Sharp SF 2530 User Manual

79
OPTIONAL EQUIPMENT
Misfeed removal
The copier will stop when a misfeed occurs. The misfeed ()
indicator will blink and blinking red misfeed location indicators will
indicate the approximate misfeed location.
SF-S54N 10-bin staple sorter
1
Pull the sorter lock lever and carefully slide the staple
sorter away from the copier.
2
Remove the misfed paper from the staple sorter or
from the exit area of the copier.
3
Slide the staple sorter back toward the copier and
latch it into place.
4
Open and close the...

80
OPTIONAL EQUIPMENT
SF-S56 20-bin staple sorter
1
Push the sorter release button and slide the sorter
carefully along the guides away from the copier.
2
Remove the misfed paper from the sorter or from the exit
area of the copier.
3
Slide the sorter back toward the copier and latch it into
place.
lIf theindicator is still blinking, check the inside of the copier
and remove any remaining misfed paper.
20-bin staple sorter (SF-S56)
20-BIN STAPLE SORTER (SF-S56)
Downloaded From ManualsPrinter.com Manuals 

81
OPTIONAL EQUIPMENT
Specifications
SF-S54N
No. of bins 10
Bin capacity NON-SORT: 100 sheets (top bin)
SORT/ 30 sheets (5-1/2 x 8-1/2, 8-1/2 x 11,
STAPLE 8-1/2 x 11R)
SORT: 15 sheets (8-1/2 x 14, 11 x 17)
GROUP: 20 sheets (5-1/2 x 8-1/2, 8-1/2 x 11,
8-1/2 x 11R)
15 sheets (8-1/2 x 14, 11 x 17)
Paper size Max. 11 x 17
Min.  5-1/2 x 8-1/2
Stapling capacity 30 sheets (20 lbs.)
Power supply Drawn from the copier
Weight Approx. 33.1 lbs. (15 kg) (including mounted fittings)
Dimensions 15-23/64 (W) x 21-11/32...

82
OPTIONAL EQUIPMENT
STAND/500-SHEET PAPER DRAWER (SF-D20)
STAND/1000-SHEET PAPER DRAWER (SF-D21)
These optional stands with paper trays provide the convenience of
increased paper capacity for the copier and make a choice of paper
sizes readily available for copying. Even greater paper capacity and
size flexibility are available when the stands are equipped with an
optional auxiliary 500-sheet paper drawer (SF-CM11).
The SF-D20 is available with a 500-sheet paper drawer alone or with
an optional...

83
OPTIONAL EQUIPMENT
Stand/500-sheet paper drawer (SF-D20)
1
Gently lift and pull out the 500-sheet paper drawer.
2
Fan the copy paper and insert it in the paper drawer.
lThe 500-sheet paper drawer holds up to 500 sheets of 20 lb.
paper.
lDo not load paper above the maximum height line.
3
Push the paper drawer firmly back into the copier.
Stand/1000-sheet paper drawer (SF-D21)
1
Pull out the 1000-sheet paper drawer.
2
Fan the copy paper and insert it in the paper drawer.
lThe 1000-sheet paper drawer...

84
OPTIONAL EQUIPMENT
1
Open the side cover and remove any misfed paper.
lBe sure to perform this step before pulling out either of the paper
drawers. If not, the paper may be torn as a drawer is opened.
lBe sure not to tear the misfed paper during removal.
2
Gently lift and pull out the paper drawer. Remove any
misfed paper.
 STAND/500-SHEET PAPER DRAWER (SF-D20)
 STAND/1000-SHEET PAPER DRAWER (SF-D21)
3
Close the paper drawer and the side cover.
lConfirm that theindicator has gone out.
STAND/500-SHEET...

85
OPTIONAL EQUIPMENT
STAND/500-SHEET PAPER DRAWER (SF-D20)/STAND/1000-SHEET PAPER DRAWER (SF-D21)
Specifications
Stand/500-sheet paper drawer (SF-D20)
Stand/1000-sheet paper drawer (SF-D21)
SF-D20
Paper size 8-1/2 x 11 to 11 x 17
Paper capacity 500 sheets of 20 lb. bond paper
Total of 1,000 sheets of 20 lb. bond paper with an
optional 500-sheet paper drawer installed
Weight Approx. 60 lbs. (27.2 kg)
Dimensions 23-5/8 (W) x 24-39/64 (D) x 17-49/64 (H)
(600 mm (W) x 625 mm (D) x 451 mm (H))
SF-D21
Paper...

86
OPTIONAL EQUIPMENT
MEMO
Downloaded From ManualsPrinter.com Manuals 

87
OPTIONAL EQUIPMENT
AUDITOR CODE NUMBER:
FACTORY SETTING
The following is the factory setting of the Auditor Code
Number, which must be used to access the Auditing
Programs.
Factory setting = 000
This number must be entered when accessing the Auditing
Programs for the first time. (See page 37.)
NOTE:
The Auditor Code Number is an important security number
allowing the auditing manager to configure the auditorÕs
settings.
The manager should register this code number Ñ different
from the factory setting...

99C DSC3
CINSE1807FC51
Downloaded From ManualsPrinter.com Manuals