Sharp Ux 510a Plain Paper Fax Machine Users Manual

Optional Hookup Settings  
If necessary, you can use the following settings to improve the response of the
answering machine hookup to incoming calls.  
Quiet Detect Time  
This function causes the fax machine to take over the line and begin reception if
a certain duration of silence is detected after the answering machine answers.  
Time selections for the period of silence are 1 to 10 seconds. Quiet Detect Time
has been set to 4 seconds at the factory. This gives the best performance with
most...

(Example)
or
3  Set the time in seconds by entering a two-
digit number from 01 to 10 (enter
01 for 1 second, 02 for 2 seconds,
etc.). To turn off the function, enter 00. 
· ·Note: We recommend that you do not
set Quiet Detect Time below 3 sec-
onds.  
4  Press the STOP key to return to the date
and time display.  
Fax reception when the answering machine fails
When this function is turned on, your fax will answer the call after 5 rings if the
answering machine for some reason fails to answer before that...

Chapter8Special
Functions
Caller ID
If you subscribe to a caller identification service from your telephone company,
you can set your fax to display the name and number of the caller while the fax
rings. The fax will also store information about unanswered calls which you can
view in the display or print out as a list. This allows you to screen your calls as
they come in, and makes it easy to respond to callers who do not leave mes-
sages.
To use the Caller ID function, set Option Setting 16 to YES and...

Display messages
One of the following messages will appear while the fax rings if caller informa-
tion is not available.
NO SERVICE No caller information was received from your telephone
company. Make sure that the telephone company has
activated your service.
CALLER-ID
ERRORNoise on the telephone line prevented reception of caller
information.
OUT OF AREA The call was made from an area which does not have a
caller identification service, or the caller’s service is not
compatible with that of your local...

3If you want to dial one of the numbers in
the list, scroll through the list until the
number appears in the display.
· ·If you want to send a fax, load the
document and then press the START
key.
· ·If you want to make a voice call, pick
up the handset or press the SPEAKER
key. Dialing will begin automatically.
(If you pressed the SPEAKER key,
pick up the handset when the other
party answers.)
4Press the STOP key when you have fin-
ished viewing the list.
To delete calls from the Caller ID list
If you...

2Press 1 to enter a number, or 2 to
clear a number. (If you pressed 2, go
to Step 4.)
3Enter the phone number, including the
area code, by pressing the number keys
(the number must be 10 digits long).
4Press the START key and then the
STOP key.
Blocking voice calls
With Caller ID turned on, you can use the Anti Junk Fax function described in
the following section to block voice calls as well as fax receptions (the Anti
Junk Fax function normally only blocks faxes).
In this case, when a voice call or a...

Blocking Reception of Unwanted Faxes
The Anti Junk Fax function allows you to block reception of faxes from parties
which you specify. This saves paper by not printing out unwanted junk faxes.
To use this function, first turn it on by setting Option Setting 14 to YES as de-
scribed in Chapter 9, and then enter the fax numbers from which you do not
want to receive faxes as shown below. If you are using the Caller ID function as
described in the previous section, you can also enter voice numbers....

4Enter the fax/voice number (max. of 20
digits).
(Example)
5Press the START key.
6Return to Step 3 to enter (or clear) an-
other number, or press STOP to exit.
Step 3 or
5553214
STOP
START
Chapter 8    Special Functions
58 

Memory
Your fax has a memory which can be used to temporarily store both incoming
and outgoing documents.
¨Approximately 39 pages of average content can be held in memory if they
are all going to be transmitted (27 pages if Option Setting 19, Error Correc-
tion Mode, is set to YES), or 30 pages if they are all received (29 pages if
Option Setting 19 is set to YES). Less can be held if any were scanned us-
ing fine or halftone resolution.
Sending documents from memory
With this function, the original...

4Press the START key if you entered a
Speed Dial number or a full number.
· ·The document will be scanned and
stored in memory. Your fax will then
dial the receiving machine and trans-
mit the document (redialling will be
done automatically if necessary).
If the memory becomes full...
If the memory becomes full while the document is being scanned, MEMORY
IS FULL will appear in the display.
¨Press the START key if you want to transmit the pages which have been
stored up to that point in memory. The...