side tabs of
the battery cover into the
slots and press the
cover in until it is
properly seated.
Battery
compartment Battery
coverBattery
cover
1.2.3 4.5.6
Conference Series
31
19
31
32
33
64
36
31
2939
3737
3240
4040
31
49...

E-13
Important
Information
Supplied Accessories
Power cord
QACCU5013CEZZ
RGB cable
QCNW-5304CEZZ
Remote control
RRMCG1564CESA
Two AA size batteries
Remote mouse receiver
RUNTK0673CEZZ
USB mouse control cable
QCNW-5680CEZZ PS/2 mouse control cable
QCNW-5113CEZZ
Extra air filter
PFILD0110CEZZTerminal cover
CCOVA1789CE01
CD-ROM
UDSKA0030CEN1
LCD projector operation manual
TINS-7222CEZZ
LCD projector quick reference
TINS-7223CEZZ
Sharp Advanced Presentation Software operation manual
TINS-7224CEZZ 

E-14
Setup & Connections
Power Supply
Connecting the Power Cord
Plug the supplied power cord into the AC socket on the side of the projector.
Projecting Computer Images
Connecting the Projector to a Computer
You can connect your projector to a computer for projection of full color computer images.
Connecting to a computer using the standard 15-pin Input
RGB cable
QCNW-5304CEZZ
1Connect one end of the supplied RGB cable to the INPUT 1 port on the
projector.
2Connect the other end to the monitor output...

E-15
Setup & Connections
Projecting Computer Images
•This projector uses a 5 BNC computer input to prevent deterioration of image quality.
•Connect the R (P
R), G/G sync (Y), B (PB), HD/C sync and VD cables (sold separately) to the correct input
terminals on the projector and an RGB switcher (sold separately) connected to the computer, or connect a 5
BNC cable (sold separately) directly from the input terminals on the projector to the computer.
Connecting to an external RGB switcher or other compatible...

E-16
Setup & Connections
Projecting Computer Images
Connecting to a computer using the RS-232C Por t
When the RS-232C port on the projector is connected to a computer with an RS-232C cable (null modem, cross
type, sold separately), the computer can be used to control the projector and check the status of the projector.
See pages 80, 81 and 82 for details.
Connect an RS-232C cable (null modem, cross type, sold separately) to the serial port on the computer.
RGB cable
QCNW-5304CEZZ
CAUTION
•Do not connect...

E-17
Setup & Connections
Watching Video Images and Laser Disc Images
Connecting to a VCR, laser disc player and other audiovisual equipment using
the BNC video Input
1Connect each BNC connector of a component or video cable to the
corresponding BNC INPUT 4 or 5 terminals on the projector.
•BNC-RCA adaptors are needed for use with RCA type cables and sources.
2Connect the other end of the cable to the corresponding terminals on a VCR
or laser disc player.
3To use the built-in audio system, connect one end...

E-18
Setup & Connections
Watching DVD and Digital TV Images
1Connect each BNC connector of a component cable to the corresponding
BNC INPUT 2 terminals on the projector.
•BNC-RCA adaptors are needed for use with RCA type cables and sources.
2Connect the other end of the cable to the corresponding terminals on a DVD
player or DTV decoder.
3To use the built-in audio system, connect one end of an audio cable (sold
separately) to the AUDIO INPUT 2 terminal on the projector.
4Connect the other end to the...

E-19
Setup & Connections
Power ON/OFF
Press the MAIN POWER switch on the side of the
projector. The POWER indicator lights up red and the
projector enters standby mode.
•When the main power is not on, the remote control cannot
be used to operate the projector.
Turning on the Main Power
TEMP LAMP2 LAMP1 POWER
21
Press POWER ON.
•The flashing green LAMP REPLACEMENT indicator
shows that the lamp is warming up. Wait until the
indicator stops flashing before operating the projector.
•If the power is turned...