Sharp Projector Pg M25x User Manual

Easy to Use Functions
-67
Wireless Channels

What is a wireless channel?
A wireless channel is a frequency used by wireless LAN cards when communicating. 14 channels can be
used. If other wireless LAN networks are being used near the location where the projector is, make sure
that different channels have been set to avoid interference.

Assigned wireless channels
If there are no other networks that can cause interference nearby, set either 1, 6, 13, or 14.
The wireless channel set in the projector is...

68
Using a Wireless LAN PC Card
Inserting a wireless LAN PC card into the INPUT 4 slot on the projector allows you to send
images to the projector and project them via a wireless connection.
-68
Installing a Wireless
LAN PC Card
1Insert the wireless LAN PC
card into the INPUT 4 slot on
the projector.
•For details on how to install the card,
see page 31.
•When the card is inserted, the input
will automatically change to INPUT 4.
Note
•See page 75 when installing a memory
card in the projector....

Easy to Use Functions
-69
Network Settings
Note
•This section explains items that can be set in a network. A wireless connection will not be possible if these
items are not set correctly.
•Also, as there are values that must be entered in a pre-configured network, make sure to consult with your
network administrator.
Setting Up a Projector Name
This Network setting assigns a name to the pro-
jector. The default setting is “MY PROJECTOR”.
When selecting “Projector” in the net-
work menu on the menu...

70
Network Settings (cont.)
-70
5  Repeat steps 3 and 4 to enter the
remaining characters you want.
Note
•A maximum of 16 characters can be
entered
6Press .
•The settings are stored and active.
Setting the IP Address
Set the IP Address of the projector.
Set “TCP/IP” in the network menu on the
menu screen.
➝ For operating the menu screen, see
pages 50 and 52.
➝ For operating the menu screen using
the GyroRemote see pages 54 and 55.
1Press  or  to select
TCP/IP and then press 
.
2Press  or  to select
“IP...

Easy to Use Functions
-71
5Repeat steps 3 and 4 to set all
the digits.
Setting the Gateway
Select “Gateway” using the procedure in
step 1, and enter the values by repeating
the procedure in step 3 and 4.
Setting the Subnet Mask
Select “Subnet Mask” using the procedure
in step 1, and enter the values by repeating
the procedure in step 3 and 4.
6Press 
Setting the Wireless Channel
Set the wireless LAN channel so that no
interference occurs with another wireless
channel.
Select “Wireless LAN” in the...

72
Network Settings (cont.)
-72
Setting the SSID
Set the projector’s SSID.
The default setting is “SHARP_PRJ”.
Select “Wireless LAN” in the network
menu 
on the menu screen
➝ 
For operating the menu screen, see
pages 50 and 52.
➝ For operating the menu screen using
the GyroRemote see pages 54 and 55.
1Press  or  to select
“Wireless LAN” and then press .
2Press  or  to select
“SS ID” and then press 
.
3Press  or  to select
the characters you want to set.
Note
•The characters can be entered fllowing:...

Easy to Use Functions
-73
Setting the DHCP
Server
This function is set when using the DHCP
server on the projector.
Set “DHCP Server” in the network menu
on the menu screen.
➝ 
For operating the menu screen, see
pages 50 and 52.
➝ For operating the menu screen using
the GyroRemote see pages 54 and 55.
Enabling the DHCP server function
Set the “Server” in the submenu to “ON”.
Set the “Server” to “OFF” when not using
the DHCP server function.
Note
•When the DHCP server function of the
projector has been...

-74
Resetting the Network
Settings
This will return the default values of the
Network Settings.
Select “Reset” in the Network menu on
the menu screen.
➝ 
For operating the menu screen, see
pages 50 and 52.
➝ For operating the menu screen using
the GyroRemote see pages 54 and 55.
Network Settings (cont.)
Wireless LAN PC card: Troubleshooting
Check the following if you cannot connect to the network using your wireless LAN PC card.
1. Is the Link indicator o the wireless LAN PC card light?
•Lit: operating...

Easy to Use Functions
Using a Memory Card
When a memory card is installed, images stored in the memory card can be projected.
If presentation files are stored in the memory card you can make presentations using only
the projector and the memory card, without having to use a computer.
-75
Displaying of the
Contents in the Card as
an Index
1Insert the memory card into the
INPUT 4 terminal on the projector.
•For details on installing the card, see
page 31.
•The current mode will automatically
change to...

-76
2Remove the card.
•Remove the card after the message
is displayed.
•For details on how to remove the card,
see page 31.
Info
•When moving the projector, make sure that
the Eject button is pressed all the way in. If
moved with the Eject button out, the projec-
tor may be damaged.
Setting the Thumbnail
Display
You can display JPEG files and slide show VQ
files as thumbnails. Some files may not be
displayed as thumbnails.
Images files that cannot be displayed as
thumbnails or other files except images...