Sharp SF 2530 User Manual

9
MAKING COPIES
One-sided copying
NORMAL COPYING
Normal copying
1
Turn the power switch on.
lIt will take about 60 seconds for the copier to warm up. After
warm-up, the START key indicator will light up, indicating that
copying is possible.
lIf the copier has been programmed in the auditing mode, the
START key  indicator will not light up and ÒÐÐÓ will appear in the
copy quantity display. Enter an assigned 3-digit account number.
See page 8.
2
Open the document cover and place an original face
down on...

10
MAKING COPIES
NORMAL COPYING
lFor manual copy density adjustment, press the EXPOSURE
key to select MANUAL and adjust with the LIGHT and DARK
keys as desired.
lFor photographs, select PHOTO and then adjust with the LIGHT
and DARK keys as desired.
6
Use the 10-key pad to enter the desired number of
copies.
lThe number will be shown in the copy quantity display.
lA single copy can be made with the initial setting, i.e., when Ò0Ó
is displayed.
lUse the clear (C) key to cancel an entry if a mistake is...

11
MAKING COPIES
NORMAL COPYING
1
Place the first original face down on the document glass
and close the document cover.
2
Press the ORIGINAL TO COPY key to select EVEN
NUMBER.
lODD NUMBER copying is only possible when copying from an
optional automatic document feeder (ADF) or reversing automatic
document feeder (RADF). (See page 55 for details.)
3
Ensure that the desired paper tray is selected.
lPaper sizes that can be used in the duplex mode are 8-1/2 x
11, 8-1/2 x 11R, 8-1/2 x 14, and 11 x 17.
4...

12
MAKING COPIES
USING THE MANUAL FEED TRAY (special paper)
The manual feed tray is used to copy onto transparency film, labels,
tracing paper, and other special purpose papers. Up to 50 sheets of
standard copy paper can be set in the manual feed tray.
lAutomatic duplex copying will not work when a non-standard sized
paper is used. If a duplex copying mode is selected and a non-
standard sized paper is used from the manual feed tray, the
corresponding one-sided mode will be selected automatically when...

13
MAKING COPIES
Two-sided copying with manual feed tray
Two-sided copies can be made using the manual feed tray.
1
Place the first original face down on the document glass
and make a copy.
lThe first side of the copy can be made using any of the paper
feed stations.
2
Replace the first original with the second original and
close the document cover.
lMake sure the first and second originals are oriented in the same
way on the document glass.
3
Turn the first copy over without changing its top-bottom...

14
MAKING COPIES
REDUCTION/ENLARGEMENT/ZOOM
Reduction and enlargement ratios can be selected either auto-
matically with the AUTO IMAGE key or manually with the reduction
(
) key, enlargement () key, or ZOOM keys. The zoom
function enables precise copy ratio selection from 50% to 200% in
1% increments.
Automatic
1
Place the original on the document glass and close the
document cover.
lThe ORIGINAL SIZE indicator for the detected size will light up.
2
Press the TRAY SELECT key to select the paper tray...

15
MAKING COPIES
Manual
1
Place the original face down on the document glass and
close the document cover.
2
Use the reduction (), enlargement () and ZOOM
keys to set the desired copy ratio.
A. Preset reduction ratios are: 95%, 77%, 64%, and 50%.
B. Preset enlargement ratios are: 121%, 129%, 141%, and
200%.
C. Zoom ratios: Any ratio from 50% to 200% can be set in 1%
increments.
lPress the reduction () key or enlargement () key to set
the approximate ratio, then press the 
 key to decrease the
ratio or...

16
MAKING COPIES
DUAL PAGE COPYING
The DUAL PAGE COPY feature produces separate copies of two
documents placed side by side on the document glass. It is
especially useful when copying books and other bound documents
and can be used with the MARGIN SHIFT feature. If an optional
duplex module is installed, this feature can also be used with two-
sided copying.
1
Place the originals on the document glass with the
center of the two pages aligned with the paper size index
 81/2. Close the document cover.
lSet...

17
MAKING COPIES
1
Place the original face down on the document glass and
close the document cover.
lIf an optional document feeder (ADF or RADF) is installed, place
the originals face up in the document feeder tray.
NOTE:
When an optional ADF or RADF is used, the amount of edge erase
will vary depending on the copy ratio. However, when the document
glass is used, the amount will be constant.
2
Press the EDGE ERASE key.
3
Ensure that the desired paper tray is selected.
lThe edge erase mode will work only...

18
MAKING COPIES
MARGIN SHIFT
The MARGIN SHIFT feature automatically shifts the text or image to
the right on one-sided copies to increase the left margin by ap-
proximate 1/4. If two-sided copying is made possible by using an
optional duplex module, the image is shifted to the right on the front
side of copies and to the left on the second side.
1
Place the original face down on the document glass and
close the document cover.
lIf an optional document feeder (ADF or RADF) is installed, place
the...